eVic-VT mini?

[Daisychainvaper]

it is more accurate with 316SS, but if it works fine, no need to update. Nevertheless, updating is so easy with this device that I'd risk it

 

[ThaFuzz]

Could someone give me a little information on the rebuildable coils for the ego 1 mega tank? I'm currently using the titanium coil but I've heard a lot of good things about the rebuildable. Thanks in advance, Dave

Get the clrs, WAY better than stock. I rebuilt with stainless on account of a nickel allergy and it is just as easy to build as my subtank mini. And a great way to improve the vape from the ego 1 ( stock coils dont wick fast enough. Little tip i stole the gold color positive pin from the clr ti coil that came with the kit.

 

[Eric Auer]

You can also "Downdate" to your previous version if you dont like the update.

Mine came with 3.0 installed and it seems fine to me.

Being able to set TCR is a good thing for a SS430 user like myself.

Eric

 

[Steelgirl]

I picked up a cyan colored Evic Mini TC. I really like it. Nice and small and light weight. Using my Troll RDA on it right now. I haven't used the TC mode yet. Is there a way to tell what version of update that this mod is on? I think some mods let you know when you shut down and / or power up. I may get another Evic Mini of another color. Battery swap out is a breeze !!

 

[Sptz]

What's the battery life for you guys? I'm using an LG HG2 (3000mah) with a Bellus (26g dual, 0.45ohms) at 30w and it seems like my rdna40 lasts longer? hmm : /

 

[2legsshrt]

I picked up a cyan colored Evic Mini TC. I really like it. Nice and small and light weight. Using my Troll RDA on it right now. I haven't used the TC mode yet. Is there a way to tell what version of update that this mod is on? I think some mods let you know when you shut down and / or power up. I may get another Evic Mini of another color. Battery swap out is a breeze !!

Click the fire button 20 times

 

[DavidAmonettNashville]

I picked up a cyan colored Evic Mini TC. I really like it. Nice and small and light weight. Using my Troll RDA on it right now. I haven't used the TC mode yet. Is there a way to tell what version of update that this mod is on? I think some mods let you know when you shut down and / or power up. I may get another Evic Mini of another color. Battery swap out is a breeze !!

Turn device off and then rapidly press fire button 20 times.

 

[DavidAmonettNashville]

What's the battery life for you guys? I'm using an LG HG2 (3000mah) with a Bellus (26g dual, 0.45ohms) at 30w and it seems like my rdna40 lasts longer? hmm : /

0.40 ohm ti coil vaping TC @ 30 watts& 520° consuming 10ml. Of e-liquids and I'm using two samsung blues per long day...

 

[cobalt327]

I have an ongoing issue with the device just not registering proper resistance.
When I swap tanks, I always hit the fire button and get the proper response.
Then I screw the tank on and make sure it tight.
Then I fire get the New/Old tank and press the right button to confirm it is a new tank.
Now, it will vape well. For a time. Time being 2 minutes to 3 hours or so.
Then, I get very anemic vape. Temp Protection is shown immediately. So, I unscrew the tank, hit fore, screw the tank on, choose new tank, and vape fine.
This is all at room temperature, inside. Same Crown tanks, same coils, same juice.
I've checked the 510 pin and while tight, it does float.
The device never shows incorrect resistance, just vapes very weak. When I choose new tank, it reads the same resistance as when it is weak. The resistance is correct, or at least within .02 of what it should be.
This would be annoying in the best of circumstances, but I tighten a tank really tight to see if it was the contact.
In the morning, I unscrewed the top of the tank to top it off before leaving.
Oops, the bottom of the tank unscrewed and more than half a tank dumped right down the device, me, and my desk.
Yeah, I know, always have coffee before filling tanks.

Anyway, who has any ideas for solving this resistance issue?

Be SURE the coils are spaced, and that it's not touching the chimney, if so equipped.

 

[Steelgirl]

Click the fire button 20 times

I'm on 1.02 version. Is that ok? I don't vape excessively high watts, so if the only update is to raise the watts, I'm prolly ok.

 

[ThaFuzz]

What's the battery life for you guys? I'm using an LG HG2 (3000mah) with a Bellus (26g dual, 0.45ohms) at 30w and it seems like my rdna40 lasts longer? hmm : /

Im using single .6ohm contact 26ga ss316 in a subtank mini in ss316tc mode and about 4mls of 6nic a day at 420F and a purple efest lasts almost a whole day

 

[Sptz]

Im using single .6ohm contact 26ga ss316 in a subtank mini in ss316tc mode and about 4mls of 6nic a day at 420F and a purple efest lasts almost a whole day

I haven't done extensive testing with just wattage mode but it does seem my rDna 40 lasts longer, same battery, same tank.

I'll have to test in TC mode as that should save up battery life.

 

[ShowerHead]

Be SURE the coils are spaced, and that it's not touching the chimney, if so equipped.

These are all fine, and in fact, if I put the tanks on other devices I never have a problem.

 

[Eric Auer]

What's the battery life for you guys? I'm using an LG HG2 (3000mah) with a Bellus (26g dual, 0.45ohms) at 30w and it seems like my rdna40 lasts longer? hmm : /

With a Samsung 30Q on a SS430 .44ohm coil I get around a day and a half, around 9ml of unflavoured 100% VG with around 12mg nic.

Might last longer with a Kraken on top of it:

Eric

 

[JimScotty0]

I'm on 1.02 version. Is that ok? I don't vape excessively high watts, so if the only update is to raise the watts, I'm prolly ok.

That would be the hardware version which you can't change. You need to look at the number above it which is the software version.

 

[2legsshrt]

I thought just the softwre version came up. They had a 1.02 SW version way back didn't they. Like one of the first.

 

[2legsshrt]

Yeah that was the first definately upgrade it. I don't have mine yet but I did and they came with 3.0 as will the ones I'm getting tomorrow.

 

[Jim_ MDP]

Way back in this thread we were comparing HW numbers... 1.00, 1.01, 1.03. I don't think there was a 1.02, they skipped one I believe. Don't recall which.
The software did start with something like 1.02.
Then 1.10, 1.20, 1.30/2.0, 3.0.

 

[2legsshrt]

You must've gotten an older one.

 

[2legsshrt]

Now I am basing this on what peoople have said that each upgrade got more accurate. Just go to joyetech.com then support and get the upgrade VTCmini and it gives you all the files. Unzip the main one and go for it.