eVic-VT mini?

[gerrymi]

I am not real sure about the Cuboid waiting to hear from a couple guys who got theirs. Not much bigger but heavier of course.

Pretty objective review of Cuboid and Cubis:

Joyetech Cuboid and Cubis - Full Review - Spinfuel eMagazine

get out? where'd u find em for that amount? NOT with the tank kit, right?? What the heck, cheapest I could find them a week before Xmas

I usually check this site before buying vape gear:

Vapecrawler

 

[2legsshrt]

Well got casted for new sockets for my legs. The pattern I chose is called Vapor, here it is.

 

[DavidAmonettNashville]

Pretty objective review of Cuboid and Cubis:

Joyetech Cuboid and Cubis - Full Review - Spinfuel eMagazine





I usually check this site before buying vape gear:

Vapecrawler

Geez that really was a great article on the cuboid. Thx 4 the link.

 

[Jim_ MDP]

Well got casted for new sockets for my legs. The pattern I chose is called Vapor, here it is.

LOL... I'd be having flashbacks every time I looked down.

 

[2legsshrt]

Yep they sound really good but I am happy with my minis. Just what I wanted. I think it is the same board and SW but the Cuboid does sound good. Like so many reviews I have seen they seem to talk more about the Cubis. I might have to get a couple of those. Should work just fine on the minis also. I think.

 

[Plumes.91]

Is that the microscopic pattern of the fabric that will keep the sockets held together, or is that what will-be printed on the outside of your legs? that's 1 trippy picture. when i 1st read your post, i thought you were telling-us that, that is the microscopic pattern of the fabric (Like, if the doctors/health-care-system gave you the opportunity to choose which pattern you think would be strongest) I'm guessing it's the latter, and that is the pattern that your new sockets will LOOK like? lol. Very cool sockets, man. Trippy...

 

[Plumes.91]

I usually check this site before buying vape gear: Vapecrawler

Wow that's a serious site for choosing where to grab new gear... I spent nearly 4 days going through over 24 google pages before settling on MyVaporStore, which had the Tron tank kit for just under 50 bucks. If I had known about Vapecrawler I probably would-of gotten it from the US for as-low as $45, or I would-of gotten the mod-only for $30, would-of used Vapecrawler to find the subox mini for cheaper, and I probably would-of been-able to grab two Kanger subtanks with the $$ saved.. nice site, thanks!

 

[JimScotty0]

That is what is so weird about these how much a couple of hundredths of an ohm can make on these.

I wonder what the SX450 chip will do with 4 decimal places

 

[Kandem]

Yes you can run it in power, SS316 or by using a manually input TCR.
The TCR for SS316 is 0.00092 which on the VTC Mini would be 0092, however, it does not work for me.

Tried it at 0092...kind of weak for flavour. Bumped it up to 0095 and it was a bit better. 0100 is the sweet spot for the crown tank I find. Better flavour than on SS316 mode and same amount of cloud possible a tad bit denser.

 

[Eric Auer]

In wattage mode with a Kraken, Dual SS430 coils.

Fun.

Eric

 

[Sptz]

I don't get it though. I'm running a single coil UD 316L and it's vaping absolutely perfectly with the 316L mode but If I try the supposed TCR for it, which is 92 for the VTC mini, then it hits temp control instantly and it doesn't really vape whatsoever... How does that make sense?

 

[f1vefour]

I don't get it though. I'm running a single coil UD 316L and it's vaping absolutely perfectly with the 316L mode but If I try the supposed TCR for it, which is 92 for the VTC mini, then it hits temp control instantly and it doesn't really vape whatsoever... How does that make sense?

Sounds like the coils aren't exactly 316L

 

[aldenf]

I don't get it though. I'm running a single coil UD 316L and it's vaping absolutely perfectly with the 316L mode but If I try the supposed TCR for it, which is 92 for the VTC mini, then it hits temp control instantly and it doesn't really vape whatsoever... How does that make sense?

Sounds like the coils aren't exactly 316L

It's Chinese-made SS316. The vaping gods only know what is in that alloy...

 

[Sptz]

It's Chinese-made SS316. The vaping gods only know what is in that alloy...

Has anyone tested with known "pure" 316l?

 

[2legsshrt]

Is that the microscopic pattern of the fabric that will keep the sockets held together, or is that what will-be printed on the outside of your legs? that's 1 trippy picture. when i 1st read your post, i thought you were telling-us that, that is the microscopic pattern of the fabric (Like, if the doctors/health-care-system gave you the opportunity to choose which pattern you think would be strongest) I'm guessing it's the latter, and that is the pattern that your new sockets will LOOK like? lol. Very cool sockets, man. Trippy...

What they do is the sockets are made of carbon fiber then they laminate a special spandex made for this on the outside with the pattern you want. It comes out smooth and shiny. I like the name too Vapor. There are several different patterns you can get.

 

[2legsshrt]

I only use Ti but if I vape it in Ti mode I get a much warmer vape then if I vape it at TCR366 which is the TCR for Ti01 so the TCR they have set in Ti mode is definately higher then the actual TCR for Ti01 but it still vapes well at 366.

 

[Tpat591]

I don't get it though. I'm running a single coil UD 316L and it's vaping absolutely perfectly with the 316L mode but If I try the supposed TCR for it, which is 92 for the VTC mini, then it hits temp control instantly and it doesn't really vape whatsoever... How does that make sense?

May also have to do with resistance/connectivity issues in your particular Evic VTC. I've read about issues like this in the rx200 reminiscent of the evic vtc and when the 510 was replaced with a VT 510 the problems disappeared. I'm not sure that swapout is possible with the VTC but at least you can now compensate for the anemic vape issue by adjusting the manual TCR setting and effectively eliminate the issue.

 

[f1vefour]

May also have to do with resistance/connectivity issues in your particular Evic VTC. I've read about issues like this in the rx200 reminiscent of the evic vtc and when the 510 was replaced with a VT 510 the problems disappeared. I'm not sure that swapout is possible with the VTC but at least you can now compensate for the anemic vape issue by adjusting the manual TCR setting and effectively eliminate the issue.

Until the resistance sorts itself then it will all the sudden become over powered.

 

[rallykid]

Ordered a white VTC Mini tonight from MVS. I got white because all of my other mods are black and the only Tobeco Super Tank mini I could find locally was white.

I plan to use it as something a little more stealthy, pocket friendly and less cloudy than my 3li or Reuleaux with TFV4 for work.

 

[aldenf]

Has anyone tested with known "pure" 316l?

I have not. Maybe others here have. You may also want to post the question in the "TC Beyond..." thread. Lots of guys trying all kinds of wires with many different mods. A lot of VTC Minis have been showing up their too.

TC beyond Ni200: Nickel Purity, Dicodes; Ti, SS, Resistherm NiFe30; Coefficient of Resistance