Yikes on the initial investment. I'll be in for 2 of them. You really should bump the price up a bit per unit to account for you time. 
EVOD head prototype mod for Billet Box only.
- Thread starter Big Screen D
- Start date
- th_trl_thread_readers 0
- Status
Yikes on the initial investment. I'll be in for 2 of them. You really should bump the price up a bit per unit to account for you time.
That would be against co-op rules. You cannot make any profit on any item offered in a co-op. Donations are also not allowed. The only extra cost you can add is shipping, labels and packing supplies.
Dan
Last edited:
Ok, cool so from here on out we will refer to it as the BB SABOT adapter for the ARO (Don edition)
Dan
SABOT. Perfect name.
I say let's dub it the 3D edition. Dan, Drunk, and Don. B-)
Yay Drunk_J got his in the mail today.... just waiting on first impressions
Dan
Dan
Wow awesome stuff as usual. But I'm a bit confused, when the coop starts will it be the stemmed version or the stemless version?
Stem referring to the aro heads.
Thanks.
Sent from the open road using Tapatalk.
Stem referring to the aro heads.
Thanks.
Sent from the open road using Tapatalk.
Either one will use the same heads. Just a matter of deciding which works best. There are three of us overdosing on nic putting em through the paces as we speak. I can say this, based on my observations so far, either one is a winner.
Well, my apologizes for being so late with my first impressions. Some folks here know I am on a lot of meds for my back, they just happened to make me take a longer than usual nap this afternoon.
Let me echo my first words to Don after trying this the Sabot DDD. Ok, so I will have to edit them a little for the forum.
"OMG, this (edit) thing is unbelievable! I love my Billet Box again. You are going to flip over how well this thing vapes. I am more than impressed, which says a lot coming from me!"
To answer the earlier question, I can't imagine not going with the latest revisions. Anything we can change to lessen weight or unnecessary parts, to me is a good thing provided it doesn't lessen vapor or flavor.
Anyway, much more to come, just wanted to get my first impressions up, also more pics too.
Let me echo my first words to Don after trying this the Sabot DDD. Ok, so I will have to edit them a little for the forum.
"OMG, this (edit) thing is unbelievable! I love my Billet Box again. You are going to flip over how well this thing vapes. I am more than impressed, which says a lot coming from me!"
To answer the earlier question, I can't imagine not going with the latest revisions. Anything we can change to lessen weight or unnecessary parts, to me is a good thing provided it doesn't lessen vapor or flavor.
Anyway, much more to come, just wanted to get my first impressions up, also more pics too.
Either one will use the same heads. Just a matter of deciding which works best. There are three of us overdosing on nic putting em through the paces as we speak. I can say this, based on my observations so far, either one is a winner.
10-4 on that, so yet to be determined. I rebuild all mine with vertical micro coils / cotton packed. So it no not matter to me.
Sent from the open road using Tapatalk.
Just my thoughts on that. Always used vertical micro coils too. But due to the amount of condensation being left in the upper section of the tube (talking condor version), I wondered if the large vertical micro coils I was making would allow that condensation to leak out. Now Big Screen D uses smaller micro coils, and probably wouldn't matter. So I switched to horizontal.
Oh yeah, the latest rev would also do away with the silicone washer that partially covers the wick. So some of the test I plan to do is remove that on the version I have. If the silicone washer (donut...whatever) doesn't really affect juice flow and is not needed, seems to me that the latest rev with built in ARO cup would be the route to go. Also don't know if these cups ever change from make to make, so that would be another thing to look into before deciding. Anyway, just my thoughts.
Some quick pics of some Scuba mail.
This has been shown earlier, but this weapon is mine Stem version.
Top of the stem, and the hole it goes into.
This is the now empty tank with a simulated SABOT DDD, no stem version. Never been able to vape down the entire tank with the Condor stem in the repurposed carto tank rig without having to dump at least some juice out of the top tube once below half empty. Vaped perfectly from full to empty with that GD stem drilled out.
Motley Fool says dump your carto and diver stocks ASAP
This has been shown earlier, but this weapon is mine
Stem version.
Top of the stem, and the hole it goes into.
This is the now empty tank with a simulated SABOT DDD, no stem version. Never been able to vape down the entire tank with the Condor stem in the repurposed carto tank rig without having to dump at least some juice out of the top tube once below half empty. Vaped perfectly from full to empty with that GD stem drilled out.
Motley Fool says dump your carto and diver stocks ASAP
Ok I think I got the specs right
40mm on the nose.
I have gone through half a tank so far, no gurgling, dry hits and or leaks.
Dan
40mm on the nose.
I have gone through half a tank so far, no gurgling, dry hits and or leaks.
Dan
Last edited:
Can I ask what effective wattages you guys are able to run these at? Mainly on a rebuild. Not really interested in using the tiny 34AWG wire that comes stock with a protank/aro head.
Here is a chart I posted, it depends on your resistance. I mainly run 8 watts. Usually 2.0-2.5 ohms using 32ga Kanthal.
http://www.e-cigarette-forum.com/fo...forum/357383-billet-box-974.html#post12772926
Dan
Typically I use 30 gauge. But Big D and I have both use as large as 28 gauge. Try 28 gauge on a diver...not. Anyway, this device is not your limiting factor. It is the BB. The BB will go up to 5.5 volts but 3 amps is your limiting factor. On my damn cell, but you can go from that.
Right. I use 30AWG in my Diver V1/2, because 28 is just too hard to fit with enough wraps to keep the resistance high enough. And I'm well aware of the amp limitation of the BB, but even 5.5V and 3A is 16.5W theoretically. I'm sure no one would run a Protank/ARO head at that wattage, which is why I was asking. I'm generally around 12-ish watts with a Kayfun.
I'm generally around 12-ish watts with a Kayfun.
Maybe this will help, watts and amps chart by voltage and ohms specific for the BB
Dan
Dan
- Status
Similar threads
