Evolv-ing Thread

[dwcraig1]

101 vape has Samsung 20S 18650's on sale for $3.95 plus shipping so I ordered 4. They are in San Diego County so if I order early in the morning I get it the next day.
So tonight I did a comparison of voltage drop on my hcigar Inbox between a new LG HD2 and Samsung 20S.
Firing at 65 watts the LG dropped to 3.36 volts and the Samsung dropped to 3.66 volts (25 amp vs 30 amp cells)
I'll be putting my extra HD2's in my power bank/charger I suppose.
I received my Skyline (styled) yesterday, it took me a few minutes to figure out why it came in a different box than my other two....DUH..."cause it's from Coppervape and not SXK. This is my first Coppervape product and looks better made than the SXK's (which look good too). I didn't build it yet though.

 

[Steamer861]

I received my Skyline (styled) yesterday, it took me a few minutes to figure out why it came in a different box than my other two....DUH..."cause it's from Coppervape and not SXK. This is my first Coppervape product and looks better made than the SXK's (which look good too).

I can vouch for the Copper-vape's Sky Line clone
I'v had mine for quite some time now. it works very well & no issues with it at all
I have this little drop kit on mine with a Bubble Glass. I run a single Ti coil in it, on a DNA60, it puts out nice flavour Have to say thou, I run the Hussar in a similar setup & I like the Hussar a little better, the Hussar has a PC tank But I'v learned to over look that cause it performs so well

 

[gnees]

 

[tiburonfirst]

 

[dwcraig1]

 

[mikepetro]

 

[dwcraig1]

My tracking OCD doesn't even have a chance to set in.
Tracking History
January 24, 2019, 5:40 am
Arrived at Post Office
IMPERIAL BEACH, CA 91932
Your item arrived at the Post Office at 5:40 am on January 24, 2019 in IMPERIAL BEACH, CA 91932.
January 24, 2019, 3:54 am
Departed USPS Regional Facility
SAN DIEGO CA DISTRIBUTION CENTER
January 23, 2019, 7:09 pm
Arrived at USPS Regional Facility
SAN DIEGO CA DISTRIBUTION CENTER
January 23, 2019, 5:54 pm
Accepted at USPS Origin Facility
CARLSBAD, CA 92013
January 23, 2019, 3:41 pm
Shipment Received, Package Acceptance Pending
CARLSBAD, CA 92008

 

[muzichead]

Though I quit vaping 2 years ago I continue to frequent this thread on a daily basis because of Ms. Tibs and her magnificent Morning Coffee posts, I'd just like to throw it out there that you are just crushing this Morning Coffee thing and Ms. Tibs has taught you well friend!!

 

[TrollDragon]

MY FT order has landed in Canada and already passed through customs.

The 3F order is still to leave China, hopefully it's just a "forgot to scan that one"...

 

[TrollDragon]

Just found a reclaimed header strip that fits the DNA 60, it's not your standard computer jumper size.

Gotta take the Insider out as I either have too much wick tail (lightly laying in the little divot), coil too beefy (2.5mm ID 5 wrap fused 28ga AVS SS316L), or the juice is too thick for the atty (80% VG). The fun of tuning a new atty.

 

[Steamer861]

Though I quit vaping 2 years ago I continue to frequent this thread on a daily basis because of Ms. Tibs and her magnificent Morning Coffee posts, I'd just like to throw it out there that you are just crushing this Morning Coffee thing and Ms. Tibs has taught you well friend!!

Have to Agree on that one! I would like that post 100 times if I could

@gnees

Just found a reclaimed header strip that fits the DNA 60, it's not your standard computer jumper size.

Gotta take the Insider out as I either have too much wick tail (lightly laying in the little divot), coil too beefy (2.5mm ID 5 wrap fused 28ga AVS SS316L), or the juice is too thick for the atty (80% VG). The fun of tuning a new atty.

It's easy to over wick the Insider, I run a tinny little coil, with minimal wick.
Looks like a tinny Bowtie

 

[TrollDragon]

It's easy to over wick the Insider, I run a tinny little coil, with minimal wick.
Looks like a tinny Bowtie

Excellent, I will wind it back some with a single 26ga Unk Ti build.

 

[Steamer861]

Best Price I'v seen https://www.vaporl.com/lost-vape-drone-bf-dna-250c-squonk-box-mod-8ml.html?sscid=11k3_n9ieh
Still preorder! So a long wait likely, with the Chinese New Year coming up fast!

 

[dwcraig1]

Best Price I'v seen https://www.vaporl.com/lost-vape-drone-bf-dna-250c-squonk-box-mod-8ml.html?sscid=11k3_n9ieh
Still preorder! So a long wait likely, with the Chinese New Year coming up fast!

Fri, Feb 1, 2019 – Sat, Feb 9, 2019
I'm figuring after

 

[dwcraig1]

Then there's this:
Index of /
It's been a few days now.

 

[bsidb]

have one of theseSXthese SKSquonk 200C VAPE Mod - legendgadget along with 250c for it on the way to me, anyone know about the middle select button if it will work as it is or what the deal is because it doesn't move with this board thats now in it

 

[Steamer861]

Fri, Feb 1, 2019 – Sat, Feb 9, 2019
I'm figuring after

FT is saying Chinese New Year = Jan 29th - Feb 11
Then the back log, thing won't get back to normal till March
Even now if it's not, "ships next day" or "in-stock", it wont ship till after the New Year
Not the best time to be ordering from China!

 

[AtmizrOpin]

have one of theseSXthese SKSquonk 200C VAPE Mod - legendgadget along with 250c for it on the way to me, anyone know about the middle select button if it will work as it is or what the deal is because it doesn't move with this board thats now in it

I've done a total of 5 of these SXK Boxer 20700 squonk DNA 250c conversions for myself and friends. The bottom part of the select button needs to be be shaved, then it works just fine with a 250C.

To avoid installation headaches, it's also a good idea to carve out/ shave a little of the screen cradle (where it mates with the board's edges). You'll see when you take it apart. One side of the cradle edge can "crush off" the USB current sense amp and its input filter capacitor. They're a nightmare to reflow back onto the board if you do knock them off. If you run into anything or have a question feel free to PM me.

And thanks for the link......ordered 2.

 

[BillW50]

I've done a total of 5 of these SXK Boxer 20700 squonk DNA 250c conversions for myself and friends.

Hi friend!

 

[Steamer861]

I've done a total of 5 of these SXK Boxer 20700 squonk DNA 250c conversions for myself and friends. The bottom part of the select button needs to be be shaved, then it works just fine with a 250C.

To avoid installation headaches, it's also a good idea to carve out/ shave a little of the screen cradle (where it mates with the board's edges). You'll see when you take it apart. One side of the cradle edge can "crush off" the USB current sense amp and its input filter capacitor. They're a nightmare to reflow back onto the board if you do knock them off. If you run into anything or have a question feel free to PM me.

And thanks for the link......ordered 2.

I to have one SXK Boxer clone coming I have a question for you.
Did you have to ground the board to the 510 - ?
I have some nice pics of a swap that was done, but there is no pic of the negative /ground from the board to the 510, is it not necessary?

The pic isn't mine, I D/L'ed it from the net. You can see it's hard to tell if there is a negative/ground to the 510?