Evolv-ing Thread

[kiba]

View attachment 816833
HANA MODZ DNA 250 200 75 Do It Yourself ( DIY ) Mod kit Billet 11 colors | eBay
You will need to add the balance socket for 200 or 250.

I've actually built one of those Hana's before but is there something like what's on analog box mods for dual 20/18650? Or maybe a sled somewhere that I can use with that kit? I want to do the color screen chip.

Sent from my SM-G955U using Tapatalk

 

[Steamer861]

I've actually built one of those Hana's before but is there something like what's on analog box mods for dual 20/18650? Or maybe a sled somewhere that I can use with that kit? I want to do the color screen chip.

Sent from my SM-G955U using Tapatalk

The "ABM1" from Analog Box mods is a decent little box for a 75c.
They have a sled for it that uses a 2X700, I have one myself

This is a size comparison to a Hana mod

 

[ShamrockPat]

Steamer861 the Dvarw has arrived. NOW I understand why I needed that ST top section.
I'm sicker than a dog but will post a pic hopefully by Monday with new orings of course.

 

[Steamer861]

Steamer861 the Dvarw has arrived. NOW I understand why I needed that ST top section.
I'm sicker than a dog but will post a pic hopefully by Monday with new orings of course.

What do think about how it vapes? I use the biggest Air Insert & love the vape!
It's such a nice smooth draw, absolutely no flooding or leaking! Some may not like the Plastic tank? For me it's a great atty for very little money!

My new toy showed up today Stuck in Customs for 9 days
21700 Mosfet Mec mod! It's so small for a 21700 battery mod
Takes Me back to a day Round mods were normal
I may pick up another ? Next week is FT anniversary 20% off Site wide Sale!
You can see how small it is compared to a BB & an ERM

 

[ShamrockPat]

What do think about how it vapes? I use the biggest Air Insert & love the vape!
It's such a nice smooth draw, absolutely no flooding or leaking! Some may not like the Plastic tank? For me it's a great atty for very little money!

I haven't even washed it yet. I built my little Berserker mtl RDA, but at it's widest airflow ...... damn it's tight, and it really is meant for a squonker.

 

[kiba]

The "ABM1" from Analog Box Mods is a decent little box for a 75c.
They have a sled for it that uses a 2X700, I have one myself

This is a size comparison to a Hana mod

I would go dna75, but the last time I had one I had to take batteries with me to work etc., does 2x700 make a big difference?

Sent from my SM-G955U using Tapatalk

 

[Steamer861]

I would go dna75, but the last time I had one I had to take batteries with me to work etc., does 2x700 make a big difference?

Sent from my SM-G955U using Tapatalk

Yes it does, a 2x700 is a lot better than an 18650, but not as good as 2 18650's!

Why do you want the "C" Chip? You are aware that the screens are problematic?
The 250c drains the battery when it sits around, they have more than their fair share of issues.
The old DNA 250 is the best choice IMO. FT still has a few, with the 20% sale coming up a good deal can be had, just saying

 

[BillW50]

Why do you want the "C" Chip? You are aware that the screens are problematic?

I use both. I also have 17 spare color screens and I never had to replace one yet.

The 250c drains the battery when it sits around, they have more than their fair share of issues.

I have batteries in my 250C since February and some older than that. And they still have a charge.

The old DNA 250 is the best choice IMO. FT still has a few, with the 20% sale coming up a good deal can be had, just saying

I love all of my DNA mods. From DNA20 to 250/250C and I use them all of the time. Although my DNA60s and DNA75s are getting more use lately. Just saying.

 

[BillW50]

 

[SlickWilly]

I use both. I also have 17 spare color screens and I never had to replace one yet.

I have batteries in my 250C since February and some older than that. And they still have a charge.

I love all of my DNA mods. From DNA20 to 250/250C and I use them all of the time. Although my DNA60s and DNA75s are getting more use lately. Just saying.

I love the original 200's, have a bunch of those and the 75's, been using more of the 75's lately, have both in those hana zbbmods. I just grab a mod when I need a fully charged, I can't tell the difference between them unless I check, they both vape equally well. All of them are still working great except for one 200 that stopped charging but luckily that one is in one of my DX mods that uses the swap out battery packs so it's not an issue since I have others to charge the battery's with.

But you speak of the 60's and that reminds me, a couple months ago the ZNA mod I put a 60 in was working like a champ then I knocked it over on my desk, it just flopped on it's side, not like a drop to the floor but since then, when I vape it pulses at about a half second steady rate. I can watch it on escribe and see the pulse in the voltage being used, visual check shows nothing out of place, a hard reboot and new battery doesn't help, not sure what to do short of replacing it. Anyone see one of these 60's pulse like that?

 

[tiburonfirst]

 

[dwcraig1]

 

[dwcraig1]

 

[awsum140]

Bill, I built a couple of dual 20700-DNA75Cs. In terms of battery life I was getting 2+ days out of them using the 4250mah Samsungs. My problem with both of them is that the screens have failed multiple times and I got tired of tearing them apart to replace screens, it's a big PITA. The mod, itself, and how the 75C works is great though. As with everything vape related, YMMV.

 

[Steamer861]

I got tired of tearing them apart to replace screens, it's a big PITA.

You & Me both! I have had 6 colour screen failures Even thou I had bought some extra screens & Evolv sent me 3 replacements, it's a Giant PIA to keep replacing them! The C chip has a bit more on board functionality, I will admit, it don't vape any better than a 200/250

 

[Steamer861]

So just an FYI, for anyone looking for a deal on a DNA mod
FT still has 2 DNA models with dual 18650 & triple 18650, these are older DNA250's!
https://www.fasttech.com/products/3032/10031146/7154000 This is the dual at $88.59, less 20% with the sale coming up would only be around $71

This one https://www.fasttech.com/products/3032/10031146/7948500 triple 18650 at $93.94 less 20% around $75

With the up coming sale at FT, these 2 are the best DNA mod deal I can find any were! Even trying to make your own, short of the Hana on Ebay, there is no better deal out there

 

[kiba]

Yes it does, a 2x700 is a lot better than an 18650, but not as good as 2 18650's!

Why do you want the "C" Chip? You are aware that the screens are problematic?
The 250c drains the battery when it sits around, they have more than their fair share of issues.
The old DNA 250 is the best choice IMO. FT still has a few, with the 20% sale coming up a good deal can be had, just saying

My gf mostly,TC is problematic for her without the replay, not to mention she constantly forgets the button commands for the regular-screen dna's... & for me it's just easier (troubleshooting & escribe stuff-wise) if we have the same thing.


Now that I think about it, if I can't find a lv paranormal in stock, I'm actually wanting to build one more (for fun) & I'm not really worried about cost since I haven't bought a mod in almost 2yrs... looking at this 2x700 one from protovapor, anybody tried one of these yet?

Sent from my SM-G955U using Tapatalk

 

[dwcraig1]

My gf mostly,TC is problematic for her without the replay, not to mention she constantly forgets the button commands for the regular-screen dna's... & for me it's just easier (troubleshooting & escribe stuff-wise) if we have the same thing.


Now that I think about it, if I can't find a lv paranormal in stock, I'm actually wanting to build one more (for fun) & I'm not really worried about cost since I haven't bought a mod in almost 2yrs... looking at this 2x700 one from protovapor, anybody tried one of these yet?

Sent from my SM-G955U using Tapatalk

I thought these were for an 18650 cell only, how about posting a link to it?

 

[Steamer861]

That Mod/Case is an 18650 Proto used to sell this Silo DNA 75C billet aluminum DNA mod case
It fitted a 2x700 with a 3D printed sled from SW. They were very nice enclosures, but out of Stock now

I found a few LV 250c's instock in Canada The prices are in CAD so it's a lot less in USD! If they will ship to US? Mite be expensive!
https://bigcloudvaporbar.ca/product/lost-vape-paranormal-dna-250c/
LOST VAPE - Paranormal DNA 250C Box Mod

 

[kiba]

I thought these were for an 18650 cell only, how about posting a link to it?

Yep, you're right the kit is for 18650 I must of read it wrong

XPV DNA-75C DIY Kit

That Mod/Case is an 18650 Proto used to sell this Silo DNA 75C billet aluminum DNA mod case
It fitted a 2x700 with a 3D printed sled from SW. They were very nice enclosures, but out of Stock now

I found a few LV 250c's instock in Canada The prices are in CAD so it's a lot less in USD! If they will ship to US? Mite be expensive!
https://bigcloudvaporbar.ca/product/lost-vape-paranormal-dna-250c/
LOST VAPE - Paranormal DNA 250C Box Mod

Sweet, I'll check what shipping would cost... Only thing is, last time I ordered vape stuff from Canada though I think it got confiscated, just never showed up then got a letter from border patrol or something almost 6m later.

Sent from my SM-G955U using Tapatalk