When I get home from work I'm going to see how much juice a Boro box with Xeta inside will hold. A very respected reviewer said it holds 4.5 ml, I find that hard to believe so......
Edit: 4.5 ml isn't too far fetched perhaps providing everything inside was dry.
Mine (dumped the last few drops) took 3.75 ml leaving bubble about 7 mm.
Edit: 4.5 ml isn't too far fetched perhaps providing everything inside was dry.
Mine (dumped the last few drops) took 3.75 ml leaving bubble about 7 mm.
Last edited:
You might get 0.75ml more if you get rid of the bubble. I fill many of my stuff without leaving air. They say you have a greater chance of leaks without leaving any air and I believe it. But if the wicking is right, the odds are pretty low.
It's a (was) 7 mm bubble when flat against the glass, not at top or in corner. It's pretty small. I have no desire as to leave any space on a KF or any tank, just trying not to make a mess.
Edit: not to include the ones that compress the liquid when screwing the top on, those I would start the cap on and turn it upside down to finish.
Last edited:
My drop kit for Skyline has finally stopped touring LA and is just down the street a few blocks. It didn't make it soon enough for today's delivery so Monday it will arrive.
I had these FreeMax Mesh SS316L coils for months and I finally got around to trying one. I only vaped 2ml through it but the TC is doing very well and it vapes and taste great. Don't know if they use nickel legs yet since I have not created a graph and calibrated all of the temperature ranges. But using a TCR of .00112 is pretty close.Do the new mesh coils do TC? Unlikely we will see any in Ti? So off my radar
Geez... you can order 18650 cells at Walmart now. Even Samsung 25R.
https://www.walmart.com/ip/For-Samsung-18650-25R-2500mAh-3-7V-lithium-battery-single/511730371
https://www.walmart.com/ip/For-Samsung-18650-25R-2500mAh-3-7V-lithium-battery-single/511730371
This happened this afternoon next door to my work place.
13 People Detained in Human Smuggling Attempt in Coronado
13 People Detained in Human Smuggling Attempt in Coronado
Well I was wrong, when my drop kit left San Diego it went to Santa Barbra instead of Imperial beach. That's way up the coast. It has since departed there so maybe I'll still get it on Monday...unless it goes to New York or something.
October 5, 2019, 6:57 pm
Departed USPS Regional Facility
SANTA BARBARA CA DISTRIBUTION CENTER
Your item departed our USPS facility in SANTA BARBARA CA DISTRIBUTION CENTER on October 5, 2019 at 6:57 pm. The item is currently in transit to the destination.
October 5, 2019, 6:52 pm
Arrived at USPS Regional Facility
SANTA BARBARA CA DISTRIBUTION CENTER
October 5, 2019, 3:38 am
Arrived at USPS Regional Facility
SAN DIEGO CA DISTRIBUTION CENTER
October 5, 2019, 1:20 am
Departed USPS Regional Facility
LOS ANGELES CA INTERNATIONAL DISTRIBUTION CENTER
October 4, 2019, 9:37 pm
Inbound Out of Customs
Inbound Into Customs
October 2, 2019, 4:02 pm
Arrived at USPS Regional Facility
LOS ANGELES CA INTERNATIONAL DISTRIBUTION CENTER
Inbound Into Customs
October 1, 2019, 8:25 pm
Processed Through Facility
ISC LOS ANGELES CA (USPS)
This is just the US part, the China part looks as expected.
Departed USPS Regional Facility
SANTA BARBARA CA DISTRIBUTION CENTER
Your item departed our USPS facility in SANTA BARBARA CA DISTRIBUTION CENTER on October 5, 2019 at 6:57 pm. The item is currently in transit to the destination.
October 5, 2019, 6:52 pm
Arrived at USPS Regional Facility
SANTA BARBARA CA DISTRIBUTION CENTER
October 5, 2019, 3:38 am
Arrived at USPS Regional Facility
SAN DIEGO CA DISTRIBUTION CENTER
October 5, 2019, 1:20 am
Departed USPS Regional Facility
LOS ANGELES CA INTERNATIONAL DISTRIBUTION CENTER
October 4, 2019, 9:37 pm
Inbound Out of Customs
Inbound Into Customs
October 2, 2019, 4:02 pm
Arrived at USPS Regional Facility
LOS ANGELES CA INTERNATIONAL DISTRIBUTION CENTER
Inbound Into Customs
October 1, 2019, 8:25 pm
Processed Through Facility
ISC LOS ANGELES CA (USPS)
This is just the US part, the China part looks as expected.
My 2nd Zeta styled is sporting a 3 strand 28 gauge SS316 Clapton, seems to do well but I still prefer the 2 strand twisted 28 SS430.
I did end up pushing some of the ends of the tails to the inside, not much though.
I did end up pushing some of the ends of the tails to the inside, not much though.
I'll have to dig out my roll of Unk 28ga SS430, it hasn't seen any love in a long while. Twisted would make a perfect coil for the Russian Fusion tank.
I have beat my head and beat my head but finally got there. After a lot of trying this and that that included many clean installs I got there. Steps: install server 2003, download SP1, SP2, IE8 on another computer to USB drive, install SP1, SP2, IE8, go to add/remove, select windows components, under IE enhanced security uncheck "for admin", in IE8 tools>IE oprions>advanced>security> uncheck Check for publisher's certificate revocation & Check for server certificate revocation, save, restart umpteenth time, set automatic updates to on, cmd line wuauclt /detectnow to force updates, install the first round of 256 updates when they finally download. At that point you can activate windows, IE works, and windows update on IE works. Then you can actually get to the numerous other updates. Next Clone that drive! Then install DHCP, DNS, Active Directory, Adv routing, WINs server, and hopefully get the settings, users, computers, etc exactly the same for the domain so we can log in to the network. Then Clone that drive! I love how windows makes it so simple....said no one ever.
For the curious...
FreeMax Mesh Pro (single Kanthal mesh) @ 32 watts
36 puffs per ml
Lasted for 60ml worth of juice (2160 puffs)
FreeMax Mesh Pro (single SS316L mesh) @ 390°F / 45 watts
72 puffs per ml
Unknown yet, 10ml through it so far @ 720 puffs
FreeMax Mesh Pro (single Kanthal mesh) @ 32 watts
36 puffs per ml
Lasted for 60ml worth of juice (2160 puffs)
FreeMax Mesh Pro (single SS316L mesh) @ 390°F / 45 watts
72 puffs per ml
Unknown yet, 10ml through it so far @ 720 puffs
Similar threads
- Locked
