My Question is who pays for it? The tax payer? To enforce who's agenda? BT's?how much manpower does this take?
This has me a little confused? isn't this a new product? post 08/08/16?
SwitchBox DNA 75 - New Additions - Devices
This has me a little confused? isn't this a new product? post 08/08/16?
SwitchBox DNA 75 - New Additions - Devices
Maybe, maybe not. One approach, that was employed by many (including myself) was to get at least one single device made, marketed, and sold prior to 8/8. It didnt "have" to be in production yet, but to satisfy the letter of the law it had to be "marketed" prior to 8/8.
I can tell you that in the last days Evolv rushed a pre-production batch of 60s and 250s to manufacturers and enthusiasts in order to allow them to get at least one product out there.
For example, this was publicly sold on a well known Face-like site on 8/7.
This technically makes it a pre-existing product, or more specifically, NOT a new post 8/8 product.
SwitchBox (and many others) may well have done the same thing, and what we are seeing now is the actual production ramp up.
Last edited:
There doesn't seem to be a thread on ECF (can't find it) about rebuilding these Kanger v2 disposible heads so I'm posting a bit about it here. Over at a place that starts with a "V" there is something.
Anyway my wife just has to have her ST Nano but these genuine Kanger heads are a real piece of shirt. So I rebuild a couple making them horizontal with a respectable wick and coil. The little part is always left over.
The head is before I "fix" it.
My head deal vapes great.
Anyway my wife just has to have her ST Nano but these genuine Kanger heads are a real piece of shirt. So I rebuild a couple making them horizontal with a respectable wick and coil. The little part is always left over.
The head is before I "fix" it.
My head deal vapes great.
Making them horizontal? I've rebuilt a few of those for my wife, they were horizontal. They must have made some vertical I'm guessing?There doesn't seem to be a thread on ECF (can't find it) about rebuilding these Kanger v2 disposible heads so I'm posting a bit about it here. Over at a place that starts with a "V" there is something.
Anyway my wife just has to have her ST Nano but these genuine Kanger heads are a real piece of shirt. So I rebuild a couple making them horizontal with a respectable wick and coil. The little part is always left over.
The head is before I "fix" it.
My head deal vapes great.
All the newer ones are vertical, these come apart from the bottom...the older ones come apart from the top. The ones I'm rebuilding have just a wee bit of wick to them when stock....very poor.
I might do a tutorial of sorts and post where it needs to be.
typical snip
I pulled out my DX200 with Serpent the other day...been using it ever since.
I pulled out my DX200 with Serpent the other day...been using it ever since.
Both the wife and myself have a new mod coming this week, she's getting an iStick 30, me I ain't saying.
I thought about giving her my SDNA75 but she doesn't seem interested with it...she likes that little thing.
(don't say it)
I thought about giving her my SDNA75 but she doesn't seem interested with it...she likes that little thing.
(don't say it)
Women.... My wife likes to admire my mods, then I'll get her one or give her mine, then she complains it's too big, it's too heavy, it's too complicated.
After I'm not sure how many attempts, she is using a dna200 believe it or not... She's using a 3D printed (c-frame mion box) with a 1400mah lipo, because it's a printed box it's light. And she's using a Griffin 25mm. Though she still smokes.
she smokes way more than Vapes. She does 12mg, I've tried her on 18mg but she says that's too strong... Bottom line until she's ready to WANT to vape, she'll continue to smoke. I've given up.
DittoWomen.... My wife likes to admire my mods, then I'll get her one or give her mine, then she complains it's too big, it's too heavy, it's too complicated.
After I'm not sure how many attempts, she is using a dna200 believe it or not... She's using a 3D printed (c-frame mion box) with a 1400mah lipo, because it's a printed box it's light. And she's using a Griffin 25mm. Though she still smokes.
Mrs Bad was never a smoker and doesn't really get why I need more than one e-cig, but she is very happy I switched. She's supportive, although I occasionally have to explain why I need to have the wire cutters, drill etc out for a couple of hours. And is suitably impressed when tell her I have not smoked 60k fags which cost nearly thirty grand over the last 4 years, but I know she would probably stab me if I showed her all the invoices. (I don't think I spend much, >20% of the cost of smoking, but monies tight ATM)Women.... My wife likes to admire my mods, then I'll get her one or give her mine, then she complains it's too big, it's too heavy, it's too complicated.
After I'm not sure how many attempts, she is using a dna200 believe it or not... She's using a 3D printed (c-frame mion box) with a 1400mah lipo, because it's a printed box it's light. And she's using a Griffin 25mm. Though she still smokes.
I managed to convert my wife to DNAs and RBAs fairly easily. It went in steps, first Foggers on iSticks to get her off iClears. Then a DNA200/ERM+ (1300mah). Now, she's using the ERM+, a Proto ERM with a DNA75 while she's out and a Movkin Disguiser while in the house. All of them have Fogger V4.1s on them. While the maintenance to the RBAs is low, I am mixing more often due to higher liquid consumption, but that's a reasonable trade off. I only mix once a month to keep us both well stocked, about 500ml at a time.
So, I've been thinking of getting a new RDA. I'm happy with my 2 Aromamizer RTAs and my Avid Vaper Velocity RDA. But I feel like I need a 2nd dripper and am just reaching out to consider alternatives to just buying an Avid Vaper Velocity V2 (I'm a fan of the improvements over the original).
The few "new" RDAs I've researched all seem optimized for horizontal coils, something I don't like (I know, I'm weird). Any suggestions?
TIA
The few "new" RDAs I've researched all seem optimized for horizontal coils, something I don't like (I know, I'm weird). Any suggestions?
TIA
FYI, got this email today;
ETA: Four gallons shipped to me in NY figured out to be just a tad over $17 a gallon.
We currently have a 30% OFF Shipping Promo code exclusively for all VG/PG 4 Gallon Glycube orders to aid you in stocking up for the holiday season.
The Promo Code is SHIP30
Click Here to purchase glycubes and use Promo Code SHIP30 at checkout to secure a 30% discount on shipping.
ETA: Four gallons shipped to me in NY figured out to be just a tad over $17 a gallon.
We currently have a 30% OFF Shipping Promo code exclusively for all VG/PG 4 Gallon Glycube orders to aid you in stocking up for the holiday season.
The Promo Code is SHIP30
Click Here to purchase glycubes and use Promo Code SHIP30 at checkout to secure a 30% discount on shipping.
Sweet Ginger Brown
I bought a DIY kit from Nude Nic. months ago and still haven't opened the box it came in. But I may just go ahead and buy one of these 4 packs.
Similar threads
- Locked
