I use Flavour Art Peach, I mix it @ 7% & 3% Vanilla Bean Ice Cream from TPA.
I find it's real easy to loss the peach taste if mixing it with all most any thing else.
My mix hides the Vanilla Bean taste & just brings out the Peach flavour
I find it's real easy to loss the peach taste if mixing it with all most any thing else.
My mix hides the Vanilla Bean taste & just brings out the Peach flavour
Its funny, I am actually not a huge peach person. Peach cobbler, pie, ice cream, take it or leave it. But peach vape just really seems to hit the spot.
So just like every other good new thing that comes out in the vape world, Every other manufacture is making a "Big Clapton Deck" atty like the Pharaoh.
Here are 2 I think have potential & I have ordered. I will like all ways, post a run down with an opinion on both these when they arrive
The Pharaoh works good, but it's all press fit together not the best build quality for the long run.
Maybe one of the these 2 will be better made & still work as well as the Pharaoh
Here are 2 I think have potential & I have ordered. I will like all ways, post a run down with an opinion on both these when they arrive
The Pharaoh works good, but it's all press fit together
not the best build quality for the long run.Maybe one of the these 2 will be better made & still work as well as the Pharaoh
All colours are 24 hour ship on 3F
Thats were I ordered mine about a week ago My shipping status is, @ left originating Country now
Search - 3FVape
It says 36.00,but there like 23.99 with the promotional price
Thats were I ordered mine about a week ago
My shipping status is, @ left originating Country now Search - 3FVape
It says 36.00,but there like 23.99 with the promotional price
Last edited:
I could do that, but changing labels is a PITA. I use P-Touch with 1/4" tape for the wire type and that stuff sticks like heck to SS or glass tanks.
Now I'll wait on that Pharaoh until you guys review the Ammit. The Bachelor is a press fit and I just went nuts with one after dropping the mod with it. It's working fine again but was a PITA to get everything lined up properly again.
Now I'll wait on that Pharaoh until you guys review the Ammit. The Bachelor is a press fit and I just went nuts with one after dropping the mod with it. It's working fine again but was a PITA to get everything lined up properly again.
I have a spreadsheet with all my mods and atomizers with coil material as well as juices in each. I used to track each refill but that was a PITA so I just have date of new coil and when I rewick (sometimes).
I used to do the SS thing (actually is an Access DB) for everything from juice recipes to atty builds, to current atty contents, to charge cycles on my batteries.
I dont any more. I have about 10 mods and attys in rotation, if one starts tasting or feeling "off" I set it aside and grab another. When the "aside" pile gets big enough I just rebuild them all in one siting.
I just want to vape, I do enough "inventory management" at work.
About the only thing I am still .... about labeling is anything in a bottle, i.e. juices, and juice ingredients. I will be precise about nic and PG/VG but I pretty much just "wing" the flavorings when I use them.
It was just getting to be too much "work", and I know when something is "off" now without having to look it up in the database.
I dont any more. I have about 10 mods and attys in rotation, if one starts tasting or feeling "off" I set it aside and grab another. When the "aside" pile gets big enough I just rebuild them all in one siting.
I just want to vape, I do enough "inventory management" at work.
About the only thing I am still .... about labeling is anything in a bottle, i.e. juices, and juice ingredients. I will be precise about nic and PG/VG but I pretty much just "wing" the flavorings when I use them.
It was just getting to be too much "work", and I know when something is "off" now without having to look it up in the database.
That's why I stopped tracking refills. Otherwise, updating my SS when I rebuild is easy when I remember .
I have about 14 mods in daily rotation with various flavors but in the last few months, I've been reaching for 3-4 flavors. After having to replace the lipo in my VS DNA200, I've kept all my lipo mods at 20-40% when not used so I have to plan ahead a bit to use them.
I mostly use 100ml and 120ml bottles and I use a label maker for all of them.
. I have about 14 mods in daily rotation with various flavors but in the last few months, I've been reaching for 3-4 flavors. After having to replace the lipo in my VS DNA200, I've kept all my lipo mods at 20-40% when not used so I have to plan ahead a bit to use them.
I mostly use 100ml and 120ml bottles and I use a label maker for all of them.
After having the boards for too long and having the enclosures for almost too long I FINALLY got these two DNA250s together, one for me and one for the Mrs. Mine has an Aromamizer V1 on it nd the Mrs. has a Fogger 4.1.
Here they are open and side by side. The battery is a 1300mah Nanotech and the 510 is an FDV V3 (a PITA to work with using 14 gauge wire).
And, for those interested, here's a closer shot of the innards -
In the interest of simplicity I made some compromises with assembly. The board sled is glued in using LokTite gel instant adhesive. The battery is secured with Velcro, two one inch square pads. I was going to do metal retainers but that would have taken a lot of time. The cases are from Drip3D.
Here they are open and side by side. The battery is a 1300mah Nanotech and the 510 is an FDV V3 (a PITA to work with using 14 gauge wire).
And, for those interested, here's a closer shot of the innards -
In the interest of simplicity I made some compromises with assembly. The board sled is glued in using LokTite gel instant adhesive. The battery is secured with Velcro, two one inch square pads. I was going to do metal retainers but that would have taken a lot of time. The cases are from Drip3D.
Any one have any info on this? $22.70 Eamon Styled RTA Rebuildable Tank Atomizer - 304 stainless steel + glass at FastTech - Worldwide Free Shipping
I can't find any thing, no videos, no nothing!
It looks interesting
Today my Sky Line RTA came from Copper Vapes
The build quality looks all right good threading, nice fit & Finnish
I have the largest Air Disk in it & the Air flow is good Better than the K-F V5, the Square X Dream & the Hussar. It has a nice direct lung hit draw, like the Hurricane V2.
It has 10 Air disk options,I choose the biggest one to try first
Flavour seems to be on par with all the expensive RTA clones,mentioned above
The deck posts are a bit close together, but I was able to get an 8 wrap spaced 2.5mm Ti round wire coil in there. It seems to be wicking really nice
My first impressions are Good! I'l use it for a few days & see if I can find any flaws.
I can't find any thing, no videos, no nothing!
It looks interesting
Today my Sky Line RTA came from Copper Vapes
The build quality looks all right
good threading, nice fit & Finnish I have the largest Air Disk in it & the Air flow is good
Better than the K-F V5, the Square X Dream & the Hussar. It has a nice direct lung hit draw, like the Hurricane V2.It has 10 Air disk options,I choose the biggest one to try first
Flavour seems to be on par with all the expensive RTA clones,mentioned above
The deck posts are a bit close together, but I was able to get an 8 wrap spaced 2.5mm Ti round wire coil in there. It seems to be wicking really nice
My first impressions are Good!
I'l use it for a few days & see if I can find any flaws.
Any one have any info on this? $22.70 Eamon Styled RTA Rebuildable Tank Atomizer - 304 stainless steel + glass at FastTech - Worldwide Free Shipping
I can't find any thing, no videos, no nothing!
It looks interesting
Always glad to feed the need..
Does anybody know anything about this new RTA?: FastTech Forums
Similar threads
- Locked
