Fasttech Veterans
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
Never heard of them, but the cleito on that page is dearer than 3FVape ($21.99)
Yes,they are not the cheapest.
But someone said it is a good alternative to putting up with GB China.I think it was Mikevapes in one of his reviews.
On the Yihi based mods which take a single tcr - where does one find that single value? Is it one number on steam engine ..... the csv? I have the boxer back and the evic so I'd like to enter some ss values and report back
I found some here on ECF - look at the thread about Nickel Purity, these are what I have so far:
Titanium has a coefficient of 0.0035, just over half compared to Nickel's of 0.006. - -90 °F on DNA40 mods
Stainless Steel has a coefficient of 0.00094, less than one-sixth of Nickel's.
Dicodes' Resistherm NiFe30 has a coefficient is 0.0032, very similar to Titanium.
EDIT: and NiFe30 from StealthVapes is 0.005
That's unusual for them - there's been a couple of additions to the home page with new items in recent days, so I don't think there's an extended holiday.
This is their address & phone number:
Chefs Vapour LTD
12 Stadium Close
Cardiff
United Kingdom
02921 28 0344
SC Squonker up and running, tried dual coil build but it came out too low again, so pulled a coil to get 0.08 single coil according to mod (0.12 before wicking on Tab 521) set to 50w 450F and it works a treat, will have to try using some thinner wire than 28g, problem is with nickel the thinner stuff tends to break when screwed down
@h00ligan knowing you were asking about a good squonker, the one I received today is the best I have had see: Promotion! Steam Crave Squonk MOD Bundle Sale,Steam Crave Squonker
any1 here ever try the Valkyrie clones on FT? Do they stock the EHpro version? (u dont have to look) I've had a chance to spend some time with one, and, i must-say, it's become a favorite mod of mine. Idk if anyone here continues to have interest in mechanical tube-mods, but i can PROMISE ya'll this - The Valkyrie is a top-notch mod + RDA combo.... Hits HARD, button is perfect throw & very smooth, locking mechanism is perfection & doesn't seem to be susceptible to the dreaded STUCK-locking-ring syndrome, and it's over-all just a fantastic little dripper hybrid. I love it. IDK the volt-drop but it seems minimal compared with other mods of differing qualities. It's a fantastic vape for the price - $15 bucks? Forget it! You cant BEAT that price for both a mod AND a great RDA! (despite being irremovable)
I highly suggest a grab, from friend-to-friend. Tis' a quality device, my friends.
May ye all continue Fastteching well into ye futures. Good vapes, and, goodnight!
I highly suggest a grab, from friend-to-friend. Tis' a quality device, my friends.
May ye all continue Fastteching well into ye futures. Good vapes, and, goodnight!
This has to be the most interesting product page I've seen in a while. Heh
Cad drawing. Limited production run but not really a boutique? The list of fixes is quite fun.
It's he right price I guess I should jump on it. Can you post a pic for me of the actual unit maybe with something common for size comparison ?
I appreciate it - I was just considering buying a squonk setup Today - inoy setup. Seller was candid that it wasn't all that great but was a good starter.
Their last discount code ended December 31st so I doubt they will have another just yet.
Have had a nightmare evening with Nickel trying to do a dual coil in the Aromamizer RDA that is high enough for my mod 0.1
32g keeps snapping, so does 30g. With 29g & 28g although I can get it to read 0.1 on my TAB 521 as soon as I wick it up and put it on the mod it registers 0.08 for the first couple of vapes and then goes below 0.08 when mod won't fire, it's driving me nuts - I've ended up after a couple of hours, doing a dual kanthal at 0.19 which works fine, just got to keep an eye on the cotton not drying out & burning - bl**dy Nickel wire resistance.
32g keeps snapping, so does 30g. With 29g & 28g although I can get it to read 0.1 on my TAB 521 as soon as I wick it up and put it on the mod it registers 0.08 for the first couple of vapes and then goes below 0.08 when mod won't fire, it's driving me nuts - I've ended up after a couple of hours, doing a dual kanthal at 0.19 which works fine, just got to keep an eye on the cotton not drying out & burning - bl**dy Nickel wire resistance.
Sorry only just came back on here, it's roughly the same size as the Hotcig DX200 or Smok 75w VTC Mini, can't upload a piccy right now of it next to the Hotcig as I have my Wifi set to go off at 01:00 and the smartphone won't upload over 3G when I'm in the house but if you still need one I can do it in the morning.
EDIT it's only limited at the reduced price, I bought my first one at full price, I have now ordered a second one at the half price
2nd EDIT Well the phone did upload it okay so here it is next to the Hotcig:
Last edited:
I already make my own juice and buy individual flavours but now I want to try the ones like T Juice has 'Forest Affair - A marriage of over ten different flavours which come together to make a very complex fruit vape.
The basic ingredients include; vanilla, blackberry, blueberry, raspberry, Sloe and a sprinkling of spice'.
I already make my own juice using individual flavour concentrates but now I want to try ones like T Juice.
Does anyone know any other websites/brands which sell concentrates like T Juice?..
I've already looked on Chef Vapour and Vapable.
The basic ingredients include; vanilla, blackberry, blueberry, raspberry, Sloe and a sprinkling of spice'.
I already make my own juice using individual flavour concentrates but now I want to try ones like T Juice.
Does anyone know any other websites/brands which sell concentrates like T Juice?..
I've already looked on Chef Vapour and Vapable.
That's ok I found a picture in a thread here. Looks like there were a fair few issues with the box.
Do you think I could use this as a flavor atomizer or is it really just a cloud chucker? I am
Reviewing a thread here now.
Thanks bob. Saw the picture.
Do you think I could use this as a flavor atomizer or is it really just a cloud chucker? I am
Reviewing a thread here now.
Thanks bob. Saw the picture.
Last edited:
You know what @Bobw1951 . I trust you. You know how I vape isn't like how you vape and also what I'm generally looking for. It's not too expensive so let's give it a shot. It's unlikely I would take a squonk setup Out with me die to size and potential Leaking. So For home this looks good
There's just one question
It doesn't look like I can use a smaller drip
Tip. I'm fine with blocking one air hole
Or Allowing it to be open in a sucks
Coil build but the massive drip Tip just won't work for Mouth to lung
Does a regular tip Fit inside the one that it comes with? And this is the atomizer v2 right ? I just don't lung hit and with something that big I can't see how I could do otherwise.
There's just one question
It doesn't look like I can use a smaller drip
Tip. I'm fine with blocking one air hole
Or Allowing it to be open in a sucks
Coil build but the massive drip Tip just won't work for Mouth to lung
Does a regular tip Fit inside the one that it comes with? And this is the atomizer v2 right ? I just don't lung hit and with something that big I can't see how I could do otherwise.
Last edited:
You could get it without the atomizer although it does come with a 510 adaptor so you can use narrower drip tips with it to restrict the amount of vapour, I prefer to use the chuff cap for clouds as well as flavour
- Status
Similar threads
