Fasttech Veterans

[Pictor]

@Pictor
These sound/look nice Trish.But i can't find what ratio "Higher VG" actually is,not even on the 5P website.
View attachment 536869

..and of course, Higher VG could mean anything from 60 up, and even 65 can make me wheeze if I don't add something VG to it.
Considering the bad press 5P have had in recent times, they could at least be more open about something that does matter to some people.
That's one thing I'd like to see on every bottle we buy. I got so fed up of chasing suppliers about ratios, I stopped asking - their loss.

Not sure about "corn glucose". I think I'd rather stick with stuff that we've all tested with years of use. I also wonder what effect this would have on atomisers/coils.

Good points. It probably means 'corn syrup'.
Decided perhaps I won't be a guinea pig after all

 

[Bobw1951]

Good points. It probably means 'corn syrup'.
Decided perhaps I won't be a guinea pig after all

 

[Ms.Sue]

This is the reply from FT about my order which contains batteries.......

'We will keep your order as it is if you want to wait for the new shipping service.
As confirmed with related department, the new shipping service is available in about one week.
Sincerely apologize for any inconveniences caused. Thank you for your understanding'.

 

[Ms.Sue]

I made some coils up last weekend (what I mean by 'made some' I screwed them down and wicked them) and can I find them?. Of course not

 

[Bobw1951]

Outstanding FT packages all from CNY except #5:
#2: Left Malmo for UK (16x25Rs & 2xVTC5s included)
#3: Left China for Sweden
#1 & #5: Both packaging so should ship tomorrow or Monday - Just Shipped

 

[terry w]

I made some coils up last weekend (what I mean by 'made some' I screwed them down and wicked them) and can I find them?. Of course not

It sounds like you need a vape box Sue, where you can keep all your bit`s and bobs together Soz Bob

 

[Ms.Sue]

I still can't find my coils
It's not like they are small, I make them up and then leave them on the Subtank mini base.

 

[Ms.Sue]

It sounds like you need a vape box Sue, where you can keep all your bit`s and bobs together Soz Bob

Lol.

I do have a box but for some reason I didn't put them in there lol.

 

[Ms.Sue]

I've just made another 2 coils and this time I will leave them in my box.

 

[Bobw1951]

What is it with companies that produce specialist coils but they end up looking like rubbish: Atom Vapes aka gClapton coils have now brought out another coil this time a gCeramic - oh nice you may think until you see the specs wire used Nichrome & resistance 0.93 ohm - why Nichrome & why so high, don't mind them doing 0.93 or higher, but also do something like 0.5 or lower for the sub-ohmers.

 

[Bobw1951]

Lol.

I do have a box but for some reason I didn't put them in there lol.

View attachment 537012

You need a bigger box that one is looking a bit full, I'd also recommend getting a small box, I use a 75mg aspirin container just for made up coils

 

[Ms.Sue]

You need a bigger box that one is looking a bit full, I'd also recommend getting a small box, I use a 75mg aspirin container just for made up coils

I have 2 boxes but as I couldn't get them both in the photo, I put everything in one box

What do you mean by aspirin box?. the small cardboard box the tablets come in?.

 

[Bobw1951]

I have 2 boxes but as I couldn't get them both in the photo, I put everything in one box

What do you mean by aspirin box?. the small cardboard box the tablets come in?.

No, they come in a round plastic container with a lid that you have to pull the tab all the way round when you first open it, then the lid clicks back on after. They are ideal for pre-made coils (just the coils):

 

[Ms.Sue]

No, they come in a round plastic container with a lid that you have to pull the tab all the way round when you first open it, then the lid clicks back on after. They are ideal for pre-made coils (just the coils):
View attachment 537030

Oh that's what you meant. I was gonna say a thin cardboard box won't protect coils lol.

 

[Ms.Sue]

I got my Coil Master yesterday so for the last half hour I was getting the feel of how to use it so I got a bit of Kanthal wire and just started winding.
Obviously it's not going to use it.

The photo is a little blurry but you can see it kinda looks like a coil lol.

 

[h00ligan]

I've had a provari p3 for a while now and have been unfortunately one in a million who had a software issues that they had to find and fix. Something about my specific hardware. It wasn't s big deal - the memory slots when changed to 1/10 times would reset that slot. Anyway I've sent it in for the second time to have t fixed. I received a call and subsequently a package with my p3 in it. Back to me super fast. And working like a champ. I know their stuff is expensive and low watts. No temp Control. But for s casual switcher from smoking I can absolutely see the value in provari gear. Just have to say. It's probably not for everyone in this thread but a p3 threaded kabuki or nautilus on a provari mod would be a set and forget thing for a new kidder who had the cash.

Anyway. I got to experience something new when I received my parcel today. It had this also (couple quick snaps)

I have to say it's a lot nicer than I expected. And pretty light. Also the thin screws aren't as annoying as I'd been led to believe. Though I'd have preferred s magnetic door. With their spring closure it wouldn't work. Maybe they'll create a tfv4 lid like battery door. It's a bit tough to push it al back in but it's not exactly super difficult.

Anyway. One thing I've found lately is vape density matters a lot to me. So getting off temp control is a plus. Temp control just doesn't create the same vape. It can be voluminous without being dense or silky. So I've switched back to regular builds in most things and I have to say I love the boost function provape has. I prefer it to the yihi and a few other profile options.

Anyway. Just s few thoughts.

Also. Yaeliq no longer provide caps inside the tops now. Everything has to be childproof so you get a cap
On an open bottle. I was unaware they sold easy pour tops separately but heads up for anyone who orders from them

Also mothers milkshake is absolutely terrible. The claim it's like fresh strawberries and cream couldn't be farther off. It tastes like strawberry bubblegum. Terrible terrible terrible.

 

[Bobw1951]

I've had a provari p3 for a while now and have been unfortunately one in a million who had a software issues that they had to find and fix. Something about my specific hardware. It wasn't s big deal - the memory slots when changed to 1/10 times would reset that slot. Anyway I've sent it in for the second time to have t fixed. I received a call and subsequently a package with my p3 in it. Back to me super fast. And working like a champ. I know their stuff is expensive and low watts. No temp Control. But for s casual switcher from smoking I can absolutely see the value in provari gear. Just have to say. It's probably not for everyone in this thread but a p3 threaded kabuki or nautilus on a provari mod would be a set and forget thing for a new kidder who had the cash.

Anyway. I got to experience something new when I received my parcel today. It had this also (couple quick snaps)

I have to say it's a lot nicer than I expected. And pretty light. Also the thin screws aren't as annoying as I'd been led to believe. Though I'd have preferred s magnetic door. With their spring closure it wouldn't work. Maybe they'll create a tfv4 lid like battery door. It's a bit tough to push it al back in but it's not exactly super difficult.

Anyway. One thing I've found lately is vape density matters a lot to me. So getting off temp control is a plus. Temp control just doesn't create the same vape. It can be voluminous without being dense or silky. So I've switched back to regular builds in most things and I have to say I love the boost function provape has. I prefer it to the yihi and a few other profile options.

Anyway. Just s few thoughts.

Also. Yaeliq no longer provide caps inside the tops now. Everything has to be childproof so you get a cap
On an open bottle. I was unaware they sold easy pour tops separately but heads up for anyone who orders from them

Also mothers milkshake is absolutely terrible. The claim it's like fresh strawberries and cream couldn't be farther off. It tastes like strawberry bubblegum. Terrible terrible terrible.

I still use my 2 P3s (1 is a Beta) and I have Infinite KF4s on top of them, the one on the Beta has a P3 connector, their new one looks nice but I wouldn't buy one

 

[Pictor]

Got a mailshot from Aspire today - looks like a new tank on these kits (to pre-order). The K3 one is 2.0ml and comes with 1.8ohm coils:

I'd be more interested in the tanks than the whole set (prefer the Kanger iPOW with status window for this type).
Looks a neatly made tank - hope they're available separately soon. I like simple set-ups

 

[Ms.Sue]

How do you stop wire unraveling on the spools?.

 

[Bobw1951]

How do you stop wire unraveling on the spools?.

elastic band - the type used and discarded by posties