Fasttech Veterans

[Pictor]

Good evening , and how is the beautiful Trish tonight ?

She's nae sae bad ...nothing special, but still standing

Go HERE Marcus, and either the RY ....., or Steamgunks RY are both excellent !

Yeah the chefs ry ..... is great although I didn't get a lot of tobacconess from it. It's very caramelly. Must admit it was a while ago now that I tried it.

I`ve still got 30 ml of the Gwary4 to try yet, got it from MBV quite a while ago now, so should be very well steeped.

I liked the Heathers Heavenly tobacco too - not a lot of tobacco, but very much an RY type. The Heavenly Army is the same, but being a NET has more tobacco notes in it.

I'm first on the list for one of those then Mind you, knowing Terry, it would be shaped like a motorbike or the leaning tower of Piza

They seem to be perfecting them - one day they'll sit in our homes like our computers do!

It's just the lighting Trisha, their pink really

Shurrup! .....no they aint!

Follow up on the eLeaf GS 16 Plus here is the answer I received via AAEC:
So it seems the GS 16 Plus is another name for the GS Air

Looked that way ....I seemed to see those mainly on EU sites too.

 

[trouble1000]

I`m confused .com I`m sure trish will find what she want`s though, i was just trying to help On you Zero bob, how do you adjust the wattage ? i was looking at the sx 300 before, with the gravity sensor, and all i can see is the firing button, Does it adjust itself ( Gravity Sensor ) ??

You drop it on the floor the watts go down, throw it up in the air the watts go up. Hope that helps

 

[classwife]

You drop it on the floor the watts go down, throw it up in the air the watts go up. Hope that helps

bwahahahaaaa !!!!

 

[Pictor]

You drop it on the floor the watts go down, throw it up in the air the watts go up. Hope that helps

Class! you're on form Ian!

 

[trouble1000]

They seem to be perfecting them - one day they'll sit in our homes like our computers do!

I see they've got the 3D pens now. I agree, once prices come down, we'll all have one at home.

Shurrup! View attachment 404758 .....no they aint!

 

[trouble1000]

Class! you're on form Ian!

I've had a good day today. My humour always improves when I've had a good day

Went to Pizza Hut after the film, which made the day even better

 

[terry w]

Like I said, nowt wrong with that

How's your Lemo performing now, still running ok mate ??

Yes, they are all running great now ! I have found, for me anyway, they perform best with the wick tails tucked into the chimney, with the tail ends either side of the juice channels. Or the other way i have been doing them is by juicing the wick up, trim them, squeeze the tails flat, then cut a V out so when stuck to the block there is no obstruction to the channels. Oh and no smaller than 3mm dia, lowish resistance highish watts.

 

[trouble1000]

Yes, they are all running great now ! I have found, for me anyway, they perform best with the wick tails tucked into the chimney, with the tail ends either side of the juice channels. Or the other way i have been doing them is by juicing the wick up, trim them, squeeze the tails flat, then cut a V out so when stuck to the block there is no obstruction to the channels. Oh and no smaller than 3mm dia, lowish resistance highish watts.

I've been doing them more like option 2 mate, with the V cut. Have you tried a bigger coil than 3mm then mate ??

 

[Bobw1951]

I`m confused .com I`m sure trish will find what she want`s though, i was just trying to help On you Zero bob, how do you adjust the wattage ? i was looking at the sx 300 before, with the gravity sensor, and all i can see is the firing button, Does it adjust itself ( Gravity Sensor ) ??

3 presses to enter the menu, then 1 press to go to next entry in menu, so if you want to change the wattage, you start with 3 presses, then tilt it to the right to go in to adjust mode, then either tilt left or right to adjust + or - , with the Zero there is only 1 memory for the wattage, but in other YiHi SX series mods there is 5 memory slots to store 5 different settings say 5w, 10w 20w 30w & 40w or whatever you want, so at the first menu item to change wattage you can also tilt to left to scroll through the Memory slots instead of tilt to right to adjust

EDIT: Correction 3 presses locks/unlocks it, it is 5 presses to go to the Menu.

 

[Pictor]

Well I wasn't going to say anything, but now you have, if you look on the site, the first couple of pictures it definitely looks like Fuschia the same as the iStick

No, they aren't!

A bit off topic bob, but them GS air tanks ! did you and trish know thet FT sell `em ? I have seen them paired with the i sticks in kits, so surely they will have the tanks separately.

I've looked for 'GS' on there a few times but there's nothing like the GS16 ...I'll wait

I was just joking Bob, don't even know what colour they are, I hadn't checked Looks like my joke has backfired on me

Nah! They have pink ones, they have purple ones ...they have RED ones! ..

I`m confused .com I`m sure trish will find what she want`s though, i was just trying to help

They're new, so not many places have them yet -they do have them at VapeRus, but no coils yet! They were showing just the Air coils two days ago, and I did ask about the right ones, but they haven't replied. At least they appear to have them on order now.

I see they've got the 3D pens now. I agree, once prices come down, we'll all have one at home.

...wonder what we'll print with them" ...new eggcups, beakers, mod stands ...it'll probably cost more for the materials to print things with!

Aye, very funny!

I've had a good day today. My humour always improves when I've had a good day

Went to Pizza Hut after the film, which made the day even better

Oh nice ..a pizza would suit me fine too!

 

[terry w]

I've been doing them more like option 2 mate, with the V cut. Have you tried a bigger coil than 3mm then mate ??

Yes i have done just the one at 3.5, and really filled the chamber with rayon, again making sure the channels are clear. doing it that way i find the vape a lot more juicier, and dense. Also the wicks seem to stay fully saturated done that way.

 

[trouble1000]

3 presses to enter the menu, then 1 press to go to next entry in menu, so if you want to change the wattage, you start with 3 presses, then tilt it to the right to go in to adjust mode, then either tilt left or right to adjust + or - , with the Zero there is only 1 memory for the wattage, but in other YiHi SX series mods there is 5 memory slots to store 5 different settings say 5w, 10w 20w 30w & 40w or whatever you want, so at the first menu item to change wattage you can also tilt to left to scroll through the Memory slots instead of tilt to right to adjust

I think my way is easier Bob

 

[terry w]

3 presses to enter the menu, then 1 press to go to next entry in menu, so if you want to change the wattage, you start with 3 presses, then tilt it to the right to go in to adjust mode, then either tilt left or right to adjust + or - , with the Zero there is only 1 memory for the wattage, but in other YiHi SX series mods there is 5 memory slots to store 5 different settings say 5w, 10w 20w 30w & 40w or whatever you want, so at the first menu item to change wattage you can also tilt to left to scroll through the Memory slots instead of tilt to right to adjust

Right So there is only one button then I thought i was missing something !

 

[trouble1000]

Yes i have done just the one at 3.5, and really filled the chamber with rayon, again making sure the channels are clear. doing it that way i find the vape a lot more juicier, and dense. Also the wicks seem to stay fully saturated done that way.

Mmmm, interesting that mate. I've been doing a lot more 3mm than 2mm coils because of that very reason. Might have to dig out a 3.5 or 4mm bit, see what happens. Mind you, these parallel coils are still out performing standard coils so far

 

[terry w]

I think my way is easier Bob

Totally Agree

 

[trouble1000]

Nah! They have pink ones, they have purple ones ...they have RED ones! ..

What about magenta though, I want a magenta one

...wonder what we'll print with them" ...new eggcups, beakers, mod stands ...it'll probably cost more for the materials to print things with!

Probably will be expensive for the resins you're right. Bit like the way some standard printers charge more for their genuine inks than they do for the original cost of the printer.

Oh nice ..a pizza would suit me fine too!

Had a pizza, wedges, chicken wings and cheese triangle type things (not dairylea ). Was yummy.

 

[Bobw1951]

I think my way is easier Bob

Right So there is only one button then I thought i was missing something !

I put in an edit, 3 presses locks/unlocks, it's 5 presses for the Menu

 

[terry w]

Mmmm, interesting that mate. I've been doing a lot more 3mm than 2mm coils because of that very reason. Might have to dig out a 3.5 or 4mm bit, see what happens. Mind you, these parallel coils are still out performing standard coils so far

I read on the US Lemo thread that the stock coil is 4 ml Ian, I did notice how bloody big they are , and they also seem to have a lot of cotton in the stock as well, so replicating that sort of set up seems to work best.

Next on my to try list is a parallel mate

 

[Bobw1951]

No, they aren't!

I suppose we will have to wait until you get it now

I've looked for 'GS' on there a few times but there's nothing like the GS16 ...I'll wait

No he's talking about the GS Air here : $8.65 Authentic Eleaf GS Air Bottom Coil Clearomizer - 2.5ml / 1.5ohm / silver + translucent at FastTech - Worldwide Free Shipping

 

[terry w]

I suppose we will have to wait until you get it now



No he's talking about the GS Air here : $8.65 Authentic Eleaf GS Air Bottom Coil Clearomizer - 2.5ml / 1.5ohm / silver + translucent at FastTech - Worldwide Free Shipping

Could be one for george that as well 16.5 mm width