• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Fasttech Veterans

Status
Not open for further replies.

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Okay, so i emptied and cleaned Vinnies Lemo to be shipped this week :) And i filled one of my subtanks with Mrs lords victoria sponge, 12 mg, left it to sit, after priming the coil for 5-10 minutes, stock coil .5 ohms. Put it on the VF and set it at 17.5 watts. First toot on one air hole, hardly any vapour.

So i upped the watts to 25, and set it on 2 airholes, much better vapour, and flavour, but a very hot vape with the .5 coil. So i swapped that out, and put the 1.2 coil in. Then i fully opened the air flow, set it at 14 watts, and it is absolutely perfect :toast: Really full of flavour, with massive, or as bob would say Mahoosive vapour production.

Very Very pleased with these tanks, for there performance and easy maintenance :) I don`t think i will be using the .5 coils much though, way to hot a vape for the liquids i use.:laugh:
 

dw117

Super Member
ECF Veteran
Jul 10, 2014
857
1,324
Kernow
Okay, so i emptied and cleaned Vinnies Lemo to be shipped this week :) And i filled one of my subtanks with Mrs lords victoria sponge, 12 mg, left it to sit, after priming the coil for 5-10 minutes, stock coil .5 ohms. Put it on the VF and set it at 17.5 watts. First toot on one air hole, hardly any vapour.

So i upped the watts to 25, and set it on 2 airholes, much better vapour, and flavour, but a very hot vape with the .5 coil. So i swapped that out, and put the 1.2 coil in. Then i fully opened the air flow, set it at 14 watts, and it is absolutely perfect :toast: Really full of flavour, with massive, or as bob would say Mahoosive vapour production.

Very Very pleased with these tanks, for there performance and easy maintenance :) I don`t think i will be using the .5 coils much though, way to hot a vape for the liquids i use.:laugh:

Any news on when I can be having that black lemo drop mate? No rush just making sure you haven't forgotten is all.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Any news on when I can be having that black lemo drop mate? No rush just making sure you haven't forgotten is all.

This week if you want Adam, i`ll get my other ST set up tomorrow, and get the Lemo ready for you :) Just pm me your Address, and i will give you my Paypal Address !
 

dw117

Super Member
ECF Veteran
Jul 10, 2014
857
1,324
Kernow
This week if you want Adam, i`ll get my other ST set up tomorrow, and get the Lemo ready for you :) Just pm me your Address, and i will give you my Paypal Address !
Sure I've PM 'ed you.

I've been having "check atomiser" messages with my subtank rba section yesterday so I need to take it apart tomorrow and have a look what's going on. Will probably do some liquid mixing as well. Sunday is the best day for vape stuff.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Sure I've PM 'ed you.

I've been having "check atomiser" messages with my subtank rba section yesterday so I need to take it apart tomorrow and have a look what's going on. Will probably do some liquid mixing as well. Sunday is the best day for vape stuff.

What sort of build did you do Adam ? I will probably try one with Rayon tomorrow, with 28 ga, just to see how it peforms.
 

dw117

Super Member
ECF Veteran
Jul 10, 2014
857
1,324
Kernow
What sort of build did you do Adam ? I will probably try one with Rayon tomorrow, with 28 ga, just to see how it peforms.
It was 25ga kanthal, about 6 spaced out wraps 3mm I think. About 0.7 or 0.8 ohms. Worked better with rayon but that might just have been because I put too much ... cotton in the first wick I did.

Used it at 20-25w mostly but it could handle 30w I think.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
It was 25ga kanthal, about 6 spaced out wraps 3mm I think. About 0.7 or 0.8 ohms. Worked better with rayon but that might just have been because I put too much ... cotton in the first wick I did.

Used it at 20-25w mostly but it could handle 30w I think.

I think i need to lower my nic :laugh:
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
I use 3mg now and going to start mixing new ones at 2mg I think.

Yes, i think i will start replacing my 12 mg to 6, as and when. Even 12 seems a bit harsh on my throat these days, and i reckon to get the full benefits of low ohms, the lower the nic the better. Though i can`t see myself going lower than 6 :laugh:
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread