• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Fasttech Veterans

Status
Not open for further replies.

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
@Bobw1951
Have you got a iSub apex tank.If you have what's your opinion
I have 2, they are a very good tank, top filling and the AFC is also near the top instead of the bottom, which means no leaking when upright unlike a lot of other tanks, for that reason I have one in my DNA40 Railbox.

Downsides are only Kanthal coils so no TC, also hard to see when tank is running low, because due to the Top AFC there are 2 tanks, the glass one which the juice goes into, surrounded by a steel one with plastic windows and it clouds up (condensation?), the air goes in and down between the 2 tanks to the bottom then up the coil.
 
  • Like
Reactions: Marcus1970

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
I'm starting to think postal workers know what chefs is and are "losing" packages to their own house. I've had about 50% failure rate receiving packages from chefs. Fortunately they've replaced he knew that went missing but in worried I'm going to start looking bad to them. That they will think I'm pulling a con :( i made my last order November 26th and it hasn't arrived yet. In contrast I ordered on the 27th from Eco and t arrived yesterday.

I just don't understand why the parcels from Chefs can't seem to make it half the time but Eco vape sent me a liter (literally) of juice that arrived without molestation in around 7 business days. I've ordered more from Eco and not had anything miss. It must be theft and brand recognition. Chefs are better known than Eco there right?

Bob what was the inexpensive squonking if you were raving about ?

I received the aspire odyssey setup today

The Pegasus mini mod is the smallest I think you can get for swappable 18650 and temp
Control. It weighs like 66 grams without battery or less. I'll double check. The triton mini tank is interesting so far. Not sure if I prefer t to the kabuki. Flavor is good. Capacity is tiny.

The complete setup is very nice. Especially for the price.

Airflow is enough for direct lung inhale. High those preferring that style of vaping are probably better served with the full size triton

Pegasus mod is 22 mm the tank is 20-21

What you can't get is how much less it weighs. It's the weight of an istick with battery Installed. The evic mini is light. This is much lighter.its lighter than the istick 40tc

That to me is incredible.


Interesting battery latch. Magnetic bottom door and an arm you or over the bottom of the battery like a record player.

d98c2633d43d2f4d6ee560b8c5e3a5dc.jpg


Regarding the evic mini. The wire finish has to be one of the most durable finishes I've ever seen on a mod. Not a mark on t and I've not been careful. It's like a great automotive pint job. The legislation mod is touted to have a special finishing process by it doesn't feel as durable as the evic mini.

Here it is compared to istick and evic mini with kabuki and mark bugs gem respectively. The super light weight makes it feel much smaller in pocket than the others. Feels like an empty shell with nothing in it. When the battery is Installed. Not just light it's not dense at all. I love it. The menu system and new coil detection is really interesting. It lacks stainless steel unfortunately and is not user upgradable later.

81aa6be88a714e62535cba64b701f899.jpg
 
Last edited:

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
Kangxin Inoy I bought it from Focalecig.
Is that what you'd suggest for a first squonk experience? I'm
Considering picking up a chalice 3 atomizer to go on top of something. I've been led to believe squonking is a bit as good as it gets for flavor as its really just dripping wih convenience. And he chalice 3 is meant to be a very good flavor atomizer.

Either that or maybe a Genesis atty of some kind. But squonking really appeals to me so I'm open to recommendations. Less expensive to start and see if I like it.

Does the inoy support titanium? I see it in fasttechs site for $42. It's a bigun but k doubt I'd take a squonk box out with me just due to potential leaking (unless that isn't an issue)

Thanks for your help I really appreciate it.
 
Last edited:

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
Is that what you'd suggest for a first squonk experience? I'm
Considering picking up a chalice 3 atomizer to go on top of something. I've been led to believe squonking is a bit as good as it gets for flavor as its really just dripping wih convenience. And he chalice 3 is meant to be a very good flavor atomizer.

Either that or maybe a Genesis atty of some kind. But squonking really appeals to me so I'm open to recommendations. Less expensive to start and see if I like it.

Does the inoy support titanium? I see it in fasttechs site for $42. It's a bigun but k doubt I'd take a squonk box out with me just due to potential leaking (unless that isn't an issue)

Thanks for your help I really appreciate it.
here are 2 main sizes of atty for squonkers, 14mm & 22mm, because when Reo started doing squonkers they made the one that took a carto, some mods have a normal style 510 which can take both like the Inoy or Terminator (a mech one that FT might have), others can only take the smaller atty, like the RM2 from Reo Mods, or the Chalice III because they have a catch cup type 510.

Inoy has only 2 setting for TC on/off similar to DNA40 so if you wanted to use Ti, you would have to reduce the Temp to about 360°F and watts to 30w - there was a slight problem with the Inoy which I don't know if they have fixed since I got mine in that it would not remember the Power and every time it went to sleep it would go back to 60w, which is okay in Temp Mode with Ni, but could be a pain in normal mode or with Ti.

Another good starter is the mech one that is made over there by Vapage - not sure if that will take an atty though, might only be cartos
 
  • Like
Reactions: h00ligan

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
Just put one of the new Clapton coils.the SSOCC ones in a V1 Subby and it fits.Its very tight but it does go in.It looks like the hole in the top of the coil that fits to the chimney maybe a tad smaller,than the original square coils

What's it reading like mate,anymore accurate than the VOCC Ni 200's?
 
Status
Not open for further replies.

Users who are viewing this thread