• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Fasttech Veterans

Status
Not open for further replies.

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
Oops I should of said coil building for subtank mini and nano.

The only problem you may have with the pre-built coils you've choosen Ms.Sue is for the Kanger rba the legs need to face in opposite directions.
But you can easily rectify that,but will + or - your resistance.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
No it doesn`t Sue, you can use any coil/wire you wish. But as george says, with the pre-made ones you will have to turn one of the legs so they go in the opposite direction. So if you take half a wrap off it will lower the ohms slightly, and vice versa. :)
 

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
That's something I didn't know.Can you buy pre made coils with legs in the opposite direction.

Yes mate,Kanger make them (and probably other manufacturers.)
Kanger do them in 20 packs.
I-vapour elixir stock them in the UK

5c96af53.jpg
 

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
Have you shopped with I-vapour elixir before?. If you have, do they give good service?.

No i haven't used them before.But Bob has,and i don't think he's had any problems,he'll tell you later,when he's shaken off his hangover :w00t:
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
No i haven't used them before.But Bob has,and i don't think he's had any problems,he'll tell you later,when he's shaken off his hangover :w00t:
What hangover - I don't drink as much as i used to when younger, all I had last night was 2 bottles of Old Mout.

Anyway to answer @Ms.Sue iVapour and iVapour-elixir both the same company and I have had no problems with them, and to answer your query about the RBA 0.5 ohm is the minimum resistance which means you can use the 1 ohm coils as well just that you shouldn't go below 0.5, so for those 0.5 coils you have ordered make sure you turn the coil by adding a half turn, with the 1ohm coils you can undo/add half a turn, of course you will have to make sure that the mod can handle >1ohm if you undo the coil.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
:D
Don't think any of us do Bob.
I haven't been out for a beer for months.And it doesn't worry me.
I've still got 2 bottles of my favourite Belgian beer "Palm" in the cupboard and a litre of Leffe Royale that my mate brought over last year untouched, really must get round to trying that.
 
  • Like
Reactions: Brynglas

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
I've still got 2 bottles of my favourite Belgian beer "Palm" in the cupboard and a litre of Leffe Royale that my mate brought over last year untouched, really must get round to trying that.
I've still got 5 bottles of my favourite Black Stump shiraz, and haven't been able to drink any for months! (I only ever used to drink one glass perhaps 1-2 times each month on average though - interferes with work if I fall off my perch!)
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
I've still got 5 bottles of my favourite Black Stump shiraz, and haven't been able to drink any for months! (I only ever used to drink one glass perhaps 1-2 times each month on average though - interferes with work if I fall off my perch!)
 

Ms.Sue

Ultra Member
Aug 10, 2015
2,176
5,754
UK
What hangover - I don't drink as much as i used to when younger, all I had last night was 2 bottles of Old Mout.

Anyway to answer @Ms.Sue iVapour and iVapour-elixir both the same company and I have had no problems with them, and to answer your query about the RBA 0.5 ohm is the minimum resistance which means you can use the 1 ohm coils as well just that you shouldn't go below 0.5, so for those 0.5 coils you have ordered make sure you turn the coil by adding a half turn, with the 1ohm coils you can undo/add half a turn, of course you will have to make sure that the mod can handle >1ohm if you undo the coil.

Bob you are a star. Thank you so much for explaining :)

I'm using a SUBOX Mini with SUBTANK Mini and Nano.

When I get my delivery from FT I'll just play around with the pre coiled wires and test them on the ohm meter reader resistance tester until I'm more confident to use them.
 
  • Like
Reactions: Bobw1951
Status
Not open for further replies.

Users who are viewing this thread