It'll be one that will go onto my list - quite nice indeed, not too sharp a taste
Fasttech Veterans
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
I haven't tried Looper, but might do next time I order something from CV, and yes, the cCell coils fit Aspire Atlantis 1 & 2, Triton 1 & 2, eLeaf iJust & Melo 1 & 2, BV Silo Beast...and anything else that can take Atlantis style coils - don't know why everyone doesn't just go over to them, save having to buy hordes of different ones
The steam tuner part allows for getting rid of the spring. It replaces the little nut that sits inside the white Delrin ring with a cap. You can either then use the spring or no Spring wih it. Without a spring if the juice channel is open it won't register and when you close it you have direct metal contact.
Unfortunately it still doesn't work properly.
Imo The biggest problem
We face with temp
Control is the 510 adaptor. A tiny center pin typically made out of at best mediocre material. If we are going for s high level
If accuracy we need a lot of res smoking of the resistance changes. To do that we really need a better standard. Something like the p3 connection or Similar. I'm shocked a sort of open standard for connection hasn't been created yet. Any of these companies doing temp
Control could do it. - Evolv Yihi Etc. they should find a reliable way to get the sample data and release specs so their chips work better. The dna200 for me was a disaster. It's great to have a venue high sample rate until 85% of atomizers can't send reliable data under heat and current at those rates over a tiny piece of mediocre quality metal.
Honestly I feel
If we had more reliable resistance transmission / reading existing methods would work well
For temp Control.
I wanted to share with you all _about my boxer and gingervaper.com experience
You may not remember I'd bought a dual 18650 boxer mod. Which I assembled myself a bit ago. It went together easily enough but one soldier was tough for me wih the arm problems I had.
Anyway the boxer one day when having its button pressed stopped working. I was upset because by assembling it myself I had foregone any real support (and saved $25 as well as gaining experience assembling). I contacted Ginger vaper who do the boxer mod and right away they told me to send it in so they could see and advise. When thy learned kf my trouble and that I couldn't drive they arranged a pick up from My house. I sent it in a couple days before Christmas and today received back the boxer wih a new chip and the connections redone to their much higher standards - a few samples of juice. And no bill for the repair.
While it's easy to assume the chip had an issue so they replaced it the bottom line is a great many companies would have just told me there was at least a few to replace the chip. They knew I couldn't do the job right now. Also many companies would have just said the install was the issue - which it may well have been. They didn't.
They really stood by their product and me as a customer in a way not too many companies do. They worked around a difficult time for me and dis absolutely everything they could to help me.
So not only can I say the boxer mod is a wonderful mod but the support I received from ginger is the absolute tip top.
I know you aren't in the USA but if you have a
Occasion for a very light unique mod check them out. The product and the company have really impressed me. They're one of probably 3 companies hat have really stepped up for me lately.
Here's the boxer collection You searched for boxer - Ginger Vaper
The new small single battery unit is on my buy list. It should be very pocketable. The 3D print fabric plastic is very unique. Super durable and ridiculously light. You can't imagine how light this is until you hold it.
Last edited:
We can buy them from esauce here in the UK.As a kit or pre built.
Built to order takes about a week.
Oh I see. Have any of you tried them? They really are incredibly light, durable and ergonomic. Building them is actually very easy - 5 solder points. If it wasn't for my current difficulties my build would have been much cleaner.
The dual 18650 is actually really small for a dual
Mod but the thickness and material don't make it very pocket friendly. It is my favorite mod to use at home though because it's impossible to rip it over on a nightstand and he temp controllers very well. I ergonomics are great too.
They've removed their upcoming small boxer right now it looks like. I believe it takes a 26650 battery but it looks about he size of the istick tc. I believe it's a Yihi v2 chip but I'm not positive. When they put it back up I'll Probably order one
Anyway I just wanted to relay a really positive experience with a vendor and talk about a product ice had a while and really like.
Some of the new chipset features I don't understand yet as I hadn't updated to the v3 boxer software. I haven't used the custom tcr value yet for a stainless build but likely will
Today. Also now there's a temperature compensation setting after zeroing resistance with the atomizer. I'm not user what that's about. It's Celsius only too which is a bit odd if you're set to F in the main temp mode.
You all probably know more about the new software features than I right now. I can say I find the 350j chip much more reliable than the dna200 chip. I get around 10 ml wirrh of battery with dual 18650. Another plus for around the house. Charge every three days or so.
Thought I post a picture of the fast tech drip tip where it actually suits the device
That looks beautiful.
Don't know much about it yet, but it appears that YiHi are bringing out a SX Mini Q class mod using dual 18650 & SX450 chipset and they are claiming it is a 200w mod 
According to Steam-Engine only the LG HB6 and Sony batteries could cope with 200w and wouldn't last long either.
According to Steam-Engine only the LG HB6 and Sony batteries could cope with 200w and wouldn't last long either.
For anyone contemplating an order with Steamcrave there is a promotion with upto 50% discount on their website at the moment.
Now Chase for Flavor! - Steam Crave, Aromamizer, Squonk
Now Chase for Flavor! - Steam Crave, Aromamizer, Squonk
Don't know much about it yet, but it appears that YiHi are bringing out a SX Mini Q class mod using dual 18650 & SX450 chipset and they are claiming it is a 200w mod
There are alot of companies bragging 200w on twin 18650's at the moment
Other than the two batts you mention Bob,isn't 133 the max for 2 x 18650?
I'd have not mentioned it.
That's what most battery experts say, I just looked at the list of Batteries in the Battery drain bit to see what could handle 30A, then input 0.1 ohms and 200w and then looked at the headroom availableThere are alot of companies bragging 200w on twin 18650's at the moment
I know even with fully charged VTC5's my Dual SX goes upto 133w and stops.
The batts were brand new from Ecolux(it could still be the batts i suppose.)
Think YiHi are telling porkies unless it's something to do with the new chipset - don't know why they don't just put a 3S1P LiPo in and be done with it
EDIT: and TBH we don't really need 200w anyway
There is some talk on the FT forum about a new brand of battery FT are stocking.
Not as good as advertised(40a)but tests seem to show good for 25a.
I won't buy.
40a: FastTech Forums
Not as good as advertised(40a)but tests seem to show good for 25a.
I won't buy.
40a: FastTech Forums
Did you watch the video
really mad tester, and the link back to this forum : Tesiyi 40A 2600mAh 18650 Bench Test Results...not 40A/2600mAh but a decent 25A/2300mAh batteryI've put them on my wishlist
Did you watch the videoHeadcase
Last edited:
- Status
Similar threads
