Fasttech Veterans

[Bobw1951]

I have some 50%VG/50%PG MCV, so will need to make some in my usual 100%VG base and mix it ...50% of each do you think Bob?

Sounds about right as that should give you 25/75 overall - I ended up making 100ml of 3mg rather than just the concentrate, as I was down to just under 30ml of the pre-made, it's in the cupboard steeping now.

 

[Pictor]

BUNNY
10% FT discount code for the easter weekend.With double rebate points.
(15% on some non ecig related items).

Wabbits! ...how cute Thanks George.

 

[Pictor]

Sounds about right as that should give you 25/75 overall - I ended up making 100ml of 3mg rather than just the concentrate, as I was down to just under 30ml of the pre-made, it's in the cupboard steeping now.

Thanks Bob. Suppose I'll have to make some to steep too. Will need to dig it out and check what the nicotine strength of the 50/50VG-PG is!

I do know I still have 46.7ml of the 12mg high VG too - will need to work out how much zero I need to make that into .3mg or less.

 

[Bobw1951]

Thanks Bob. Suppose I'll have to make some to steep too. Will need to dig it out and check what the nicotine strength of the 50/50VG-PG is!

I do know I still have 46.7ml of the 12mg high VG too - will need to work out how much zero I need to make that into .3mg or less.

12/3=4 so 1 part 12mg to 3 parts zero

 

[Pictor]

12/3=4 so 1 part 12mg to 3 parts zero

Thanks Bob - I always trust your calculations ...I hate this type of thing (as you know )

So, if I add 140.1ml of zero to the 46.7ml of 12mg, I'll get the right result!

 

[Bobw1951]

Thanks Bob - I always trust your calculations ...I hate this type of thing (as you know )

So, if I add 140.1ml of zero to the 46.7ml of 12mg, I'll get the right result!

 

[Pictor]

I've just caught up on a fews days of FT new stuff - I like the look of this, and assume I can use it in wattage mode rather than TC:
$26.98 Authentic Eleaf iStick Pico 75W TC VW APV Box Mod - 1-75W / 100-315C'(200-600F') / 1*18650 at FastTech - Worldwide Free Shipping

 

[terry w]

I've just caught up on a fews days of FT new stuff - I like the look of this, and assume I can use it in wattage mode rather than TC:
$26.98 Authentic Eleaf iStick Pico 75W TC VW APV Box Mod - 1-75W / 100-315C'(200-600F') / 1*18650 at FastTech - Worldwide Free Shipping

Yep, you sure can Trish

 

[Brynglas]

Bob,will the SC Squonker take a 25mm dripper without any overhang?

 

[Bobw1951]

Bob,will the SC Squonker take a 25mm dripper without any overhang?

Doubt it, although I just tried the smok TFV4 (24.5mm) and that doesn't overhang and there is still a couple of micrometers free

 

[e-pipeman]

I've just caught up on a fews days of FT new stuff - I like the look of this, and assume I can use it in wattage mode rather than TC:
$26.98 Authentic Eleaf iStick Pico 75W TC VW APV Box Mod - 1-75W / 100-315C'(200-600F') / 1*18650 at FastTech - Worldwide Free Shipping

Interesting - but with just 1 18650 perhaps the battery life will be a bit off?

Having said that it looks very dinky and could prove handy when out walking.

I'm seriously considering this now - oh dear.

 

[Bobw1951]

Interesting - but with just 1 18650 perhaps the battery life will be a bit off?

Having said that it looks very dinky and could prove handy when out walking.

I'm seriously considering this now - oh dear.

for someone using full wattage 75W = 8.6v @ 1ohm it would last about 70 5-second puffs
for a tootle puffer at 15w you would get a decent 300+ puffs

 

[Brynglas]

Doubt it, although I just tried the smok TFV4 (24.5mm) and that doesn't overhang and there is still a couple of micrometers free

It seems to,just watched Martyn Parkers,state of the vape.
And he's using the new V-RDA on the SC squonker.Asking, as i ordered a V-RDA and it comes with the squonk pin.

 

[Bobw1951]

It seems to,just watched Martyn Parkers,state of the vape.
And he's using the new V-RDA on the SC squonker.Asking, as i ordered a V-RDA and it comes with the squonk pin.

even if it does overhang it will only be a few micrometers, so hardly noticeable

 

[e-pipeman]

for someone using full wattage 75W = 8.6v @ 1ohm it would last about 70 5-second puffs
for a tootle puffer at 15w you would get a decent 300+ puffs

I tootle puff between 8.5 and 9 watts using a 1.8 ohm coil. I also puff constantly, so 70 puffs would take about 30 mins.

 

[Bobw1951]

I tootle puff between 8.5 and 9 watts using a 1.8 ohm coil. I also puff constantly, so 70 puffs would take about 30 mins.

at those figures using a decent battery like the VTC4 you could get about 550 puffs, and yes 30 minutes was what those 70 puffs equated to

 

[e-pipeman]

According to this: iStick Pico Kit Firmware Upgradeable - iSmoka/Eleaf electronic cigarette
the Melo III mini goes well with the Pico. Can you get 1.8 ohm coils for it, though? Life is hard.

 

[Bobw1951]

According to this: iStick Pico Kit Firmware Upgradeable - iSmoka/Eleaf electronic cigarette
the Melo III mini goes well with the Pico. Can you get 1.8 ohm coils for it, though? Life is hard.

No 0.3 & 0.5 : official eleafworld.com - eleaf,ismoka,ec head,ijust,ijust 2

The GS Air coils do a 1.5ohm so any of their GS Air atties would be okay

 

[Brynglas]

even if it does overhang it will only be a few micrometers, so hardly noticeable

Ah well! We'll soon know

 

[e-pipeman]

No 0.3 & 0.5 : official eleafworld.com - eleaf,ismoka,ec head,ijust,ijust 2

The GS Air coils do a 1.5ohm so any of their GS Air atties would be okay

Yes - use GS Airs a lot. Also Nautilus Mini. I'd like to find a very short clearo that you can get 1.8ohm coils for.