Fatality m25 rta

[RuiG]

I was going to pull the trigger on a second hand one, original and cheaper than the clones but this Covid thing has got this purchase on hold.

I see some used fairly cheap here in Portugal.

Personally I don't really think the looks/design is well balanced but in the end it's the vape quality that matters.

Stay safe.

 

[Marper]

Actually I like the look and it is a fantastic tank, believe me, I love it, I've got over 40 tanks and the m25 comes close to winning them all,nothing can really compare to my mesh profile RDA but this comes very close, for an rta its superb, very versatile with the 2 afcs and it's a pleasure to build on, that's why I just ordered another.

 

[Marper]

After using a few tanks, gone through 30ml juice I think I've found the best position of the coils for me ,I keep the coils close to the deck with a 3mm gap between them, I vape using the afcs open and I'm really happy, but remember, this tank can be any way you want, single,dual, close an afc off ect,the juice port is very wide and makes wicking so easy, I do recommend this tank

 

[RuiG]

After using a few tanks, gone through 30ml juice I think I've found the best position of the coils for me ,I keep the coils close to the deck with a 3mm gap between them, I vape using the afcs open and I'm really happy, but remember, this tank can be any way you want, single,dual, close an afc off ect,the juice port is very wide and makes wicking so easy, I do recommend this tank

Btw, I would use it with my regular build:
Fused clapton ni80 2*.28 + .38, 3 to 3.5mm inner diameter spaced coils. This usually ohms at .36 depending on wraps, provide a mild warm vape and don't require too much power (I use them at max 62watts but that is tops)

 

[Marper]

When my new one arrives next week I'm going to do a single coil flatwire using my 20g ss316 but I'm pairing this tank with my ljoy genie dual 20700 because it will be very low ohm, will post pics,I think it will be 3.5 id as there is a big juice port to fill

 

[Marper]

That would be a good build for the m25

Btw, I would use it with my regular build:
Fused clapton ni80 2*.28 + .38, 3 to 3.5mm inner diameter spaced coils. This usually ohms at .36 depending on wraps, provide a mild warm vape and don't require too much power (I use them at max 62watts but that is tops)

 

[Marper]

I have found the size of the screws, they are m3/3mm, I found some in my vape box, the screws that came with the tank were slot head and I hate them, now fitted with stainless steel hex screws.

 

[Marper]

After playing with my m25 for a few day's I made dual 22g flatwire 6 wrap 3mm Id, I have them more to the centre of the deck and close to the deck.
You have to be careful with the build because if you get it wrong the coils can touch the chimney causing a short.
A little bit more fine tuning needed but for now its really good, closed both afcs to half and flavour is superb.

 

[Marper]

This tank is the ultimate for me,the holy grail, no leaks,easy to build, superb flavour, yeah for me I think it will take something absolutely astounding to beat this tank.
30ml juice I've used since I changed the coils to flatwire and the flavour is still fantastic.

 

[Blitzdonlife]

This tank is the ultimate for me,the holy grail, no leaks,easy to build, superb flavour, yeah for me I think it will take something absolutely astounding to beat this tank.
30ml juice I've used since I changed the coils to flatwire and the flavour is still fantastic.

You're really swaying me to purchase one, I'm at 60%, trying to resist lol.

 

[Marper]

You're really swaying me to purchase one, I'm at 60%, trying to resist lol.

I'll think of some more things to say about it to try to get you to 90%,I'll get another in the post today hopefully and I'm going to try it with a single coil

 

[Marper]

I just re wick'd with rayon instead of cotton after 40ml juice, it didn't really need it but I thought that it might do well with rayon, yeah, it was made for it,just keeps getting better and better

 

[Marper]

My second m25 didn't arrive in the post,the place I ordered it from is only about 12 miles away and ordered it last week, post says they are behind by 4 or 5 days

 

[Marper]

One thing I must say is if you get a black clone you will notice that the 510 thread is also blacked, that caused me some headaches with resistance, I have just figured it out, a good sandpaper of the threads sorted out the problem, I used a very fine gauge wet and dry,could use a fine wire wool to take the coat off

 

[Don29palms]

One thing I must say is if you get a black clone you will notice that the 510 thread is also blacked, that caused me some headaches with resistance, I have just figured it out, a good sandpaper of the threads sorted out the problem, I used a very fine gauge wet and dry,could use a fine wire wool to take the coat off

A wire toothbrush works great for cleaning threads.

 

[Marper]

Thanks but this was thick enamel paint I think, I've just had a look at my other black tank rtas and the coat does not cover the threads, I sort of noticed an issue when I first got it, it's fine now, I do have a few wire brushes for cleaning my coils and use them occasionally on threads, thanks

 

[Marper]

I don't think I'll have the same problem with my new one when it arrives cause I got the ss one

 

[RuiG]

Glad to read your positive experiences with this atomizer.

It's still on my "to buy list"... only used and cheaper.

With all this confusion around the world at this moment I prefer not to spend fortunes in gear and end up losing my job without notice.

Stay safe.

 

[Marper]

I understand, it is a really good tank and I'm sure you would like it.
The resistance reading has stabilized since I made sure of contact, on my meter it shows 0.16 and that's about what I wanted, on most of my regs it shows 0.15/0.19 except for my smoant ranker that seems to have a mind of its own and decides itself what to do, Haha, I still love the mod

 

[Marper]

And thanks got to go to someone in the manta thread for pointing out this tank, yeah its a very hard time, just done 4 weeks indoors except for the very limited time I go out to the corner shop and it has just been extended for 3 weeks, stay safe