Fatdaddy 10a 7.4 switch

[darthvaper13]

I'm looking for a switch that will work with a dual 18650 series box mod will this switch work with the build thanks. This is what it say on the specs

Rated conservatively at 10A/7.2VDC. 0.5mm. Low profile design with a 20mm bezel and 14mm button. 0.5mm cap w/ 16.5mm depth under.


Thanks

 

[drmarble]

You will need to limit yourself to under 74 watts. That is P=V*I.
For a series mod, that would be a 0.74 ohm coil. 7.4/10. Not exactly super high power. I vape at 8 to 12 watts, though.

 

[darthvaper13]

You will need to limit yourself to under 74 watts. That is P=V*I.
For a series mod, that would be a 0.74 ohm coil. 7.4/10. Not exactly super high power. I vape at 8 to 12 watts, though.

Ok what button could be use so I dont need a mosfet

 

[conradr10]

Ok what button could be use so I dont need a mosfet

might I sugguest this: HD Push Button Start Switch 60 amp 27 28 30 31 33 35 37 38 39 41 55 Chevy b | eBay I use it on my lipo box without trouble but I have some concerns to adress before I could seriously recommend it there is also the size to account for so just take my sugguestion with a grain of salt