I'm running a 3/4 wrap of 32ga kanthal on a 400 mesh straw wick in an AGA T2 with the air hole drilled to 1/16. I think I'll drill it out a bit bigger though. I prefer the straw wick over ss rope.
- Status
okcvapes the fatty v1 on smoktech natural 3/4 wraps 28awg cotton wick like seriously half a ball worth
I have a chalice, which is similar to the A7 in that the juice hole is in the center of the bowl, between the posts. It's not good to obstruct or stick the wick in there because it negates the draining benefit resulting in flooding.
Horizontal Z coils like this are money:
You mean with the loopie in the middle? Fold wire in half around a toothpick or drill bit, then wrap from center out. I saw a coil like that in some instructions for a cheapo atty, once. I used to use it when it was important for a build to have the legs come out of the same side of the coil. Here, I used it to allow for space/wick in the middle, as I thought maybe a 0.5Ω Micro-coil could use a little more wick to keep it wet.
Must buy 26 ga wire
It's a single enlarged to 1/16. The top (SS and hefty) is a bear to drill. I recently retired it for the summer cause it doesn't do humidity as well asy RM2s, I suspect due to relatively compact chamber size and air hole location. It is crazy good in cooler, dryer weather though.
I still think every bottom feed junky should own one (many have). They are a magnificent piece of engineering and quite beautiful with an amazing vape. I suspect that all of Mark Bugs products are of the same high quality. No other atty even comes close to the build quality of this beast.
I bet an opposing airhole would make this a better warm weather vape, but I'm not going to mess with it cause its too damn good when its cool and dry (7 months out of the year for me)
A bottom feeder is Next on my list. I spend too many hours a day driving.
I get"Don't drip and drive" stuck in my head.
I get"Don't drip and drive" stuck in my head.
Bro, come visit us over in the REOsmods forum here on ECF:
http://www.e-cigarette-forum.com/forum/reos-mods/
You only think you are vaping until you start using a REO
ThanksI have a chalice, which is similar to the A7 in that the juice hole is in the center of the bowl, between the posts. It's not good to obstruct or stick the wick in there because it negates the draining benefit resulting in flooding.
Horizontal Z coils like this are money:
Since I dont have reo and would use A7 on my sigelei mod should I build wick just resting on top of airhole? Seems sticking it in airhole a little bit would not make sense for any device .Ive only used genesis style devices so wanna know as much as possible before I get dripper
Thanks
I have never used one in a dripping application so I may not be the best source of info. Sorry
Damn you ! Lol thanks man for your helpI have never used one in a dripping application so I may not be the best source of info. Sorry
.Once i can afford a reo Im sure ill have plentyquestions for you
Bro, come visit us over in the REOsmods forum here on ECF:
Reos Mods
You only think you are vaping until you start using a REO
nice little "Supe-ism" there.
too true.
ProVari mini, AC9 atty, 28g kanthal @ 1.0 ohm, & xc-116 braided ceramic wick
Has been CRACKIN!
Thanks
You really want your air flow to hit the side of your wikicoil. As I understand it, you're wanting the air to come up the middle of your wick tube. Nopers.
If you want to try replicating/approximating Genny type air flow, try a vertical coil in a side air hole device. this is my igo-l
and variation in the RM2
Those are fabulous looking pdib, i really have no idea how you are so consistently creative! How does that one on the RM2 vape?
T
T
I did do an inverted coil where the air flows through the tube of the wick, and it alleviated some boredom; but it was certainly no better than a classic setup. also, with the classic, you can adjust how air hits the coil (top, bottom, center, etc) for adjustments in TH, flavor balance and such.
AWW, thanks supertrunker, That one was a while back, while I was transitioning from Genny to REO. It is a very nice vape. More the mellow Genny-type flavors. I'm more into the SLR micros now.
- Status
Similar threads
