Feeler - VV box mod?
- Thread starter B94Cast
- Start date
- th_trl_thread_readers 0
- Status
Update:
thehangdude - VC1.1 done - Received!
thindle -
hangin1 - VC1.1 done and shipped
boughtrecords - Parts being ordered
davidtop - ready when you are.
thughes - PM'd
coolone1 - Parts arrived!
dustydragon - Parts arrived!
cricket1176
jordonm41 - PM'd
grammakittykat - Ready when you are!
skydragon - Ready when you are able!
lilopera for some repairs - Will PM you - but I think I can get your critter fixed now
Grama's ready !! My birthday gift to myself,early!!! WooWooWooo!!!!! Have a Happy and safe 4th weekend!
Update:
thehangdude - VC1.1 done - Received!
thindle -
hangin1 - VC1.1 done and shipped
boughtrecords - Parts ordered
davidtop - on hold
thughes - PM'd
coolone1 - Parts arrived!
dustydragon - Parts arrived!
cricket1176
jordonm41 - PM'd
grammakittykat - parts ordered!
skydragon - Ready when you are able!
lilopera for some repairs - Will PM you - but I think I can get your critter fixed now
thehangdude - VC1.1 done - Received!
hangin1 - VC1.1 done and shipped
boughtrecords - Parts ordered
davidtop - on hold
thughes - PM'd
coolone1 - Parts arrived!
dustydragon - Parts arrived!
jordonm41 - PM'd
grammakittykat - parts ordered!
skydragon - Ready when you are able!
lilopera for some repairs - Will PM you - but I think I can get your critter fixed now
Last edited:
Howdy
I had an idea while working on dusty and cool's VC1.1, so I took a break off of those, and came up with this.
I call it the CP1
It uses two 14500 batteries in parallel. What that does for anyone that may not know, is makes it a 3.7V unit, but with twice the mah available - so essentially it is an 1800mah 3.7V setup.
I did this one in a clear case, and placed the LED so that it lights up the whole box. Looks really cool in the dark, and looks pretty good under standard lighting too!
This unit will have enough grunt to power most any low resistance/high current setup as well - so dual coils or whatever - will pretty hard. Part of running the batteries in parallel is that it gives the atty 3.7V like a single cell, but delivers the amperage of both - so good power and standard voltage.
Some (a bunch of?) pics:
If you would like one of these, let me know!
These are also more efficient than VV setups, as the only power being dissipated is by the atty. Theory isn't always perfect, but in theory if a VV setup lasted you almost a full day, then this setup would last you almost 2 days.
Thanks!
I had an idea while working on dusty and cool's VC1.1, so I took a break off of those, and came up with this.
I call it the CP1
It uses two 14500 batteries in parallel. What that does for anyone that may not know, is makes it a 3.7V unit, but with twice the mah available - so essentially it is an 1800mah 3.7V setup.
I did this one in a clear case, and placed the LED so that it lights up the whole box. Looks really cool in the dark, and looks pretty good under standard lighting too!
This unit will have enough grunt to power most any low resistance/high current setup as well - so dual coils or whatever - will pretty hard. Part of running the batteries in parallel is that it gives the atty 3.7V like a single cell, but delivers the amperage of both - so good power and standard voltage.
Some (a bunch of?) pics:
If you would like one of these, let me know!
These are also more efficient than VV setups, as the only power being dissipated is by the atty. Theory isn't always perfect, but in theory if a VV setup lasted you almost a full day, then this setup would last you almost 2 days.
Thanks!
Wow, simplicity. Very nice clean mod. Good work B9!
Oh, and my batteries and charger came in. Mod works great! Battery charger, not so much. So until Wednesday I am sitting here looking at my beautiful paper weight, with its blank LED. Mad Vapes is sending a replacement, no questions asked. *sigh*
Oh, and my batteries and charger came in. Mod works great! Battery charger, not so much. So until Wednesday I am sitting here looking at my beautiful paper weight, with its blank LED. Mad Vapes is sending a replacement, no questions asked. *sigh*
Last edited:
Wish madvapes would have done that for me, making me send back the shattered charger they sent me 
And it's not even "for" me...for an upcoming contest here on PIF...yes...more contests!! Squeeeeeeeeee!
B9...again, very nice work! You are totally amazing sir!
And it's not even "for" me...for an upcoming contest here on PIF...yes...more contests!! Squeeeeeeeeee!B9...again, very nice work! You are totally amazing sir!
Really nice. Could you put in switch for the led? It would come in useful in darkened rooms like theaters, etc.
Would we have to get 1 in each color? Color of the month Club.
Would we have to get 1 in each color? Color of the month Club.
Thanks!
Wish madvapes would have done that for me, making me send back the shattered charger they sent me
B9...again, very nice work! You are totally amazing sir!
Sure thing on the switch - and what is currently in there is a slow color change - to the color is constantly changing. Maybe I should do a quick vid or something.
Howdy
I went ahead and did up a quick video on the CP1 to show what it looks like and to explain a bit.
I went ahead and did up a quick video on the CP1 to show what it looks like and to explain a bit.
Great video B9! And a great, long lasting mod. "The nub no like the spring" I wrote that down.
Thanks . Heheh - I'm a bit mechanical still yet in front of the camera - but hopefully will start getting better!
. Heheh - I'm a bit mechanical still yet in front of the camera - but hopefully will start getting better!
I'd love to get in on this! PM me if you would consider shipping the finished product to the great white north! Thanks.
howdy cactusgirl
Im not sure about Canada - but I would imagine we should be able to work something out somehow.
will send you a pm.
thanks!
Im not sure about Canada - but I would imagine we should be able to work something out somehow.
will send you a pm.
thanks!
Update:
thehangdude - VC1.1 done - Received!
thindle -
hangin1 - VC1.1 done and shipped
boughtrecords - Parts ordered
davidtop - awaiting payment - will order parts as soon as I get it!
thughes - PM'd
coolone1 - build started!
dustydragon - build started!
cricket1176
jordonm41 - PM'd
grammakittykat - parts ordered!
skydragon - Ready when you are able!
Cactusgirl - Ordering parts!
lynleestart - received repair items, 1 fixed!
lilopera for some repairs - Ready for your repair items!
thehangdude - VC1.1 done - Received!
hangin1 - VC1.1 done and shipped
boughtrecords - Parts ordered
davidtop - awaiting payment - will order parts as soon as I get it!
thughes - PM'd
coolone1 - build started!
dustydragon - build started!
jordonm41 - PM'd
grammakittykat - parts ordered!
skydragon - Ready when you are able!
Cactusgirl - Ordering parts!
lynleestart - received repair items, 1 fixed!
lilopera for some repairs - Ready for your repair items!
- Status
