Feeler - VV box mod?

[B94Cast]

Just got home and the parts are here! Will get started here in the next hour or so

I'm so excited.... I got my battery order from mad vapes Going to charge them up tomorrow. Can't wait to see what you come up with B94Cast

Thanks again for hooking me up!

 

[B94Cast]

I am still looking into the feeder setups - from what I am seeing, it shouldn't be too hard to make one of those up. But haven't done one yet, and dont want to expirement with someone else's money - doesn't seem right
But I will try to order the parts to make one in the next few days so I can get a better feel for it. Regarding a standard non-feeder setup - I can make any of the box mods - from single cell on up, let me know what you are after and can work up a parts list for you

I'm definitely interested. What do you need for it? Can you make it into a 3.7v juice feeder? Let me know. This is a super PIF thread. <3

 

[B94Cast]

Would be happy to get that fixed up for you - I can pm you my info and get it fixed! Would be curious of pics if you have any - but not necessary - just might help to have some parts pre-ordered if it looked like it needed something I didn't have.

My "heavenly evil" box mod is sick and needs a new switch and wires....when things slow down for you in your modding adventures, if you'd like to "heal" it, let me know B9. It's a single AA box, very tiny, might be a pain to work with though.

 

[LilOperaGirl]

I would love it to run on 3.7v one 14500 batt. I don't mind supplying parts at all, just let me know what you would need. I'm willing to wait to see if you are able to do a feeder model. If you can't or don't feel comfortable with it, let me know.

 

[leannebug]

what an awesome thing you are doing!!!!

Gold Star Award Winner!

Question: can you make this into a 'box mod'?
Project Box 4.5" x 1.4" x 1.0"

The box mods interest me, and especially the VV part, but I need something as slim and/or small as possible.

 

[B94Cast]

Thanks
It looks to be a fun little project with some potential
With something that size, and to go vv - I would need to goto a switching step up power system, and probably have a top voltage at the 5v range - but running the 18650 in that would make for a pretty good power source and vape time.
Let me know and could work up some lparts lists to see if it's something you would want to do - have some good ideas for that box - need to measure some stuff

what an awesome thing you are doing!!!!

Gold Star Award Winner!

Question: can you make this into a 'box mod'?
Project Box 4.5" x 1.4" x 1.0"

The box mods interest me, and especially the VV part, but I need something as slim and/or small as possible.

 

[B94Cast]

Okey doke - sounds good . Hopefully have something here soon, intrigued by the feeder idea.

I would love it to run on 3.7v one 14500 batt. I don't mind supplying parts at all, just let me know what you would need. I'm willing to wait to see if you are able to do a feeder model. If you can't or don't feel comfortable with it, let me know.

 

[BiancaMontgomery]

Here she is:


Single AA box modhttp://www.flickr.com/people/87267225@N00/


It's a bit melty in there. http://www.flickr.com/people/87267225@N00/

The interesting thing about this mod is that I've never seen another that takes a 14500...I've only seen others this size taking the 10440.

 

[tiburonfirst]

since everybody is hanging about in here i'll ask and see what the answer might be, lol

can a dime or penny be safely used as a spacer in a mod? and if yes, it would go on the negative end of the battery, no?

or stop by the sparkplug thread, sky is in need of help -

 

[BiancaMontgomery]

I've used magnet spacers in my mods, but only on a single batt at the positive end Tib. Works great. If you need some, I can spare a couple, just PM me your addy.

 

[tiburonfirst]

i know you got earth magnet spacers - you showed them to me, lol

got to find a solution for sky without spending more money atm

 

[BiancaMontgomery]

i know you got earth magnet spacers - you showed them to me, lol

got to find a solution for sky without spending more money atm

Well, I'll send them to her then...just get me an address woman!

 

[tiburonfirst]

lol - come on over to the sparkplug thread and check out the situation

i might still have her address somewhere but i think first we need to make sure that's her problem

 

[B94Cast]

I can definitely fix that - interesting mod! I have a sneaky suspicion that clearance is an issue - will wait to order switch until I see this and measure the tolerances

Here she is:


Single AA box modhttp://www.flickr.com/people/87267225@N00/


It's a bit melty in there. http://www.flickr.com/people/87267225@N00/

The interesting thing about this mod is that I've never seen another that takes a 14500...I've only seen others this size taking the 10440.

 

[BiancaMontgomery]

Alrighty sir, will have it out Friday. Thank you for taking it on.

 

[B94Cast]

Howdy
Just finished up cricket's new 5V box mod
Will try and get it in the mail for you tomorrow cricket!

Some pics -

Works really well - I like 5V
I used some epoxy on the 510 connector, and the pic doesnt show the hot glue I put around the IC pins to act as insulation - but was just finished with the soldering and test firing and grabbin some pics.

 

[B94Cast]

sounds good - glad to be able to help!

Alrighty sir, will have it out Friday. Thank you for taking it on.

 

[TJVapes]

Just stopping in to let you know I received my new lil' red box today. Cute lil' vaper box. Thank you so much!

 

[B94Cast]

Happy to of been of help and glad that you like it!

Just stopping in to let you know I received my new lil' red box today. Cute lil' vaper box. Thank you so much!

 

[cricket1176]

Woohoo!! Looks great, can't wait to test it out!! I think it's going to be a perfect match for camping in the Smokey's next week I think I'm really going to like 5V...got my Thermo going at 6v now and when I can get the mod to fire I like it, but it's just not dependable at all.

Thank you B64cast!!!

Howdy
Just finished up cricket's new 5V box mod
Will try and get it in the mail for you tomorrow cricket!

Some pics -

Works really well - I like 5V
I used some epoxy on the 510 connector, and the pic doesnt show the hot glue I put around the IC pins to act as insulation - but was just finished with the soldering and test firing and grabbin some pics.