Dude, you're looking at the size of the reel.
You get 30 feet, as pictured.
I never look at those numbers anymore, under "Specifications." I have no idea what those numbers pertain to.
Focalecig chat...Part 2
- Thread starter Nailz
- Start date
- th_trl_thread_readers 0
- Status
You get 30 feet, as pictured.
I never look at those numbers anymore, under "Specifications." I have no idea what those numbers pertain to.
Today I received the Nectar RTA. Its a nice clone for $9. Easy to build, although so far I think the flavor is good, but not great. May need to experiment with different juice to see if something stands out in it.
Forgot to post picture of the Inspires 60 watt TC zero I got Friday, this is box is worth every cent, well made and works really well, and since had it, I am really impressed with the battery time I get with it, tested in both normal and TC modes and both worked great, one of the best mods I have got 
Also got the bottom fed velocity pictured on top, which seems good, but not really used it much yet, as been stuck on using the zero
Also got the bottom fed velocity pictured on top, which seems good, but not really used it much yet, as been stuck on using the zero
Where on earth is that one hiding?!?Forgot to post picture of the Inspires 60 watt TC zero I got Friday, this is box is worth every cent, well made and works really well, and since had it, I am really impressed with the battery time I get with it, tested in both normal and TC modes and both worked great, one of the best mods I have got
Also got the bottom fed velocity pictured on top, which seems good, but not really used it much yet, as been stuck on using the zero
All I can find are the 50 watt versions!
Also nice to see, Nailz.
Sent from my iPhone using Tapatalk
Where on earth is that one hiding?!?
All I can find are the 50 watt versions!
Also nice to see, Nailz.
Sent from my iPhone using Tapatalk
It is here - $70.49-$73.42 Zero 60W Temperature Control Variable Wattage Box Mod - Blue
The only con so far is, I can't find a way to lock resistance in nickel mode, still vapes great, so not really been too bothered
conversion of focalecig marquis to bottom feeder, using long M3 bf pin included in fatdaddy's kit.
you have only to drill tiny hole(s) in the positive post, at desired height (easy), and replace the original 510 pin with the bf one (which fits like a glove, no need to sand it).
you have only to drill tiny hole(s) in the positive post, at desired height (easy), and replace the original 510 pin with the bf one (which fits like a glove, no need to sand it).
Not so easy but affordable conversion to bottom feeder of the great samurai ( http://focalecig.com/…/Samurai-StyleRebuildable-Dripping-At… ) and zenith v2 ( http://focalecig.com/…/Zenith-V2-StyleRebuildable-Dripping-… ); i love both.
You need a bf pin of M2.5. Found mines in fatdaddys (3 for $4).
Length of thread: 6mm (min) to 11mm (max), for samurai; 3 to 5mm, for zenith (you'll have to sand it a lot)
Drill inside the positive post (using a tiny cutting miller), to allow the juice to pass through it. It's about 1.5 to 2mm to drill. samurai was easier than zenith.
Drill tiny hole(s) in same positive post at desired elevation, to allow the juice go out of it (i didn't do it in zenith: juice goes out through the coil hole).
Replace the original 510 pin with the new bf pin, and sand it (thread and head) with a file to get desired length.
(sorry for the quality of the pic: nighty one, bad camera..)
You need a bf pin of M2.5. Found mines in fatdaddys (3 for $4).
Length of thread: 6mm (min) to 11mm (max), for samurai; 3 to 5mm, for zenith (you'll have to sand it a lot
)Drill inside the positive post (using a tiny cutting miller), to allow the juice to pass through it. It's about 1.5 to 2mm to drill. samurai was easier than zenith.
Drill tiny hole(s) in same positive post at desired elevation, to allow the juice go out of it (i didn't do it in zenith: juice goes out through the coil hole).
Replace the original 510 pin with the new bf pin, and sand it (thread and head) with a file to get desired length.
(sorry for the quality of the pic: nighty one, bad camera..)
hi, mate =))Just sticking my head in the door to say hey, so Hey! So how's everybody been? What's new?
as you can see, i'm spending my little spare time in updating the old gear.. how are you?
i've heard that focalecig will might stock bottom feeder pins to allow us to convert our old rdas to dual mode (squonk/drip). we only need to drill the out holes up enough (or even use the coil holes of the positive post, no extra holes).
btw, the magma is easily converted as well, using a M3x10 bf pin (5x2 head -diameter x length-).
just replace the original 510 pin with the bf one, and drill a 1.5-2mm hole in the middle of the white delrin which is in the deck.
i had to sand the diameter of the pin head from 5 to 4.5mm, though, and added a 4x1 o-ring under it, because the perfect pin should have a head of 4.5x3mm (total length of the pin, about 11-11.5mm).
I've been good! Been feeling the best I have in years, like my old self. I've been keeping busy this summer, getting a lot of things done around here and loving the weather. I can't believe I already have to start thinking about prepping for winter, where did summer go? Lost touch with you guys on this thread, figured it was long over due for me to stop by, I've got to track down Nikkita and say hello. I haven't bought much vape gear other then a couple DNA200 boards, I have one mod built and really enjoying being able to connect with the mod via my computer and play with all the settings. I want to make some custom screens and upload them to the mods but I've got to learn what software to use. I did order a couple small items from focal last week but I didn't have time to look around, I really need to see what's new there, hope Doris is still there? Other then that, not much else going on with me, no bad stuff either so I'll count my blessings and be thankful life is calm for a change!
it's great you are feeling the best in years!
lol, i'm also far away this thread (but also from others). still a bit busy with my cell game, lot of issues with android.
Doris/Jieyan is still there; you know she is the mouth, ears, and soul of focalecig. if she weren't there, i'm afraid that fc would sink down
lol, i'm also far away this thread (but also from others). still a bit busy with my cell game, lot of issues with android.
Doris/Jieyan is still there; you know she is the mouth, ears, and soul of focalecig. if she weren't there, i'm afraid that fc would sink down
They have a new mech this morning they should consider renaming
Ha!! It's engraved with that too.
Ha!! It's engraved with that too.
Someone might want to tell Doris to call it The Finger or something.
- Status
Similar threads
- Locked
