Focalecig chat...Part 2
- Thread starter Nailz
- Start date
- th_trl_thread_readers 0
- Status
Collection has came to a halt. Haven't bought much things lately. Just using what I have. Got to the point of getting tired of vaping. But since been on the coil building threads, and it has sparked me again to build.
So I ordered a few more attys to try.
Been using my Sig 100 since I purchased it and all of my Origen drippers. But ordered a mini Velocity, Petri and such to try.
Aww I see bro. Saw your Blacknote collection for sale last night and almost jumped on it. But haven't tried them. Your was in 6mg and I need 12mg. At the same time I purchased the Notebook.
Been on a juice binge myself but I've wasted more money. I've ordered Cuttwood, Jimmy The Juiceman, Tug Sauce, Coval Vapes and much more but they are not to my liking. Should've just got Wakonda and CL, my usual.
I've been using sub tanks but I ended up grabbing a Twisted Messes RDA from my local shop & after a quick lesson I built my first coil. My build came out at .14, 11 wraps of 28 awg Ni200. I'm loving TC dripping
Nice. I gotten away from TC. My VFBF from FC kind of sucks donkey. It didn't get along with me as much. I'm more still chasing flavor and need attys so follow suit. Hopefully this Petri is like the Origen
When i seen you posted today,that's the first thing that came to mind,was wondering how that bf flask was going.I haven't used the one from Focal,but i have one from Angel ecigs and one from 3fvape,and they are both great.I don't think these 2 are from the same mfr. as the one from Focal though,as my black one is straight black,doesn't have the metal flake like yours does.
Doris emailed me and told me it was only 40W model and not 50W like listed.
Also when I was building the readings and vape was not as good. But I will try again later. I had the temp all the way up and it was just a little sizzle vape.
Yeah,both of mine are 40 watt,the temp control on mine works really good though,maybe even a bit too good,i think they are getting hotter than they say,because a twisted build at 430 degrees gets super hot super fast haha.I don't mess with temp control too much though,so i just run them in normal mode and they both work really well that way.I was concerned when i got my first one,because so many people were complaining of leaks in their authentic's,but i haven't had any leaking issues at all.
Maybe I need to buy higher gauge nickel wire. Also reading at .08 using a single 18650 battery goes quick.
Holy crap, its been forever since I've posted in here. Still not liking the new forum layout.
Placed an order with FC a week or so ago. I dabbled my fingers in some BF action with a Smokeless Owl I got on a groupbuy from FC and decided I wanted to play a bit more. The Smokeless Owl is starting to crap out (plastic body, bleh) so I ordered up the Kui, reos, and a handful of BF attys. I picked up the zenith BF version from ebay, and I love it (minus the crap grub screws that one stripped on the original build)
Placed an order with FC a week or so ago. I dabbled my fingers in some BF action with a Smokeless Owl I got on a groupbuy from FC and decided I wanted to play a bit more. The Smokeless Owl is starting to crap out (plastic body, bleh) so I ordered up the Kui, reos, and a handful of BF attys. I picked up the zenith BF version from ebay, and I love it (minus the crap grub screws that one stripped on the original build)
If you like the smokeless owl,you will definitely like those others.I have all 3 of those,and the Reo clone is my favorite of the 3,but the Kui is very nice too.
Oh I LOVE the smokeless owl, really do. I've realized that bottom feed dripping is what I've been looking for since I've started dripping. So convenient and mess-free. Did you have to take the reo clone to the grinder to fit 22mm attys? From what I've been reading, that's the case.
Wish I had more of an update on my order, because "muster order" doesn't say much. I ordered on sept 24th, and realized they were on holiday until the 6th, but I'd like some type of timeline. I'm not new to ordering from FT/GB/FC, so I know about the woes of china suppliers.
I've recently gotten into dripping & love it with TC. I don't see many TC squonkers on FC but I'm thinking a clone is a great way to try it. Is the vapor flask clone the best so far? There are two versions that are sold out & another one that looks similar, is it a safe bet or should I look for something else?
Haha, haven't even thought of doing it that way. That'll do it though!
Only of other VW bottom feeder I know is the geyscano, but I dont think thats TC. I've never dabbled with anything TC to be honest.
FC has the Inoy TC squonker now, 40W and 60W. I'll be receiving one for review shortly.
There are a few out there.There are various makers of the Vapor flask sqounker,i haven't tried the one from Focal,so not sure if the ones i have are the same or not,but the 2 i have work great,and i only paid $40 each for them.The Geyscano has temp control,but i have seen alot of people say the chip went out on them in a month or less.Another option that just came out is the Kangxin Inoy,it has tc,and comes in a 40 watt or 60 watt version,the 60 watt with an atty is just over $50.I haven't seen any reviews on it yet,but i have another Kangxin mod with tc,and it has worked just fine.
I agree,the smokeless owl holds a special spot with me because that was my first bottom feeder,and it was what converted me haha.I liked it enough to try out others,and now i am up to 3 mech bottom feeders and 3 vw bottom feeders,with plans to get 1 more mech and 1 more vw,this all started because of that little smokeless owl haha.
Yeah,i used a grinder and a file on my Reo clone,but Roxy's idea is much better and cleaner looking haha.
Is that Aqua SE authentic? I think it is, very tempting. It does not say style or anything to say its a clone. I really want the Aqua FX it looks pretty good prolly going to order one tmrw.
- Status
Similar threads
- Locked
