Focalecig chat...Part 2

[roxynoodle]

Got the Wotofo ZNA, other then the loose fit between the caps and tube it looks pretty good, I got the cheaper one and expected I may have to do some tinkering so I'm not going to ....., I'm happy to have it. Nothing I can do for the loose fitting caps but I will fix the poor connection due to the coating on the threads of the main body and I'll tweak the throw of the fire switch so it will have more travel, it's a very short throw before it fires. I don't have any 18500 battery's, I'll wait for a good deal to pop up. I've been running it on a 18350 with a spacer I made and have been using it since yesterday after noon, it works just fine with my Protank's at 7 watt's. I'll wait until I get the top cap connection fixed before I try and crank it up on a dripper.

Got a couple questions for you folks that have one, can I change it from watt's to volt's and if so how? Secondly, didn't someone post pics of the ZNA striped down? Please don't go searching for the post or pics, just wondering if someone knew who and where then that would help narrow my search.

I think it was Drifter who broke one down, but I think it was the Robbot.

My Wotofo is all nice and tight. I can flip the screen from left to right, but I think you're stuck with watts.

 

[roxynoodle]

That sucks about your FT KF hun .. I am trying to imagine how the 510 got stuck though, this is boggling my mind.

Quite honestly, I think Tobeco had previously gotten a bad wrap via clones of their clones ... and yes, Tobeco products have been cloned in the past, right down to their packaging. At least the newer clones of Tobeco clones have stopped reprinting their name, but when you playing the game of cloning authentics, there is no reason to think that as a cloner you are off limits to the same happening to you.

The Aqua V2 and the KF4 are the only two Tobeco products that I have ever owned or used, but I am thoroughly impressed with both. I vaped my first tank on the Tobeco KF4 dry like nobodies business. I also liked that Tobeco burned/polished the edges of their glass tank, although their glass tank section is thinner than Robbot's KF4.

Maybe they cross threaded the 510 pin. I don't know. I can't budge it.

 

[cobalt327]

Woohoo just won another $10 coupon on the spinner, now the Marquis is going to be mine for sure

Spinner?

 

[Nailz]

Spinner?

Yep, use points you earn to spin and maybe win - Focalecig -Best E-Cigarettes - Worldwide Free Shipping

 

[inswva]

Spinner?

FC Wheel of Destiny!!!!

Focalecig -Best E-Cigarettes - Worldwide Free Shipping

Nailz seems to have preternatural luck on the FCWOD. Personally, I've won two $10 codes and, most recently, the copper Cartel mod clone set. More often than not, I hit a blank space on the FCWOD... but, I keep coming back for more.

edit, Nailz beat me to the punch once again!

Yep, use points you earn to spin and maybe win - Focalecig -Best E-Cigarettes - Worldwide Free Shipping

 

[jbarrick]

My first attempt at Vape Porn, what do ya think?

[/IMG]

 

[inswva]

Another FC order has been placed... this one promises to be a good one!

 

[Dude65]

That's some serious Vape Porn

 

[inswva]

My first attempt at Vape Porn, what do ya think?

[/IMG]

Looks great Jeff! I'm not sure you enough box mods though.

I'm building a DIY light box this weekend to really up my porn game.

 

[Nikkita6]

Wow, I'm feel super lucky right now...about to go buy a lotto ticket. I spun the wheel one time last night and won a free Cartel mod, spun it again one time this morning and won a $10 coupon.

That is it! I need to spin the wheel too .. but tell me again where it is on the site? I only ever check new arrivals and my order status, I have no clue where the casino is But I am jelly and I need to win something

Well, in other news ... DHL finally delivered my Taifun GT 2 at 6:45pm But I actually thought is was coming Monday, so I can't complain. And boy she is nice

 

[Nikkita6]

Got the Wotofo ZNA, other then the loose fit between the caps and tube it looks pretty good, I got the cheaper one and expected I may have to do some tinkering so I'm not going to ....., I'm happy to have it. Nothing I can do for the loose fitting caps but I will fix the poor connection due to the coating on the threads of the main body and I'll tweak the throw of the fire switch so it will have more travel, it's a very short throw before it fires. I don't have any 18500 battery's, I'll wait for a good deal to pop up. I've been running it on a 18350 with a spacer I made and have been using it since yesterday after noon, it works just fine with my Protank's at 7 watt's. I'll wait until I get the top cap connection fixed before I try and crank it up on a dripper.

Got a couple questions for you folks that have one, can I change it from watt's to volt's and if so how? Secondly, didn't someone post pics of the ZNA striped down? Please don't go searching for the post or pics, just wondering if someone knew who and where then that would help narrow my search.

Don't know why you have loose fitting cape or a connection issue. I did get mine way back when FC first got them in August but still .. I have no conductivity or connectivity issues. The threads should not affect your conductivity being a regulated device.

Also this is a variable wattage device, its not variable voltage ... this ain't the Vamo Willy Drifter posted pics of the Robbot ZNA but it is not the same as your Wotofo fun.

 

[Nikkita6]

Maybe they cross threaded the 510 pin. I don't know. I can't budge it.

Ok thats possible ... or there is some .... that has welded it in there?

 

[Nikkita6]

Another FC order has been placed... this one promises to be a good one!

Sweet! Make sure you keep this one in pristine condition just in case I have to float this review to you I do plan on reviewing it ... but ya never know! Its not as small as the IN'AX Nano, but its not much bigger either.

 

[Nikkita6]

FC Wheel of Destiny!!!!

Focalecig -Best E-Cigarettes - Worldwide Free Shipping

Nailz seems to have preternatural luck on the FCWOD. Personally, I've won two $10 codes and, most recently, the copper Cartel mod clone set. More often than not, I hit a blank space on the FCWOD... but, I keep coming back for more.

edit, Nailz beat me to the punch once again!

I just spun 3 times in a row and lost 3 times in a row so I am out while I still have 55 points left I never saw this page before, but I think its cool how they list all the winners names

 

[jbarrick]

Looks great Jeff! I'm not sure you enough box mods though.

I'm building a DIY light box this weekend to really up my porn game.

Alot of the people in this thread seam to collect or at least buy a lot of drippers. I buy box mods. I still need SX Zero, then the SX Mini.

 

[Nailz]

FC Wheel of Destiny!!!!

Focalecig -Best E-Cigarettes - Worldwide Free Shipping

Nailz seems to have preternatural luck on the FCWOD. Personally, I've won two $10 codes and, most recently, the copper Cartel mod clone set. More often than not, I hit a blank space on the FCWOD... but, I keep coming back for more.

edit, Nailz beat me to the punch once again!

We are about even, I have won 3 $10 coupons on it, and that is what I am happier getting, the cartel is a really nice mech, but not into mechs anymore, blame Nikki

 

[Nailz]

I just spun 3 times in a row and lost 3 times in a row so I am out while I still have 55 points left I never saw this page before, but I think its cool how they list all the winners names

I've lost more times than I have won, but never interested in any of the products they offer for points, so I take the gamble instead

 

[inswva]

Wow, I'm feel super lucky right now...about to go buy a lotto ticket. I spun the wheel one time last night and won a free Cartel mod, spun it again one time this morning and won a $10 coupon.

The Cartel set is pretty decent. I received mine this morning. Switch isn't bad and it's an attractive looking set. But... since I really didn't have a lot of interest in it, I flipped it and used the PP funds for other FC goodies.

 

[inswva]

Sweet! Make sure you keep this one in pristine condition just in case I have to float this review to you I do plan on reviewing it ... but ya never know! Its not as small as the IN'AX Nano, but its not much bigger either.

lol... I will baby it, just in case.

I'm not sure what the heck happened with my Nano... I did a cotton build this afternoon (which didn't work very well), went to take it back out, and now my top cap won't thread onto the atty base at all. Threads are clean, I wasn't drunk (at that point in time), and nothing seemed obviously amiss. But, now, I can't put it back together. It's completely F'd. Not a huge deal as my Nemmy hybrid parts should arrive soon and I plan on running the Nano tube with a Derringer.

 

[cramer]

Thanks for the info everyone. It does show voltage when firing... It shows high by .1 on it and the ohms.

Sent an email about the "Too Hot" to see what they want me to do.