I can't say that I'm overly impressed with my Quasar, I don't like that O-Ring situation.
Do you have IGO-W7 ?
Fogger V4!!
- Thread starter Shofixti
- Start date
- th_trl_thread_readers 0
- Status
I can't say that I'm overly impressed with my Quasar, I don't like that O-Ring situation.
Do you have IGO-W7 ?
I had a feeling about those things.... Didn't look right to me... I got that instead of the w7....
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Should've gotten W7. Why is it so expensive?
But, then again, the W7 is very similar to Origin and you'd have two of a same kind. Like that ever stopped us?
But, then again, the W7 is very similar to Origin and you'd have two of a same kind. Like that ever stopped us?
Last edited:
Yeah that's why I went with the quasar, I wanted a 22mm dripper w/ small chamber and one with deep wells. For the record, Wells were officially my idea, I milled a moat into an igo when I built my bottom feeder, it works fantastic. I also made a cap that's 22mm, the Igo is like 19 or something ugly, and has a super reduced chamber, looks dope works even better!
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Wish I had the tools and skills to be able to do things like create a well in a rda. I find it difficult just to modify them for bottom feeding
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
The easiest way I find to do that is to remove the pin, groove it vertically @ 3,9 o'clock done it will flow better than drilling the center. I much prefer a hole in the deck I can stuff like a 17ga needle thru, much faster better liquid delivery / recovery.
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Rewicked my Fogger 4.3 with Rayon (CelluloCotton) the other day. Did it kind of like a kayfun. Put a healthy amount of CC through dual 2mm coils, screwed the chimney base on, cut the wick level with the chimney base, then stuffed it back down into the chamber on top of the channels.
No leaking, no dry hits, and flavor for days. Literally. Been through like 5 tanks and it still tastes like I just rewicked it. Amazing stuff.
On a side note about Rayon.. I removed what appeared to be a dirty Rayon wick from my Russian the other day, ready to rewick just out o habit.. but a funny thing happened. As I was rinsing my tank, the Rayon just so happened to catch some water as well. The "gunk," came right off, only to reveal that the Rayon was still strikingly white. Like brand new white. Nothing even close to a scorch mark.
No leaking, no dry hits, and flavor for days. Literally. Been through like 5 tanks and it still tastes like I just rewicked it. Amazing stuff.
On a side note about Rayon.. I removed what appeared to be a dirty Rayon wick from my Russian the other day, ready to rewick just out o habit.. but a funny thing happened. As I was rinsing my tank, the Rayon just so happened to catch some water as well. The "gunk," came right off, only to reveal that the Rayon was still strikingly white. Like brand new white. Nothing even close to a scorch mark.
I bought a couple of drip tips on a drip tip shopping craze. By now I only like some resin cast and acrylic drip tips. I liked stainless steel ones first because of shiny, but actually resin or acryl feels much better than cold materials. Aluminium might be a problem with something like a really hot dripper though because aluminium transmits heat very well, unlike stainless steel.
Otherwise, just go with what you like, I like the ming vase style and big ones.
http://shop.jmmods.eu/drip-tips-akrylic-drip-tips-c-6_22.html
http://pink-mule.com/drip-tips_/cherry-vape-dream-drip-tips?limit=100
Pink mule has some even prettier ones but they are always sold out :/
Last edited:
So on Angelcigs appeared a Fogger V4 that appears to be the original version. The box looks completely different. I don't know if this could possibly be the rumored 4.4, or more likely some sort of clone. I got the original version and loved it, wanted to buy a back up, but all the bad revisions came out so fast I missed my chance. I'm debating giving this one a try.
Fogger V4 RBA Rebuildable Atomizer
Fogger V4 RBA Rebuildable Atomizer
You should shoot them am Email to ask, Yelm them to put it on the site BTW.
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Email sent. Too bad they're not offering in black.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Never know they might they are growing they just opened an office in LA and they have one in Germany as well.
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
When they should've bought a new CNC lathe/mill instead and hire some people who knows how to use it...
I noticed in the picture, it doesn't have the copper center screw.
I noticed that, and it looks to me that it doesn't have an o-ring around it either, that and the box are what leads me to think it's a clone.
got a black 4+ today. Frigging unbelievable at how good it vapes. drained a tank in 45 minutes. Easy to build. Wish it held more juice. Airflow ring doesn't stay set. I'll fix that with teflon tape. Pretty stoked at how good this is!
Also got my Fogger V4+ today. After one burned up coil and one burned up wick, I sucessfuly have twin #500 mesh wicks running in it. The vape is incredible! The flavor is absolutely intense. No issues so far with wicking but I can certainly tell I'm going to need to do something about the air flow control ring being so easy to move. Very happy though with the results! Hits harder than my AGA-T2 on mesh by far.
Anywhere one can buy the deck insulator? Mine seems way too thin and it's thinning out day by day lol
- Status
Similar threads
- Locked
