Fogger V4!!
- Thread starter Shofixti
- Start date
- th_trl_thread_readers 0
- Status
It is Seven 30 by Pioneer4you using SX-300 chip which is NOT pulse modulated.
I'll tell you, if you promise not to tell TBev
IMHO: Big Buddha is much, much, much better then the Big Fogger and all of the Big Kayfuns combined.
That said, I could not compare it to V4.1 because they are in the different category. It will be like trying to compare .50 Caliber bullet to 30-6. You can't.
VFT is on par with that of a Fogger, maybe a notch better.
But the "ease of use" is on the different level, way above the Fogger.
I'll say: "Any body cold build it and it will work on the first try"
Here is my second build on it using 26 Gauge wire. It worked flawlessly for about 30 Ml of liquid until I realized that I made a mistake. I rebuilt it in my truck while parked at a rest stop. Bad lighting, lack of my favorite tools and I was tired too. It worked fine until I came home and opened it. One of the coils is 8 wrappers and the other is 7.
Last edited:
I have modulation on the EMech. It hasn't bothered me, while the Cana is out on injury. This gimmicky device is actually growing on me. I don't forsee me 'needing' to use the SX330 v2 or v3 on the Fogger?
Sent from my Highly Modified HTC One via Tapatalk
Sent from my Highly Modified HTC One via Tapatalk
I'll tell you, if you promise not to tell TBev
IMHO: Big Buddha is much, much, much better then the Big Fogger and all of the Big Kayfuns combined.
VFT is on par with that of a Fogger, maybe a notch better.
But the "ease of use" is on the different level, way above the Fogger.
I'll say: "Any body cold build it and it will work on the first try"
Here is my second build on it using 26 Gauge wire. It worked flawlessly for about 30 Ml of liquid until I realized that I made a mistake. I rebuilt it in my truck while parked at a rest stop. Bad lighting, lack of my favorite tools and I was tired too. It worked fine until I came home and opened it. One of the coils is 8 wrappers and the other is 7.
I know the Orchid will be an easier build as well...better?
...just a notch better isn't enough for me to jump on a 26650 though. That FT 26650 Copper 4Nine almost got me...still might.
Sent from my Highly Modified HTC One via Tapatalk
If they made that budda in a 22mm I'd check it out , I just recently held a 26650 mod and it was not cool imo.
Last edited:
That's quite the collection of personal protection devices...
I mean 26650 mods
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
My 15 year old cat kind of ate my vape money about 10 days ago, $1350 vet bill. Mostly dental.
Check this out guys:
Cloud Chaser's 24, 22 and 20 Gauge wire flattened as ribbon.
Here is the link to it: metrovaporshop
Rip Trippers Review on it:
Cloud Chaser's 24, 22 and 20 Gauge wire flattened as ribbon.
Here is the link to it: metrovaporshop
Rip Trippers Review on it:
Runnin dual 30ga 13 wrap coils on the fogger provari combo at 1.23 ohms and 4v and this thing is a beast
Looks good, thanks for the info and pictures! I wonder how these look like on a box mod?
Unfortunately 60 for the Big Buddha in Europe :/
I actually prefer the 26650 form factor for home use much to the thin tube mods that topple over all the time.
I just did this Voltage Drop test to be able to answer your question.
In both (Regulated and Unregulated) device tests, I used the same MNKE 3500 mAH 3.7V freshly charged battery and the same Big Buddha at 0.5 Ohms.
Watch that .5 on the Seven 30 it's known to fry them. Good news is when it does you can do what I did and put in an SX350 and have a Seven 50
.
To any Fogger peeps who want to give the Orchid Clone a try. I received notice that voxvapes will be shipping out today before post office closes.
$19.95 shipped from Mississippi. I know I'm not the only one here that wants to know what's up with this one.
http://pages.ebay.com/link/?nav=item.view&id=231291639094&alt=web
Less than 50 of them are available...
Edit: I want to know that Tbev tried one more than I want to see the truckers build...but with no 26650 option...will he order one?
Sent from my Highly Modified HTC One via Tapatalk
$19.95 shipped from Mississippi. I know I'm not the only one here that wants to know what's up with this one.
http://pages.ebay.com/link/?nav=item.view&id=231291639094&alt=web
Less than 50 of them are available...
Edit: I want to know that Tbev tried one more than I want to see the truckers build...but with no 26650 option...will he order one?
Sent from my Highly Modified HTC One via Tapatalk
Last edited:
Good sell!! Hehe I got one. For that price w/free shipping too hard to pass up.
Should the OP change the name of this thread by adding "killer" at the end? Im joking thanks for sharing! Now if my ipv comes in this should be a great week ahead!!!
Last edited:
Well, this clone is still untested by Fogger users.
If it proves to be an equal vape, which is still a win, I'll be the first one hunting a copper Fogger v4...
Edit: I'm waiting on IPV 2 as well, and a Sigelei 100W, I'm ...... I paid more for the IPV coop than the Sigelei...not sure what this IPV 2 vid means? ...to end users?
http://youtu.be/oFbFVhhHe8A
Sent from my Highly Modified HTC One via Tapatalk
If it proves to be an equal vape, which is still a win, I'll be the first one hunting a copper Fogger v4...
Edit: I'm waiting on IPV 2 as well, and a Sigelei 100W, I'm ...... I paid more for the IPV coop than the Sigelei...not sure what this IPV 2 vid means? ...to end users?
http://youtu.be/oFbFVhhHe8A
Sent from my Highly Modified HTC One via Tapatalk
Last edited:
The video seems to indicate that the iPV is capable of 100 watts, based on the readings on the volt and ammeters.
- Status
Similar threads
- Locked
