Fusion problem

[cba191]

I think If I decide to try the fusion, I'll try the avid though.
How different is the fusion from the platinum and the gold though? I really like the platinum.

 

[cba191]

Alrighty then

Sorry if that came out a bit terse. I've just been having some rough luck with cartos lately.

 

[loft]

No worries; I can't really compare them though... Fusions are the only cartos I use when I don't use atomizers. I haven't used the Gold/Gold V2/Platinum line since February.

 

[Wharf Rat]

Most agree the Fusion is the best out there (inside and outside this sub forum).

 

[cba191]

I ordered a box of gold v2s lr, platinums, and fusion lrs, along with the stealth adapters. Boges haven't liked me lately.

 

[misplacedsooner]

im having a problem with my fusion also in that im just getting a burnt taste. got about 20 drops of liquid in it. with all the reviews im sure its something im doing wrong.

 

[mwa102464]

You dont have to use a stealth adapter, with a reg adapter even where talking 3/8 of an inch here or so, that shouldn't make or break carrying a mod in anyone's pocket I dont think. The V2 Gold is also an Excellent choice of Carto

 

[cba191]

But 3/8 plus the 3/8 on the fusion itself makes for 3/4" from the connector to the tank. that's more than a bit of extra torsional stress on the connector.

 

[mwa102464]

im having a problem with my fusion also in that im just getting a burnt taste. got about 20 drops of liquid in it. with all the reviews im sure its something im doing wrong.

Try using the spin meathod once you fill, another thing is this = when you fill a carto you really should let it sit for a while before use,, its kind of just like priming an Atty where as you need to make sure your internals are completely wet otherwise you are risking burning of the center filler part prematurely, fill, spin, fill, let sit for a bit, top off and use, try this method misplacedsooner. Think about Prefilled cartos that people buy and how long they have been sitting with liquid in them before use from the factory, to the vendor, to the end user, the center is surely primed well

 

[misplacedsooner]

i will give this a try..thanks bro

 

[mwa102464]

But 3/8 plus the 3/8 on the fusion itself makes for 3/4" from the connector to the tank. that's more than a bit of extra torsional stress on the connector.

No CBA, THAT IS NOT CORRECT,,,, take an Ego Batt, put a reg 510 to 801 adapter on one Batt and screw on a Fusion Carto
2. screw on a reg Boge Carto to another 510 Ego Batt, there is EXACTLY 3/8" difference in height TOTAL !!! Not 3/4" I just did it

And if you use a stealth adapter it could even be less, I'm not gonna check though

 

[cba191]

hmmm. I'll look into it. The biggest problem will be spending the $15 bucks on adapters just to see if I like a carto or not.

 

[mwa102464]

hmmm. I'll look into it. The biggest problem will be spending the $15 bucks on adapters just to see if I like a carto or not.

You can get this adapter for like $3 or maybe even less

 

[cba191]

You can get this adapter for like $3 or maybe even less

K. I'll look around. I have 2 of the ikenvape adapters if anyone wants them for cheap(er).

 

[mwa102464]

K. I'll look around. I have 2 of the ikenvape adapters if anyone wants them for cheap(er).

CBA, just a tip, you may want to hold onto those, I must have over 200 adapters/Connectors of all different types, they come in handy plenty down the road at the lease expected times, especially when different Mods and Cartos/Atty come out.

 

[ukeman]

I'm so happy with the Fusion in my tank that I don't even try the 510 cartos that i have anymore. I'll have to trade them out of sell them off. Some are Ikens too.
Reason is that once I love something, why bother with anything else especially if it didn't work out too well.
I'll go back and try the Iken cartos again thanks to this thread though.

How often do you folks change out your carto?
I am settling on about 2 tankfuls... around the 3rd i start to get less of a fabulous vape and I figure, at $1.90 a pop, wth.

 

[5cardstud]

If that is the gold adapter from Ikenvape all you need to do is pop the center post out and put it back in the opposite direction. Then it works great. I have 3 or 4 of them and like MWA I have adapters galore from other places.

 

[cba191]

If that is the gold adapter from Ikenvape all you need to do is pop the center post out and put it back in the opposite direction. Then it works great. I have 3 or 4 of them and like MWA I have adapters galore from other places.

The stealth adapter?

 

[5cardstud]

The stealth adapter?

It was listed in the stealth adapters.
It's this one on the left. If you reverse the center post it works great. The center post is larger on one end causing it to mess up on some pv's but I love these adapters after I turn the center post around.