G-Tank-US-CO-OP Support Thread

[Maz]

Maz, this isn't the bible or Phil Collins, get your spelling right: genisis. Furthermore, are you up to speed on EU patent regulation? Has your experience with Germany shown you a lack of thoroughness? There are modders that are quite satisfied in other areas of life, particularly in their careers, that this is simply a fun hobby. Just look at raidy's vacation record over the last year.

Beyond all of that, challenges following the art of yours, only increase the liklihood of discouraging some great modders from ever sharing again.

sent from my HTC genisis using Tapatalk

You are pulling me up on spelling? Impressive.

You are involved with projects that to my knowledge do not have Raidy's prior approval. You have asked for a mini genIsis from ***, so you are not just spouting the same hot air we've all heard hundreds of times before, you have also just shown yourself to be a hypocrite.

Show us the patent, tell us honestly that you have seen it or .....

 

[cos]

Well put. At first there were a handful of us doing this, but since the popularity of co-ops I think newbies need to realize this and hang in there w/ it.

After that you're rewarded by vaping indepdendence

Yeh Turbo remember when all this first started with the Hybrid Genisis minis here in the US. i dont remember the actual amount of Genisis that were made and sold in kit form but i think about 50. correct me if i am wrong. That number sure has grown with all the CO-OPS. and by Dan doing most of these we are all getting a good quality Genisis that will last forever. all we have to do ius change mesh and Kanthal. No more ordering of atties. Makes me want to cry lolol.

 

[mj64]

All this hubbub about patents is welcome in this thread: http://www.e-cigarette-forum.com/forum/modding-forum/219999-patents-discussion-issues.html

 

[Maz]

All this hubbub about patents is welcome in this thread: http://www.e-cigarette-forum.com/forum/modding-forum/219999-patents-discussion-issues.html

Fair point, I'll refrain from posting further on the subject in this thread. It's off topic anyway, apologies to Dan.

 

[asdaq]

If all you got from that was a spelling tip, then I'm really sorry you missed the point. And look closely at that thread and see if I am indeed getting one, and notice when I stepped out, rather silently at that. Then save your language and labelling for someone else. Done.

sent from my HTC genisis using Tapatalk

 

[Maz]

No I didn't miss the point, I simply disagree with you. I believe I have that right?

You must have stepped out very quietly indeed because it's not at all apparent by the 12 posts you made there, some very complimentary about the 'unauthorised' atomisers too.

Anyway, I have no interest in fighting with you about this I don't care that much, so as you say. "Done".

 

[asdaq]

I must say I'm quite surprised to just see that you are from the UK I realize you aren't here trying to start a fight, just to have a good time, share input, and give advice and the such, right? I have no bone with you, and you every right to a differing opinion. As per your gracious request, here are more rights you have:

Copyright für Dummies

You'll have to look deeper about the mini, too. 12 posts isn't much for that thread plus there is the Croatian forum too.

Happy regging!

 

[Maz]

I thought this was finished.

You'll have to look deeper about the mini, too. 12 posts isn't much for that thread plus there is the Croatian forum too.

It's the Croatian forum I'm talking about, 12 posts all looking like you're interested to me.

Regging? Mind defining that for me?

And what's the point in that link? Where is its relevance to my opinion on steel mesh wicks not belonging to Raidy exclusively? You obviously think I'm stupid so you won't mind spelling it out for me in great detail I'm sure.

If there were any rights there then there have been enough 'infringements' by now that some legal action would have been taken surely? All I've ever seen on the matter is threat and lots of toys being thrown out of cots, no action. It just further affirms my belief this is hot air and arguing the toss for the fun of it isn't really my kinda thing so please, show me something solid backing up these 'rights' and I'll concede.

Otherwise we can just let this die?

 

[asdaq]

Registering, i.e. regged, regging. You need to be registered there to read it. If you would then you wouldn't be asking me anymore. And I'm not talking down to you, that is the title of the thread, written by raidy himself and quite explanatory.

 

[Maz]

Odd, I didn't have to register the link took me straight to it. Anyway, this is over as far as I'm concerned we wont agree and neither of us is likely to budge from our position so it's utterly pointless and I've got better things to be doing. As I am sure, have you.

 

[UA72Riddle]

Yeh Turbo remember when all this first started with the Hybrid Genisis minis here in the US. i dont remember the actual amount of Genisis that were made and sold in kit form but i think about 50. correct me if i am wrong. That number sure has grown with all the CO-OPS. and by Dan doing most of these we are all getting a good quality Genisis that will last forever. all we have to do ius change mesh and Kanthal. No more ordering of atties. Makes me want to cry lolol.

I would really like to see an updated version of the Hybrid Mini....where the button isn't as much of an issue. But I would also like to find another original.....since I modded mine.

 

[Wingapo]

I'd like to see an in depth discussion of the BFG of DOOM, you know for us bottom feeders.

 

[kcos]

Well it's awesome, and it's awesome as a dripper atty as well. When I use it for dripping I can put like 10 drops in there. When you use it on your Reo you don't want to get it to wet and it wicks and works great.

 

[Scubabatdan]

Well I finally got around to polishing the G-Tank-US, I started with 400 grit sand paper, and finished with 4000 grit sand paper, the results are very nice!

Dan

 

[perlionsmitnick]

Well I finally got around to polishing the G-Tank-US, I started with 400 grit sand paper, and finished with 4000 grit sand paper, the results are very nice!
View attachment 59886
Dan

Looks nice Dan. I was reading up on turning SS and it was saying that it turns 'gummy' while turning. I guess it is so hard that the bit pushes the metal around. That turned out really nice though.

 

[ainako]

I want mine unshined, or the same finish as my precisepluses if possible. Yea that Would look really nice.

Sent from my DROIDX using Tapatalk

 

[Wingapo]

I want what Kcos's got! Please make BFG's of DOOM.

 

[urquidezj]

Looks nice Dan. I was reading up on turning SS and it was saying that it turns 'gummy' while turning. I guess it is so hard that the bit pushes the metal around. That turned out really nice though.

It has to he cut slow to avoid the "gummyness" nice job on the polishing Dan.

 

[cyned]

Looks very nice, great Dan.
Cheers.

 

[bp400]

I'll take mine gold plated with diamond trim