Genesis Line - mini genesis

Status
Not open for further replies.

Dalton63841

Moved On
Feb 14, 2011
3,456
3,214
41
Maine
I have to be honest, this is a beautiful atty, but I worry about how quick that coil started glowing orange. In dealing with the scubagen I found that if it is wicking properly the coil shouldn't glow, and if you draw on it while the coil is glowing it makes the throat hit nearly unbearable.

I am not personally interested in the Line, because of the dimensions(seems like more of an eGo look), but I will be watching for the Maxi or Mini to see what I think...
 

Dalton63841

Moved On
Feb 14, 2011
3,456
3,214
41
Maine
This was torture test. Not the normal setup.
Video title is : Line- torture test.

VERY NICE! You have the Dalton63841 Seal of Approval. It's totally worthless, and won't get you laid, but you have it none the less. :lol:

Going to the Croatian forum to see if I can find specifics on the other 2 versions...
 

shpaolin

Unregistered Supplier
ECF Veteran
May 10, 2011
948
600
49
Zagreb , Croatia
www.vaporwall.com
FIRST REPORT BY MEDVED-TESTER



Line Genesis testing so far:

Using #400 SS mesh (cut to 35x23mm) and 0.20 Kanthal wire with four wraps proved to give the best results for me. The vapor production is massive even though it performs like a genesis atty. Compared to A2 which also produces clouds of vapor, Line isn't hindered with the lack of taste at all. Quite the contrary. The taste is great and TH is almost too hard for me (using the 12mg VPG liquid). I've considered lowering my nic levels to 9mg/ml.

Three wraps give even harder TH, I'd suggest this for hard-core vapers only. 5 wraps could be the sweet spot for me if I keep the juice at 12mg.

Liquids used so far:
VPG Desert Ship Blend
VPG Hypnotic Mist
VG Banana Nut Bread
VG Kentucky Blend
VPG Snickers.

All I can say is - the taste of vapor is simply terrific :D Also the liquid flow stays constant even with thicker VG liquids.

Line used on following mods:

eGo-T 900mah

But I must say... out of 3 eGos, it worked only on one of them. I wouldn't advise using the eGo batteries, because each setup is different and if the SS mesh is not thoroughly oxidized - they might short out on you. We've seen this happen with G-Tank also...

Alpha 14500 900mah

No problems whatsoever.

Devil's Marble 14500 900mah

No problems here either.

I tested it on two 18650 mods also, but having 12mg liquid inside and the fully charged battery's 4.2 volts kicks some serius TH. So I had to switch to 14500 which I use daily ;)

As this is the test sample, there's no "cork" on the liquid tank, only a 2mm hole for refilling. As I understand, this will be dealt with in the final version. Besides that obvious opening I have noticed no leaks from either 510 connector side or through tank windows.

Will do some more testing and keep you posted on results.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread