Genny Style Tank Choices

[garz]

I recently purchased an AGA T2. Not really impressed with it. Performs alright, but having to leave the fill hole unplugged and the leaking is just too frustrating. Also having to keep it at a certain angle when vaping isn't ideal either. Looking for a nice Genny style tank or any ss mesh tank system that doesn't really leak or has a plug but allows air to pass through it. Or even just a quick fix for the fill hole plug issue I'm having.

 

[EDO]

Plug the fill hole but make your wick thinner than the wick hole, so that air can get into the tank from there. I set up all my gennies this way and I never have leaking issues. I can shake my gennies upside down for an hour an not one drop will leak as long as the fill hole is plugged.

 

[garz]

and it wicks fine? Sometimes I get such dry hits doing that method. I use peter K method 3/32" drill bit.

 

[EDO]

Yes it wicks well for me....but I naturally tilt to horizontal when vaping and my juices are 80pg/20vg. I also set up using the Petark method with a 3/32 or 5/64 drill bit. There are posts here describing how to set up a genny using silica or nextel wicks....both of those wick and perform better than ss mesh. You could try them. Also try using 500 mesh if you haven't already. You might also try a upper tank genny like the Cyclone v2.

 

[TroyHoot]

roll a piece of mesh and put it in the fill hole. have to play with how tight you need it so you get air in but no fluid out. works fine for me.