- Status
FOR SALE
Gepetto Classic - Poplar Burl VV
It`s a VV box mod made of Poplar Burl-beautiful and very light wood
It runs on two AW IMR 18350 batteries
I`ve made the connector a bit recessed and now it`s sitting in a 22 mm diameter "well", to make the mod look more composed with any attie.
Box has got SS button and copper Battery contacts,
Box is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Specifications for electronic components
HPv1
Single button operated, PV-esque menu. 3-6v regulation in 0.1v increments (ye, I know - no VW, but chill for now ), 7A limit, should be able to deal with 1 ohm coils (as long as you use proper batteries), it shows battery voltage under load and w/o load.
Menu : 5 clicks to get into the menu and later :
P^ - voltage up
P_ - voltage down
Lc - button lock
Hr - resistance check (yes !
)
HL - setting your cut off time (2 to 20s)
AL - setting automatic button lock (from 1 min to 9 min, can be turned off)
CU - setting how low the device should drain your batteries (you can set the minimal voltage on a pair of batteries from 5.4 to 6v, in 0.1v increments)
Price: 195$ with Shipping and PP fees
PayPal Only
Gepetto Classic - Poplar Burl VV
It`s a VV box mod made of Poplar Burl-beautiful and very light wood
It runs on two AW IMR 18350 batteries
I`ve made the connector a bit recessed and now it`s sitting in a 22 mm diameter "well", to make the mod look more composed with any attie.
Box has got SS button and copper Battery contacts,
Box is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Specifications for electronic components
HPv1
Single button operated, PV-esque menu. 3-6v regulation in 0.1v increments (ye, I know - no VW, but chill for now ), 7A limit, should be able to deal with 1 ohm coils (as long as you use proper batteries), it shows battery voltage under load and w/o load.
Menu : 5 clicks to get into the menu and later :
P^ - voltage up
P_ - voltage down
Lc - button lock
Hr - resistance check (yes !
) HL - setting your cut off time (2 to 20s)
AL - setting automatic button lock (from 1 min to 9 min, can be turned off)
CU - setting how low the device should drain your batteries (you can set the minimal voltage on a pair of batteries from 5.4 to 6v, in 0.1v increments)
Price: 195$ with Shipping and PP fees
PayPal Only
FOR SALE
Gepetto Art - "Poker Face" VV
It`s a VV box mod made of Birch wood
It runs on two AW IMR 18350 batteries
I`ve made the connector a bit recessed and now it`s sitting in a 22 mm diameter "well", to make the mod look more composed with any attie.
Box has got SS button and copper Battery contacts,
Box is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Specifications for electronic components
HPv1
Single button operated, PV-esque menu. 3-6v regulation in 0.1v increments (ye, I know - no VW, but chill for now ), 7A limit, should be able to deal with 1 ohm coils (as long as you use proper batteries), it shows battery voltage under load and w/o load.
Menu : 5 clicks to get into the menu and later :
P^ - voltage up
P_ - voltage down
Lc - button lock
Hr - resistance check (yes ! )
HL - setting your cut off time (2 to 20s)
AL - setting automatic button lock (from 1 min to 9 min, can be turned off)
CU - setting how low the device should drain your batteries (you can set the minimal voltage on a pair of batteries from 5.4 to 6v, in 0.1v increments)
Price: 195$ with Shipping and PP fees
PayPal Only
Gepetto Art - "Poker Face" VV
It`s a VV box mod made of Birch wood
It runs on two AW IMR 18350 batteries
I`ve made the connector a bit recessed and now it`s sitting in a 22 mm diameter "well", to make the mod look more composed with any attie.
Box has got SS button and copper Battery contacts,
Box is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Specifications for electronic components
HPv1
Single button operated, PV-esque menu. 3-6v regulation in 0.1v increments (ye, I know - no VW, but chill for now ), 7A limit, should be able to deal with 1 ohm coils (as long as you use proper batteries), it shows battery voltage under load and w/o load.
Menu : 5 clicks to get into the menu and later :
P^ - voltage up
P_ - voltage down
Lc - button lock
Hr - resistance check (yes !
) HL - setting your cut off time (2 to 20s)
AL - setting automatic button lock (from 1 min to 9 min, can be turned off)
CU - setting how low the device should drain your batteries (you can set the minimal voltage on a pair of batteries from 5.4 to 6v, in 0.1v increments)
Price: 195$ with Shipping and PP fees
PayPal Only
Gepetto - tuBBy #003 + GP Tank
It is made of American Wallnut and has a Stainless Steel button . It comes with a recessed 510 connector so that all your atties can sit flush. It takes one 18500/18490 battery and has brass contacts to improve conductivity.
GP tank is a carto tank for Soft tip standard cartos , has got a SS caps
Mod is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Price: 150$ with Shipping and PP fees
PayPal Only
It is made of American Wallnut and has a Stainless Steel button . It comes with a recessed 510 connector so that all your atties can sit flush. It takes one 18500/18490 battery and has brass contacts to improve conductivity.
GP tank is a carto tank for Soft tip standard cartos , has got a SS caps
Mod is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Price: 150$ with Shipping and PP fees
PayPal Only
Gepetto - tuBBy #001 mini
It is made of American Wallnut and has a Stainless Steel button . It comes with a recessed 510 connector so that all your atties can sit flush. It takes one 18350 battery and has brass contacts to improve conductivity.
Mod is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Price: 125$ with Shipping and PP fees
PayPal Only
It is made of American Wallnut and has a Stainless Steel button . It comes with a recessed 510 connector so that all your atties can sit flush. It takes one 18350 battery and has brass contacts to improve conductivity.
Mod is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Price: 125$ with Shipping and PP fees
PayPal Only
FOR SALE
Gepetto Classic VV - Fir Tree Burl
It`s a VV box mod made of Fir tree burl
It runs on two AW IMR 18350 batteries
I`ve made the connector a bit recessed and now it`s sitting in a 22 mm diameter "well", to make the mod look more composed with any attie.
Box has got SS button and copper Battery contacts,
Box is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Specifications for electronic components
HPv1
Single button operated, PV-esque menu. 3-6v regulation in 0.1v increments (ye, I know - no VW, but chill for now ), 7A limit, should be able to deal with 1 ohm coils (as long as you use proper batteries), it shows battery voltage under load and w/o load.
Menu : 5 clicks to get into the menu and later :
P^ - voltage up
P_ - voltage down
Lc - button lock
Hr - resistance check (yes ! )
HL - setting your cut off time (2 to 20s)
AL - setting automatic button lock (from 1 min to 9 min, can be turned off)
CU - setting how low the device should drain your batteries (you can set the minimal voltage on a pair of batteries from 5.4 to 6v, in 0.1v increments)
Price: 165$ with Shipping and PP fees
PayPal Only
Gepetto Classic VV - Fir Tree Burl
It`s a VV box mod made of Fir tree burl
It runs on two AW IMR 18350 batteries
I`ve made the connector a bit recessed and now it`s sitting in a 22 mm diameter "well", to make the mod look more composed with any attie.
Box has got SS button and copper Battery contacts,
Box is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Specifications for electronic components
HPv1
Single button operated, PV-esque menu. 3-6v regulation in 0.1v increments (ye, I know - no VW, but chill for now ), 7A limit, should be able to deal with 1 ohm coils (as long as you use proper batteries), it shows battery voltage under load and w/o load.
Menu : 5 clicks to get into the menu and later :
P^ - voltage up
P_ - voltage down
Lc - button lock
Hr - resistance check (yes !
)HL - setting your cut off time (2 to 20s)
AL - setting automatic button lock (from 1 min to 9 min, can be turned off)
CU - setting how low the device should drain your batteries (you can set the minimal voltage on a pair of batteries from 5.4 to 6v, in 0.1v increments)
Price: 165$ with Shipping and PP fees
PayPal Only
FOR SALE
Gepetto - tuBBy #004
It is made of American Wallnut and has a Stainless Steel button . It comes with a recessed 510 connector so that all your atties can sit flush. It takes one 18490/18500 battery and has brass contacts to improve conductivity.
Mod is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Price: 120$ with Shipping and PP fees
PayPal Only
Gepetto - tuBBy #004
It is made of American Wallnut and has a Stainless Steel button . It comes with a recessed 510 connector so that all your atties can sit flush. It takes one 18490/18500 battery and has brass contacts to improve conductivity.
Mod is coated natural wax
The wax protects the wood and makes it resistant to elements while making it more comfortable to hold. It will need to be wiped with a cotton cloth from time to time and it would be good to apply some wax on it once a month or so
Price: 120$ with Shipping and PP fees
PayPal Only
I've been browsing this thread and am blown away by the craftsmanship of these mods. They are pure works of art. I would love to get my hands on one.
for now I don't take any pre-order , sorry
but today will be a tuBBy #002 mini with GP tank
- Status
Similar threads
