GG Talk!

[dspin]

O-Rings
Fuse Upgrade
Replacement Connector Insides (you will thank me for this one someday)
extra fuse replacement springs
replacement button springs
Someday - get an extra axis plastic - probably will never need one but you never know.

Thanks Mosh that helps alot! I can't get the delrin piece off to get that second o ring in there.(I don't want to wreck it!) I also think one was in pieces in the bottom of the body. I hope it will ok that way.

@ez I did tighten the firing pin.... new battery, using ody, and coil is good, just switched to ggts base. Will do some more playing with it. I hope it isn't the o ring thing giving me troubles.

I will be ordering spares just in case that is the problem.

Sge- sometimes that delrin piece will not come off the firing pin without pliers or destroying it. Hence the reason I listed it above to have a spare for. Sometimes people even bend their firing pin. The replacement connector insides has a new pin, new o-rings, the delrin piece, etc. ready to go in the event of a disaster like you have. For around 18.00 you cant go wrong getting one. Having extra O-rings too then allows you to throw on that replacement connector and replace the o-rings at your leisure.


Contact Bruce right away to see if he has any extra little O-rings he can send you. I would send you some but have given mine away to other people who had none. Sorry buddy. I too await more O-rings. If Bruce has none I would suggest you post a cry for help for some on the GG forum. Someone there will help you.


Also adjust your button with the post with no batts in it so you can look down in tube to see exactly where its at. Takes some fiddling but we are all very lucky to have adjustable buttons back. The fixed throw ones were not on the top of my list.

 

[supervape]

Sorry if this has been asked but does the ssggts that was just sent out by COV come with the collector tank or is that optional pre-order?

 

[kwalka]

Sorry if this has been asked but does the ssggts that was just sent out by COV come with the collector tank or is that optional pre-order?

Yes sir.......

 

[supervape]

Thanks Ken, so no need to buy that great... I want a brass tele though

 

[kwalka]

Yes, I saw that in the classys. I pre-ordered enough to make 1 TS half brass. I have 3 so the brass one will be for the house.

 

[katester]

Just received my GGTS!! This is my first GG anything and I know I'm going to need some help as I get started. Is this the best place to ask questions? Or is there another thread for GG newbie questions?

My first concern is that the GGTS is much bigger than I expected... Is there any way to covert it to a 18350 mod? If so, what parts would I need to find?

 

[Ezkill]

18350 = bottom tube + stealth cap.

 

[katester]

18350 = bottom tube + stealth cap.

Thanks for the reply! So, if I have the GGTS, all I need to find is a stealth cap?

 

[springfieldarms]

It'll be a bit bigger than with stealth cap but you can just take the top tube off and screw the collector tank onto the telescope while it's down. Mine fits an 18350 perfectly.

 

[snork]

Just received my GGTS!! This is my first GG anything and I know I'm going to need some help as I get started. Is this the best place to ask questions? Or is there another thread for GG newbie questions?

My first concern is that the GGTS is much bigger than I expected... Is there any way to covert it to a 18350 mod? If so, what parts would I need to find?

And you don't even need the stealth cap to make it much smaller and use an 18350. Take off the control tank, take off the top tube, and thread your control tank directly on the telescope.

Yeah, what springfieldarms said.

 

[the ob]

I was going to ask, what are the ways to make it work with a 18350? Is there more than one combination?

what about a 14500?

I like small

 

[c8h10n4o2x2]

Here you go, check the pictures under Batteries
http://ggwiki.et.com.mx/index.php/GGTS

 

[springfieldarms]

And you don't even need the stealth cap to make it much smaller and use an 18350. Take off the control tank, take off the top tube, and thread your control tank directly on the telescope.

Yeah, what springfieldarms said.

Nice tip ya got there snork ;-)

 

[erich]

Nice tip ya got there snork ;-)

He HAD to make it shorter... it's a 2ft. tip.

 

[snork]

That's right, otherwise I'd poke out my eye.

 

[Jagellpuff]

Received my SSGGTS yesterday, got it setup with my Ody today and she be vaping!!!

Thank you Imeo and Bruce!! I have waited since December to get one and now it's mine!!!!


Jeff "Jagellpuff" via iPhone using Tapatalk

 

[jslick_007]

This is so awesome that a bunch of folks are getting to try their hand at GGTS and it's infinite capabilities. For anyone that has problems, the GG community is awesome and I would suggest spending some time in the GG sub forum as there are a lot of tips and most importantly a bunch of helpful people. The support of the GG products provided is second to none. SGE, PM me, I have extra little o-rings if Bruce can't help you out.

 

[supervape]

What numbers are these current ones? Just curious

On Tapatalk via my Mobile

 

[JthaBigVapor]

SO EVERYONE KNOWS!!!!

The advanced order date is confirmed to end on the 25th of THIS MONTH.

 

[Jagellpuff]

SO EVERYONE KNOWS!!!!

The advanced order date is confirmed to end on the 25th of THIS MONTH.

Thank you!! Does this mean 11:59pm EST?


Jeff "Jagellpuff" via iPhone using Tapatalk