ok so I just tried hitting it and it got SUPER HOT and smelled strange.. the BASE got super hot not the ODy.. any help would be appreciated!
GG Talk!
- Thread starter Bigbuyer
- Start date
- th_trl_thread_readers 0
- Status
You have a short.
Do your adapters have rubber pieces in them or are they all metal.
If the base of the GGTS is getting hot it's a problem.
Do your adapters have rubber pieces in them or are they all metal.
If the base of the GGTS is getting hot it's a problem.
yea down by the switch assembly got super hot...they have rubber pieces in them..
Then there is your problem. The adapters with rubber pieces have caused shorts for a lot of people. The GGTS makes solid connections and puts a lot of pressure on the adapters with rubber/silicone causing them to short at times.
If you're going to use adapters buy a few metal ones and save yourself a lot of grief, burned springs and possibly other much worse battery problems.
I posted in the forum here with a bunch of links to adapters. There is also a link to pictures on the GGWIKI site done by Ariel_MX which has pictures of how all the adapters work out in a GGTS. All those adapters are metal.
If you're going to use adapters buy a few metal ones and save yourself a lot of grief, burned springs and possibly other much worse battery problems.
I posted in the forum here with a bunch of links to adapters. There is also a link to pictures on the GGWIKI site done by Ariel_MX which has pictures of how all the adapters work out in a GGTS. All those adapters are metal.
Yeah bad adapter fried my battery spring. They just came back into stock though!
K got it to work. thanks for the help.. I have a .8 ohm coil until I can get new batteries for 6v
On Tapatalk via my Mobile
On Tapatalk via my Mobile
What's is this extra brass pin that comes with it for? That for the switch?
EDIT: ADDED PHOTO
Here is my little new friend
On Tapatalk via my Mobile
EDIT: ADDED PHOTO
Here is my little new friend
On Tapatalk via my Mobile
Last edited:
What exactly is the benifit of reaching for the extreme limits of a chemical power source? I know your dentist is hoping you goof up and exceed it. The FDA wouldn't mind either me thinks. The rest of us are hoping you don't become another negitive news story about how dangerious Vaping is.
Guys as an update, we have more engraved tubes coming in, when we get them in we will send them to you with a return envelope for the scratched tubes.
Should be a week or two
Should be a week or two
Bruce or Justin,
If you happen to see this can you point me towards some low resistance atomizers on your site that will work in a UFS V2 WITHOUT a mouth piece. They have to be the length of a standard boge carto 1 3/8" I believe in order to come out of the top. Yes yes, I have the extension for regular sized atties but it still leaves it too short to fit your own drop tip.
I'm sure you guys carry some atomizer 1 3/8" or longer but I can't tell from the site.
If you happen to see this can you point me towards some low resistance atomizers on your site that will work in a UFS V2 WITHOUT a mouth piece. They have to be the length of a standard boge carto 1 3/8" I believe in order to come out of the top. Yes yes, I have the extension for regular sized atties but it still leaves it too short to fit your own drop tip.
I'm sure you guys carry some atomizer 1 3/8" or longer but I can't tell from the site.
what exactly am I doing wrong? i have one single battery 3.7v with a lr coil.. Can you explain? And I doubt I would go to the news place LOL also was not reaching for any extreme limits, I made a coil it was .8 was not trying to get that low it just happened so I used it....
On Tapatalk via my Mobile
Is that voltage by ohms = watts or? also instead of the other guy being that way about it could have been a little nicer about it cause obviously I did not know it was to low.. Could have politely told me instead.
On Tapatalk via my Mobile
On Tapatalk via my Mobile
The green area is where you need to stay for the most part. The left side is your Ω or coil resistance. The top is the Voltage that you are applying to the coil and the #s in the middle are the result of all the diff combinations. I will post the whole chart
Hey thanks.. I knew the top and side numbers but didn't know what the calculation in the graph meant thanks...
On Tapatalk via my Mobile
On Tapatalk via my Mobile
He is only concerned for your well being and thought you were looking into stacking batteries as Bishop has been displaying in his videos.
Your low res coil at 3.7 v is fine super. Bishop is doing low res at 3.7 stacked = 7.4v
Your low res coil at 3.7 v is fine super. Bishop is doing low res at 3.7 stacked = 7.4v
- Status
Similar threads
- Locked
