Ripp has been hacked guys. Even on the GG subforum he appeared to say some weird stuff. It's not really Ripp but some hacker
GG Talk!
- Thread starter Bigbuyer
- Start date
- th_trl_thread_readers 0
- Status
UK forum was down for a few days due to hackers. It was unknown if they got any login information. People who visited there may have been easy targets. Just a thought.
That's what they said...it was unknown if they did get anyone's login info. But just to be safe I changed mine in all forums.
I need some help please. I need a 510 adapter to fit my GG. I have an Oddy drip-mode. Here's my dilemma:
When I use my drip oddy, I lose my adjustable draw. All the adapters I see all have small venting notches at the top. So when I use my oddy, the air pulls through those notches rather than my adjustable draw. I've tried taking the o-rings off of broken drip-tips, and sliding them up against the base of the oddy, but they don't stay tight. I brought this up in another thread, someone posted a pic of their adapter, it had no notches at the top, and it even had a hole 3/4 of the way down on the side, so it'd get air from the GG collection tank! but he failed to respond when I asked where he got it.
. But that's what I need. I'm actually shocked that I haven't heard someone bring this up before. But what do you guys use? The adjustable draw is one of the main reasons I love my gg, how can I keep this and be able to use my oddy drip mode?
When I use my drip oddy, I lose my adjustable draw. All the adapters I see all have small venting notches at the top. So when I use my oddy, the air pulls through those notches rather than my adjustable draw. I've tried taking the o-rings off of broken drip-tips, and sliding them up against the base of the oddy, but they don't stay tight. I brought this up in another thread, someone posted a pic of their adapter, it had no notches at the top, and it even had a hole 3/4 of the way down on the side, so it'd get air from the GG collection tank! but he failed to respond when I asked where he got it.
. But that's what I need. I'm actually shocked that I haven't heard someone bring this up before. But what do you guys use? The adjustable draw is one of the main reasons I love my gg, how can I keep this and be able to use my oddy drip mode?
I got a 2nd hand UFSv2 and a short mode mouthpiece. You can use Ody inside of UFS instead of atty and get best of both worlds.
Yes you can use the dripmode base with the rebuildable part and the short mode mouth piece in the ufs. But for sure the experts will chime in with a better explanation but it can be done.
Instead of a normal atty, you setup UFS+2 extension rings, then drip mode base+rebuildable assembly+small mode mouthpiece.
It's easy peasy really. I am kinda new at this and it works like a dream. It's good cause I can use them together or separate depending on what I feel like doing.
I need some help please. I need a 510 adapter to fit my GG. I have an Oddy drip-mode. Here's my dilemma:
When I use my drip oddy, I lose my adjustable draw. All the adapters I see all have small venting notches at the top. So when I use my oddy, the air pulls through those notches rather than my adjustable draw. I've tried taking the o-rings off of broken drip-tips, and sliding them up against the base of the oddy, but they don't stay tight. I brought this up in another thread, someone posted a pic of their adapter, it had no notches at the top, and it even had a hole 3/4 of the way down on the side, so it'd get air from the GG collection tank! but he failed to respond when I asked where he got it.
Replace the GGTS 510 connector with a UFS 510 connector, remove the compression nut from inside of the GGTS collector tank cap, it will fit over the UFS 510 connection. Attach your Ody, adjust the tank cap until its snug on the base and the Ody will be air tight, your AC ring will have %100 air control.
I hope this is clear, and it helps.
Thanks so much for responding! I thought my question would get lost among threads again. Where can I get a UFS to 510 adapter? COV has this: GG UFS 510 Extension
Is that it? thanks SO MUCH!
Thanks so much for responding! I thought my question would get lost among threads again. Where can I get a UFS to 510 adapter? COV has this: GG UFS 510 Extension
Is that it? thanks SO MUCH!
Not quite- If you don't have a UFS already, this is what you are looking for- UFS Connector - No Insides
The complete connectors are out of stock, so you will need the insides as well- UFS Connector Insides
Fright88, who kindly clued me in on this, has some pics of the setup in this thread(post #613)- http://www.e-cigarette-forum.com/forum/gg/246680-things-i-have-make-my-customers-21.html#post5907767
And I do too- in the post right below the above linked one. If you find it not sealing enough, loosen the draw control cap a bit until it is snug against the drip mode base, as Poppa said
It's working great for me, hope this helps.
Last edited:
Not that I know of..perhaps if you had another mod that the UFS 510 connector would thread onto...but I've never had to try and find one.
You'd still need the GGTS control tank assembly and cap, too, for draw control
Bruce, any idea on the GGTB tubes? I know Imeo said they were being polished etc about 3 weeks ago.
Same parts (ufs connector, GGTS collector tank and draw controll cap) paired with a ufs 510 adapter will work but you may have to trim the pin. Although since the Ody pin is adjustable you houldnt have to
Hey Bruce, any word on when the GGPP will be reaching our shores? Include with that the GGTS and Oddy, I got A huge desire to send money to COV!!!
Thanks!
(FYI- placed an order today for more goodies from you, thanks for the great CS!)
Jeff "Jagellpuff" via iPhone using Tapatalk
Thanks!
(FYI- placed an order today for more goodies from you, thanks for the great CS!)
Jeff "Jagellpuff" via iPhone using Tapatalk
Not quite- If you don't have a UFS already, this is what you are looking for- UFS Connector - No Insides
The complete connectors are out of stock, so you will need the insides as well- UFS Connector Insides
Fright88, who kindly clued me in on this, has some pics of the setup in this thread(post #613)- http://www.e-cigarette-forum.com/forum/gg/246680-things-i-have-make-my-customers-21.html#post5907767
And I do too- in the post right below the above linked one. If you find it not sealing enough, loosen the draw control cap a bit until it is snug against the drip mode base, as Poppa said
Thank you SO much! I'm so happy to get an answer that will work. I'm doing the order today.
- Status
Similar threads
- Locked
