Will US seller sell tilemahos v2 ???
a few days ago i got a P4 mini from ESG but can't get tilemahos v2 22mm because of my thin wallet lol
I got a salary fee today ...
there is no USA seller UT but there will be soon
GG Tilemahos V2 and Penelope V4 mini official thread
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
there is no USA seller UT but there will be soon
There are no GG pieces that need replaced because I used a plastic/delrin drip tip it was the weak link in the chain so to say and snapped off which in hindsight was very lucky for me. I know I have read one of your post about o-ring size for Tilemahos V2 just don't have one I will make due until I find a replacement drip tip and of course I am waiting for the GG drip tips to come out soon I hope.Thanks Adam
I do have 6 drip tips but they spin and yes they are all different but haven't had to worry about it until now lol
Just saying I have many drippers and a few tanks but have not reviewed them well to be honest they suck I wont even give them away to friends it may discourage them from vaping and I don't want that.
Last edited:
if you buy something and you dont like it then you dont have to review it Adam, so you do the right thing. You have to review something only when it is send to you for review.
Are you sure that you dont need any replacements?
Are you sure that you dont need any replacements?
Hi imeo
I have an gg4s and an tilemahos v2 and i really Love this Setup.
Today i have installed the clear tank and i have noticed that there are only coming bubbles from one of the channels.
Does that mean that the liquid is only floating from the one side to the cotton/coil?
And my Second question: how wide should i Open the liquidcontrol?
Greetings
I have an gg4s and an tilemahos v2 and i really Love this Setup.
Today i have installed the clear tank and i have noticed that there are only coming bubbles from one of the channels.
Does that mean that the liquid is only floating from the one side to the cotton/coil?
And my Second question: how wide should i Open the liquidcontrol?
Greetings
Yes thank you there isn't anything to replace the drip tip was from an old rda I had in the discard bin but thanks for the concern. If I only reviewed what was sent to me then I would not have anything accept GG4S to review hmm I guess all my reviews are biased I only review what is good quality well built easy to use and well supported and works the way it is supposed to. I think GG has always done this and more for me so all is good.
thank you Adam
Your reviews are not biased, they are reviews of a person that likes what he reviews and he reviews what he likes. You are not "less" reviewer than others out there, no worries about this at all. Maybe you are way more professional by reviewing only serious products and not just "everything", especially clones! Also, your reviews are really deep and shows exactly what is inside an atomizer and how this works
Ah, one more thing about the qualifications of the "serious reviewer". He doesnt review clones. Thats unacceptable
Your reviews are not biased, they are reviews of a person that likes what he reviews and he reviews what he likes. You are not "less" reviewer than others out there, no worries about this at all. Maybe you are way more professional by reviewing only serious products and not just "everything", especially clones! Also, your reviews are really deep and shows exactly what is inside an atomizer and how this works
Ah, one more thing about the qualifications of the "serious reviewer". He doesnt review clones. Thats unacceptable
Last edited:
not al all Sn, both sides are feeded. But maybe the wick on one side is longer or shorter, so liquid prefers a little more the one side.
Liquid control have to be opened until you feel comfortable with your vape. GG atomizers dont have a specific vape. You can adjust it as you like until you find your sweet spot. Only be careful to not open it a lot and overflood the atomizer. You will understand this because you will have a lot of gurgling.
Welcome to GG family buddy
Last edited:
My P4VM's came in this morning (2 day shipping from Italy to US) and I cleaned mine and coiled it up.
Compared to my Tilemahos the draw is only slightly tighter, but it's very pleasurable. I can't believe how much e-liquid the P4VM can hold!
Fantastic job, Imeo.
Now all I need is something to attach below it.
Compared to my Tilemahos the draw is only slightly tighter, but it's very pleasurable. I can't believe how much e-liquid the P4VM can hold!
Fantastic job, Imeo.
Now all I need is something to attach below it.
Before clear windows we find our vape by régulate juice contrôle it's the same with it
Imeo engraving Wing on the mouthpiece with the clear tank
Imeo engraving Wing on the mouthpiece with the clear tank
Last edited:
I wish to use silica in my new Tilemahos V2. This morning I built my first coil, a 1 ohm coil around 3mm silica. I made the determination that performance was only fair, I believe the silica was too big.
So instead of winging it with trial and error, I thought I'd ask about anybody's success stories with silica in their builds. I'd prefer to stay around 1 ohm.
Thank you.
So instead of winging it with trial and error, I thought I'd ask about anybody's success stories with silica in their builds. I'd prefer to stay around 1 ohm.
Thank you.
Best build ever.
Two equal pieces of 2mm silica wick wrapped with .25mm (30G) titanium wire... six wraps is making exactly 1ohm... going down just a little in the two channels.
My all day build
Got my two Penelope's V4 this morning from Gino. Absolute happy, perfect draw; was at first s bit sceptical about the airflow. But everything ok, better then V3. Only one thing is missing...Proteus. Will be a perfect combi...Meanwhile they sit on Telegonos's
I am very glad to hear that Blue. I am really proud of you, congratulations buddy
And I even have all of that. Thanks, I'll try it this afternoon.Best build ever.
Two equal pieces of 2mm silica wick wrapped with .25mm (30G) titanium wire... six wraps is making exactly 1ohm... going down just a little in the two channels.
My all day build
hi
would this build also work on the tilemahos?
or wont the liquid get up that much/high?
or will the base be completly floated?
the build is shown in this video
https://www.youtube.com/watch?v=FXpaCa2o9DE
thx for answering
would this build also work on the tilemahos?
or wont the liquid get up that much/high?
or will the base be completly floated?
the build is shown in this video
https://www.youtube.com/watch?v=FXpaCa2o9DE
thx for answering
- Status
