GG Tilemahos V2 and Penelope V4 mini official thread

[imeothanasis]

The Tilemahos V2 22mm rta: http://youtu.be/b2X4BdkCg6k

Well here is the second attempt at a review still not happy with my camera work but it is what it is hope it helps!

Adam, I missed your review about Tilemahos V2! I am really sorry buddy.

Ok, thats what I was talking about when I said that we need reviewers that do deep reviews on a product and thats exactly what you did. You mention everything about Tilemahos's features!!

And that was one more great review buddy. Thank you very much for this

ps.....I always totally understand what you say. Your language is just perfect for foreigners. You speak very clear and slow enough for me!

 

[AdamAnd]

Adam, I missed your review about Tilemahos V2! I am really sorry buddy.

Ok, thats what I was talking about when I said that we need reviewers that do deep reviews on a product and thats exactly what you did. You mention everything about Tilemahos's features!!

And that was one more great review buddy. Thank you very much for this



ps.....I always totally understand what you say. Your language is just perfect for foreigners. You speak very clear and slow enough for me!

Great Thank You for the kind words. It is easy sharing info on a product that works so well the clear window and sealed 510 the best!

 

[Klepto]

http://youtu.be/eqSbmtJA848

Just uploaded a video on a quick build and wicking technique I use on the Tilemahos V2 22mm this technique works on V1 or V2 and is my favorite to date.

Hi Adam

Thanks for the videos, i found them very informative, did pick up a few tricks
You say in the vid, that you use 26gauge, 5 wraps around a 2.5mm. I tried that and that gave me way to low ohm. Did i hear it wrong? or did you use 28gauge?

Thanks again for great videos

Cheers
klepto

 

[AdamAnd]

Hi Adam

Thanks for the videos, i found them very informative, did pick up a few tricks
You say in the vid, that you use 26gauge, 5 wraps around a 2.5mm. I tried that and that gave me way to low ohm. Did i hear it wrong? or did you use 28gauge?

Thanks again for great videos



Cheers
klepto

Wow yes i use 26g kanthal A1 round wire around a 2.3mm or 3/32 punch down tool and it always ends up around .6 or .7 ohms I have run out of titanium wire until i get some more i am using kanthal.

 

[dems86]

Just added a couple mouthpieces to my preorder, that was one thing I liked about the original, JC/chamber/chimney/DT all one singular piece. I'm definitely going to snag a couple of those GG DTs when they go up, but I'm happy I can rock the v2 just like the original now with the new mouthpiece

 

[calinbotez]

After two days of exclusive using, I found Tilemahos v2 excellent! It seems it is more forgiving than KFL + regarding wicking; I had zero dry hits from Tily, although in two days I changed the coils and the wicks many, many times (just for experimenting). I tried japanese cotton, bio cotton from ESG and rayon. All work, but I stay with japanese. I use only Titanium wire from ESG from now on, because it is cleaner (not so much gunk after heavy use). I had some problems with the juice control, because my drip tips slip when I want to turn the mouthpiece. Waiting for a GG drip tip, I found two workarounds on this problem:

1. Watching AdamAnd's video about Tily v2 (Vaping Canuck), I saw that he had the same problem and he unscrewed the top cap a bit. Well, brilliant idea! When you unscrew a tad the top cap, the big fat o ring that seals the space between top cap and mouthpiece loosens a bit, and then you can turn the drip tip and it doesn't slip anymore, making the juice control functional. Of course, at the end the top cap must be tightened.

2. Vasilis from ESG tought me another trick: removing the drip tip, placing a small bit of resistance wire into the mouthpiece, touching it's inner wall, and putting back the drip tip. The friction is much better now and the mouthpiece can be screwed.

P.S.: perhaps thicker o-rings for AC would be better; I find the AC ring turning too easy.

 

[imeothanasis]

great to hear that you are more than happy with your Tilemahos V2 cal

As for the AD ring: Thats why o-rings now are on base instead of the ring. Because you can put bigger o-rings and archive the result you like. The base now has 14x1 o-rings. Please put 15x1 and your AD ring will be tight. Or you can replace only the one of the o-rings with a 15x1, so your AD ring will be less tight than replacing both o-rings

 

[bones3]

Imeo will there be any tilemahos made with out AFC ?
Due to the fact that most of the mods you have released already have AFC. Already and I get a bit fed up buying stuff then having to buy more stuff to get them to be as they should!!!
Tis the reason I didn't go for any of the last lot you made!!

 

[soulseek]

Imeo will there be any tilemahos made with out AFC ?
Due to the fact that most of the mods you have released already have AFC. Already and I get a bit fed up buying stuff then having to buy more stuff to get them to be as they should!!!
Tis the reason I didn't go for any of the last lot you made!!

The market changes all the time just take a look at the competition. Have you seen the mess that's called Kayfun V4?

 

[imeothanasis]

I made a non AFC base for Tilemahos V2 bones, that was on preorder up to 3 days ago. Also Tilemahos V1 came in 2 versions. One with and one without AFC

 

[bones3]

Thanks for the reply Imeo

I was just wondering as I am after a 2nd Tilmahos for my esterigon as I wanted to get one with out. Having to change this and that so. To speak

 

[imeothanasis]

I also make a cap for esterigon without afc bones. So you can buy this cap and 1 Tilemahos with AFC

 

[JMBH]

I also make a cap for esterigon without afc bones. So you can buy this cap and 1 Tilemahos with AFC

Hi Imeo , when will this non AFC Esterigon cap be available ? Will it still be compatible for Esterigon VIR kit ?

 

[imeothanasis]

yes, it will be full compatible JM. Also this part was on preorders. I hope you got one

 

[JMBH]

yes, it will be full compatible JM. Also this part was on preorders. I hope you got one

OK, thanks Imeo . I didn't see or realized that that part was in preorder . I missed it then . Will it be soon available as spare ?

 

[imeothanasis]

sure JM. I will make much more than preorders, no worries

 

[JMBH]

sure JM. I will make much more than preorders, no worries

Thank you Imeo

 

[imeothanasis]

be well buddy

 

[calinbotez]

There is a lot of talk here about preorders. I buy from esmokeguru.com. I haven't seen there anything that gives me the ability to "preorder" something. Please enlighten me!

 

[monkkx]

There is a lot of talk here about preorders. I buy from esmokeguru.com. I haven't seen there anything that gives me the ability to "preorder" something. Please enlighten me!

For now, the best for you is to check the esmokeguru official thread on this forum, and subscribe to the notifications. They announce the list of items to be available and the dates items arrives on stock.