Nate, bite your tongue.
I don't want to know about refitting or fussing or none of that. No chipmunk on a smokey mountain for me, I just want to fill 'er up and gogo. lolGo-Go Specific: Thread for All things Go Go
- Thread starter Devonmoonshire
- Start date
- th_trl_thread_readers 0
- Status
Nate, bite your tongue.
I don't want to know about refitting or fussing or none of that. No chipmunk on a smokey mountain for me, I just want to fill 'er up and gogo. lol
Here's a newbie with Go-Gos as of this morning. I vaped all day and thought it was time to top the one I was using off. Well, I overfilled it. And, Yes, it's a harder draw if you overfill it. It does still work even flooded. I had to try filling a cart sooner or later, and I messed up. I'll be more conservative with the fluid the next time. So, other than my own errors, the Go-Go works great even flooded.
I love this go-go, filled up one carto so far and it has lasted me very long. The only thing I am going to have to get used to is knowing when to refill. I have only had the tank for my ego, besides dripping on a mega atty. I'm not going to lie, was very skeptical with the go-go before I tried it. Now that I have tried it though, I may only buy a box mod just to fulfill my curiousness. Just amazing.
If you fill it until a drop comes out the bottom and then just let it set on a paper towel for a couple of miutes you shouldn't have any problems.
Nate, bite your tongue.
LOL @ This one, I like it
I still love the chipmunk thing though I did use a syringe today to fill a very well dried Go Cart,(Cleaned it two days ago, taryn spun it with a piece of paper towel in the inhale end to catch moisture then set it to dry for 48 hours. I drew 2.2 ml into the syringe and slowly started the fillup process. I was able to get all the way down to .2 ml left in the syringe before it started dropping out of the bottom. then I set it on it's side and rolled it around a bit before cleaning it and placing the eGo-T Type A condoms on each end and will allow it to sit for a while today until later tonight and try to squeeze a couple more drops into it to top it off the rest of the way.Just Popped open a brand new Minty Menthol flavored Go Cart and am so happy with my choice of pre filled carts. That flavor is AWESOME!!!
To Tom10: Welcome to the Family once again and I am very pleased that you are happy with your purchase, I know for sure that I am thrilled to death with this thing
Happy Vaping Go Go Nation time to Go Go Get some sushi
Nate
Well I'm speechless about the gogo
Here is where you can get drip tips that fit the Go-cart. https://www.cignot.com/product_p/ego-dco-all.htm It is the drip tip for the mega cone atty and it fits perfect.
Holy Hanna Txtumbleweed!! You gotta quit sparking my Macgyver like Brain. I just used my dremmel to cut an original Type A Tank from the eGo-T in half and it fits the Go Go perfectly as well, I have found a use for my leaking tanks until my 801 whistletip cartos get here
Nate
so desperate to get a GO GO that i am almost ready to order one from cn-cigarette.com (China wholesaler)..it would be 49 bucks plus 10 dollars shipping, which would be airmail taking 10-20 days....
should i or shouldnt i?
i want to order from Drew at NHALER but they are out of stock and a few days ago he said 20 days before his shipment comes in. should i trust this China company?
should i or shouldnt i?
i want to order from Drew at NHALER but they are out of stock and a few days ago he said 20 days before his shipment comes in. should i trust this China company?
I personally am going to await the arrival in our USA Retailers myself, I have heard through the grapevine about some serious horror stories coming out of ordering tings of this nature from overseas. A lot of it is counterfeit and of very poor quality. I am sticking with NHaler or Cigeasy to purchase mine no matter how long it takes them to get em in.
Just my opinion on it tough;
Nate "Darth Vapor" Harris
I thought you ordered one about the same time I did. I know you were debating getting one when they first came out like I was. I'm just sorry I waited so long to get one because mine have worked great.
You are going to have a hard time finding one like we have from China, I researched them quite alot but never could find one with threads like ours.
Last edited:
I hadn't checked that cn site before and those might be the right ones but they say the Cartos are for vgo or Go-Go, I don't know if they would be interchangable with ours or not.
I have yet to clean one of these attys in a way that I find satisfactory. (Bear in mind, I'm looking for something almost as easy as using the Go-Go itself, not an overnight process). I've scoured the forums for ideas and two seemed to stand out.
The two that seem promising to me are steam cleaning and using an ultrasonic jewelry cleaner. I'm skeptical that steam will really get rid of the baked on gunk, so I've ordered an ultrasonic cleaner. My plan is to remove the 2 "filler" pieces, then clean the attys in a vodka bath, and let dry for a few hours, dry burn and prime.
Any thoughts or suggestions?
The two that seem promising to me are steam cleaning and using an ultrasonic jewelry cleaner. I'm skeptical that steam will really get rid of the baked on gunk, so I've ordered an ultrasonic cleaner. My plan is to remove the 2 "filler" pieces, then clean the attys in a vodka bath, and let dry for a few hours, dry burn and prime.
Any thoughts or suggestions?
You are on the right track here AP. I have found that the easiest cleaning is like you said (1) pull filler (2) rinse well with hot water (3) dry burn the coil (4) dry filler on towel (5) reinsert filler (6) GoGo.
The filler comes out perfect, the dry burn works just like on an atty...and I have taken to cutting some of the filler to reduce packing to better accommodate the thicker juices. And so far I have tossed the inner-most layer of filler wrap with no ill effects.
Get a IGO from Drew. All day battery, horizontal coil, awesome clouds of vapor, 3+ ml cartomizers and comes with soft5 whistle tips.
A way for me to kill off 200+ KR808D-1 CARTOMIZERS. i LOVE MINE. RIGHT UP THERE WITH MY go-go'S
OOOOHHHH!!!!!!! I got mine today and they do fit nicely!!! Got wriggle em in past the stop point on the carto they come with but still, They work great!!! And Even more TH now than with the rubber stopper that comes in the Go Carts. I am Happy
Nate AKA Darth Vapor
Due to this thread, I'm considering buying a Go-Go now (if I can find them in-stock). I do have one question though; how large are they? Say compared to a penstyle? I'm guessing they are wider but have no clue as to length. Didn't see that info on either supplier page. Thanks!
Ok, honestly I can't read all the posts, so the question is can you use reg or lr atties on the go go.
Hi there Kyaku, and welcome
If you click on my profile and go to my Photos you can see the size of them compared to the average "510" type model, or cigarette sized ones. They are considerably larger as they have much longer battery life. in the picture of my PV's you will see the 510 I have laying in front of the rest of my PV's which are the eGo-T's and the Go Go, the Go Go is the third from the left, just to the right of the blue one.I hope this helps you out.
Nate AKA “Darth Vapor”
Hello snails1023, as far as I know the Go Carts only come in one type. But the resistance on them as far as my experience has been is a very easy draw, I do not know for sure what the exact Ohms are on them.
Nate AKA “Darth Vapor”
- Status
Similar threads
