Best Whistle tip for a Go-Go? I got a drip tip, but I think I would like a whistle tip better. The only reason may be because I have a whistle tip on my Ego-T Type B. It was my first and only other one.
Thanks!
Thanks!
Go-Go Specific: Thread for All things Go Go
- Thread starter Devonmoonshire
- Start date
- th_trl_thread_readers 0
- Status
dmj4,
The tip of an 801 soft tip cartridge works best for a whistle tip on the Go-Carts. You can pick these up almost anywhere for a couple bucks. Also, for a round drip tip on the Go-Carts, you can use a Mega Ego Atty Type A .. they fit.
The tip of an 801 soft tip cartridge works best for a whistle tip on the Go-Carts. You can pick these up almost anywhere for a couple bucks. Also, for a round drip tip on the Go-Carts, you can use a Mega Ego Atty Type A .. they fit.
Mega Atty A drip tips work great.
Another tip:
I started with 7 carts. 2 died right away (no problem, I wanted to cut one open anyway) and the other 5 have been cleaning up nicely. However, I did notice after a few rinses, the cart material started to not hold liquid as well. In other words, after the initial fill, any top offs ran straight through. Here is what I did to fix the solution.
1. Cut a piece of the PTB material the size of a single square of the batting material.
2. Sandwich that between 2 squares of the original batting (1 from the aforementioned dead carts)
3. Leave the PTB sticking out on one side, just enouth to make the first wrap around the internal straw in the cart
4. Wrap the PTB around your donor straw followed by a tightly wrapping the sandwich of the bat,PTB,bat sandwich
I can do this with the batting completely dry. It fits snug, but not overly tight (tighter than the original though).
I think this works because the internal layer of PTB will wick well even if the batting is compressed to tightly.
I am able to get the same 80 to 100 drops in that I originally started with, an it seems to suspend in the cart better and provide a more consistent hit thorughout the remainder of the juice. It also tops off how you would expect it to.
Just my experience. YMMV.
Another tip:
I started with 7 carts. 2 died right away (no problem, I wanted to cut one open anyway) and the other 5 have been cleaning up nicely. However, I did notice after a few rinses, the cart material started to not hold liquid as well. In other words, after the initial fill, any top offs ran straight through. Here is what I did to fix the solution.
1. Cut a piece of the PTB material the size of a single square of the batting material.
2. Sandwich that between 2 squares of the original batting (1 from the aforementioned dead carts)
3. Leave the PTB sticking out on one side, just enouth to make the first wrap around the internal straw in the cart
4. Wrap the PTB around your donor straw followed by a tightly wrapping the sandwich of the bat,PTB,bat sandwich
I can do this with the batting completely dry. It fits snug, but not overly tight (tighter than the original though).
I think this works because the internal layer of PTB will wick well even if the batting is compressed to tightly.
I am able to get the same 80 to 100 drops in that I originally started with, an it seems to suspend in the cart better and provide a more consistent hit thorughout the remainder of the juice. It also tops off how you would expect it to.
Just my experience. YMMV.
So, I have gathered from other threads that PTB is 'paper tea bag' right? Do you just take an unused tea bag, dump the tea, and use that?
Or am I wayyyyy off the mark here....
Or am I wayyyyy off the mark here....
PTB = Pyramid Tea Bag. I believe the preferred brand is Lipton.
Hold your cursor over underlined acronyms and an explanation box should appear.
Hold your cursor over underlined acronyms and an explanation box should appear.
All my cartos are becoming a pita. Cleaned them, now they act full but I'm not getting the hit I used to.
I just rinse with water and let them sit and dry. I think at least a couple probably have clogged coils. Gonna have to go through this thread and find some instructions, have a seat and do a thorough cleaning on at least a couple guinea pigs. Once I find out if I can do a thorough cleaning without completely ruining them, I'll be brave enough to do them all.
I'm just gonna order some prefills to get me through until I can find the time to sit down and concentrate on them.
I just rinse with water and let them sit and dry. I think at least a couple probably have clogged coils. Gonna have to go through this thread and find some instructions, have a seat and do a thorough cleaning on at least a couple guinea pigs. Once I find out if I can do a thorough cleaning without completely ruining them, I'll be brave enough to do them all.
I'm just gonna order some prefills to get me through until I can find the time to sit down and concentrate on them.
stomkat, go here for a very good tutorial. http://www.e-cigarette-forum.com/forum/ego-type-models/188388-how-clean-rebuild-gogo-cartomizer.html
Thanks to mohawkx for his contributions.
While I'm here, anyone carrying Go-Go prefilled cartos have any specials running such as free shipping, etc?
There is a Go-Go in the classifieds right now .. see this post: http://www.e-cigarette-forum.com/fo.../194355-go-go-5v-mod-couple-other-things.html
I don't think cigeasy ever does coupons and the only one I know of for nhaler, you have to spend $75 .. code is save5 (you spend $75 you get a whopping 5% off ... whoo hoo [/sarcasm] )
It is my understanding that the "back any day now" refers to a much anticipated shipment of GO-GO kits and stuff from China. SSV2 said to keep checking the CigEasy sub-forum here as they will announce as soon as the shipment hits.
And unless one of our new vendors is doing so, I believe CigEasy is the only vendor that stocks the prefilled GO-GO cartos I saw BILLB had some prefilled Echo Cartos but no mention of prefilled GO-GO's.
Bill is selling stainless Go-gos for 59.00 with five cartos and an extra cone. http://www.e-cigarette-forum.com/fo...-gold-has-echo-e-cartomizers.html#post3371471
CigEasy it is then!
My "go to" flavor is Banana Fosters Coffee with cream from Mrs. T's Bakery. While I don't dislike the Ry4 flavor, has anyone tried their prefilled Coffee flavor? I like creamy coffee, so I'm wondering what the flavor is like before I order. If it's black coffee flavor I don't know that I would like it, and would just get the Ry4.
My "go to" flavor is Banana Fosters Coffee with cream from Mrs. T's Bakery. While I don't dislike the Ry4 flavor, has anyone tried their prefilled Coffee flavor? I like creamy coffee, so I'm wondering what the flavor is like before I order. If it's black coffee flavor I don't know that I would like it, and would just get the Ry4.
Couldn't wait for a reply, so I ordered both flavors. I'm covered either way now.
I found the GoGo kit for $22.70 at SHENZHEN KEBO TECHNOLOGY CO.,LTD. I have been emailing with Sunny Chen and have placed and order for a GoGo and a V4. I will let you know about quality, shipping time, etc.
Sunny is nice. What connection does the V4 use? Did you get the one with the voltage display and are those clear carts with filler or tanks?
The shipping is what's expensive but if you order several it is worth the trouble. Should have ordered an Echo too. lol
Last edited:
- Status
Similar threads
