i guess i will take a chance and order from CigEasy, even though i heard some negative things about the customer service. i was so hoping to order from NHALER....but i am desperate to get my GO GO!!!
Go-Go Specific: Thread for All things Go Go
- Thread starter Devonmoonshire
- Start date
- th_trl_thread_readers 0
- Status
I just recieved mine from Cigeasy yesterday. ordered late saturday, was shipped on Monday and recieved on Wednesday. so I would say that shipping is pretty fast.
I just get almost no flavor from either of the 2 juices that I have tried in it so far.
I just get almost no flavor from either of the 2 juices that I have tried in it so far.
I have heard some negative comments also but I do know a new customer was having problems after hours and cigeasy read it on here, called them and got the problem solved. That spoke alot to me. I also was surprised when they read on the forum that I was giving some of the members on here some 801 whistle tips for their Go-Go and sent me a note with my order commending me and gave me a couple of extra bottles of juice. That showed me that they do care and pay attention to the customers, there evidently are some communication problems but I'm sure they are working on improving that aspect.
They have started taking orders!
Ok maybe not..I saw IN STOCK on the home page...but out of stock in my cart. I'm sure it won't be long!!!
Last edited:
for those that are having issues with the light draw, I found that I can take a piece of paper towel and tear a piece about 2 inches wide and the fold it in half to about 1 inch wide and wrap it around the carto itself, and then figure out how much it needs to fill the gap in the cone from the carto and then put the cone on and screw down. Mine you cant really even see the paper towel, but it slows the draw way down and also cuts out the whistling. pretty nice improvement.
so everyone knows, I think it was hairballs idea originally to use paper towel or napkin. and not sure how she was using it, but this does help
so everyone knows, I think it was hairballs idea originally to use paper towel or napkin. and not sure how she was using it, but this does help
There were several members that made different modifications to limit the airflow in the beginning but I think some had condensation issues so you might keep an eye out for that. According to Drew at Nhaler airflow is one of the most important things to make a carto function properly. That being said he also said he liked the iGo because it had a stiffer draw than the Go-Go. I didn't like the airy draw at first and it was my main complaint but after using it a few days I adjusted to it and now I don't mind it at all. I think most of the others that were modifying the airflow went back to using them the way they were designed. I'm not trying to discourage your modification and if it works good for you or others that is what counts. I just wanted to let you know if you begin to have issues with condensation or other things that might be the problem.
Hey Texas there were a couple of them for sale last night and I tried to PM you but your message storage is full.
I just got my new cartos for my gogo from nhaler and none of the 5 work wtf? or do i need to do something before i can use them? super upset.
I had a friend that emailed me and was having the same problem but I figured it was a battery problem but then he posts he is having a problem too so I realized I hadn't used any of my new ones of the same type and decided I had better check one of mine and it is working fine. I was wondering how he knew all five didn't work because I don't think Nhaler has any prefilled. They don't have any primer so they won't work without lots of juice in them.
I'm sure that is the problem unless he filled them all five full of juice. I think that is my friends problem now because she tried five and they didn't work either and I was just thinking she was having battery problems. I didn't think about the juice until I ran to check mine. I was thinking they had primer in them too and plugged one in and hit on it nothing so I filled it and it worked fine.lol
Well I just got my order of Go Carts from NHaler and they are still the old style model, but they work great on my Go Go as expected. Filled them up with 2.4 ml of juice before it started dripping out the bottom so lots of juice capacity on this one, and the TH and Vapor are absolutely incredible of course. Gosh I love my Go Go 
Nate AKA “Darth Vapor”
Nate AKA “Darth Vapor”
Well I just got my order of Go Carts from NHaler and they are still the old style model, but they work great on my Go Go as expected. Filled them up with 2.4 ml of juice before it started dripping out the bottom so lots of juice capacity on this one, and the TH and Vapor are absolutely incredible of course. Gosh I love my Go Go
Nate AKA “Darth Vapor”
Yeah, I just got 20 more delivered today from Nhaler. Half low res. I got them in stainless this time. Look a lot nicer but work the same....great. I also picked of ten of the new dual coil 510s to try on my Riva.
Txtumbleweed, just got my whistle tip in the mail. Thanks so much I'll give it a try.
Well I just got my order of Go Carts from NHaler and they are still the old style model, but they work great on my Go Go as expected. Filled them up with 2.4 ml of juice before it started dripping out the bottom so lots of juice capacity on this one, and the TH and Vapor are absolutely incredible of course. Gosh I love my Go Go
Nate AKA Darth Vapor
"Maybe this will help you some. This was posted way back before you received your first Go Go. This is easy to follow from SSV2. The trick to getting a full cart is patience.
I have been very successful at getting 3-ml in these Go-Carts providing you fill from the mouth piece end. I use a calibrated 5ml 1-1/2inch 21-gauge syringe and start by plunging needle all the way down to bottom of cart/ pumping aprrox. 1/2 ml at a time and rotating cart to ensure filler is saturated evenly.
I can easily get 2.5ml in at once before I might notice any liquid dripping out of battery end of cart. Usually very little if any..
I will wait about 15 minutes or so and then pump the remaining 1/2 ml in and have no excess leaking out at this point. Filler is completely saturated but not over filled!
I would not recommend filling these from battery end or even poking a paper clip or needle thru battery end because, atomizer sits horizontally in line with center tubing. These carts are unlike most standards where you can fill from battery end because, coil runs vertically up tube and usually will not be effected. Not the case here!
Results may vary depending on viscosity of e-liquid. I can easily get 3ml of any 100% PG based E-liquid without incident.
I have however, filled with several 50/50 blend's and achieved same result using syringe method.
Syringe filling is not for everyone! It is not a requirement.
The point is to keep it as simple as possible ...no fuss no muss!
If dripping works for most people then do whatever works best for you.
I have filled over 50 carts experimenting with a few different methods and using different ratios of PG/Vg e-liquid blends.. Dripping into mouth piece works fine.
I personally prefer the syringe simply because I can note consistancies from repeated fills.
Keep in mind that 20 drops do not actually equate to 1 ml unless we were dealing with distilled water?
I confirmed this by dripping directly into a small calibrated glass gradulated cylinder to measure accuracy of drops in relation to actual ml's.
This is why it is no surprise people are reporting they are getting anywhere from 80-120 drops to fill cart for the first time.
Les017 mentioned blowing into mouth piece end to clear excess liquid that could effect taste and works as a good follow up to topping off during repeated refills! It does work and also helps push any excess juice out of battery end of cart before you attach it back on battery.
Kudos to everyone that has contributed a lot of great info from their own personal experiences with the GO-GO as well the Ego T that has been very helpful to others just stumbling on this thread for the first time
SSV2"
I resemble that observation. I too thought that the light draw was a real problem at first and did a mod to "correct" it. But that lasted about 2 weeks. Now I am enjoying the light draw, just another thing about the GoGo that requires less work, IMO.
I also find that thicker juices wick better with the increased airflow, to the extent that some of my thickest get the additional treatment of being vaped without the cone...at least on cartos that have the wrapper. On the bare stainless ones, this makes no difference.
- Status
Similar threads
