Go-Go Specific: Thread for All things Go Go

Status
Not open for further replies.

Joebar

Full Member
Jul 6, 2010
23
2
USA
You can put a small rubber band on the bottom and cover a couple of the air holes. :) Do you think it's airy or just easy to draw? I don't find it airy.

I found mine perfect... Great, great hits! Only got about 2.5 days out of it though before the pull got hard and vapor/flavor was lousy. Gonna try the cleaning per the video above..
 

GoodDog

Vaping Master
ECF Veteran
Verified Member
Dec 31, 2009
4,160
1,008
SF East Bay
I found mine perfect... Great, great hits! Only got about 2.5 days out of it though before the pull got hard and vapor/flavor was lousy. Gonna try the cleaning per the video above..

When you fill it are you blowing out any that might have gone down the tube? It helps to do that if you haven't been.
 

sonicdsl

Wandering life's highway
Supporting Member
ECF Veteran
Verified Member
Aug 11, 2011
17,744
19,245
Go-Go Nation! :banana:

Don't miss the CYBER MONDAY sale at DiscountVapers - Your source for savings on electronic cigarettes and accessories! Eric has lowered the already low prices!

For example:

  • The new GGDCC's! 5-pack for $18.36!! (Works out to buy 4, get one free!)
  • (5) 5-packs of Boge SR 3ohm cartos (25 cartos!) for only $19.99 (only 80 cents each!) (limit 2 5-packs)
  • New Go-Go Kits also in S/S and Black (no cone) for only $42.40 and $41.95 (respectively)!!
  • And more!

Check it out while they're in stock. :D
 

mohawkx

Ultra Member
ECF Veteran
Mar 14, 2011
1,260
499
arizona
I found mine perfect... Great, great hits! Only got about 2.5 days out of it though before the pull got hard and vapor/flavor was lousy. Gonna try the cleaning per the video above..

I watched the cleaning video. I thought that once you've unwrapped the filler from the coils it looked like you could take the inner filler wrap off from around the coils and put the disassembled coils on a battery and dry burn them to like new condition. Then rewrap the inner filler around the coils and then the outer filler and essentially have a new carto out of the deal. I'll try this method once my first GGDCC starts to draw tight. The way these things work though, it might take a couple more weeks before that happens. :)
 

sonicdsl

Wandering life's highway
Supporting Member
ECF Veteran
Verified Member
Aug 11, 2011
17,744
19,245
Got my GGDCC's today from DV! The timing was perfect as I got a juice order in today as well, so I loaded up a couple of these, and WOW! Using these on my GoGo batts, and they hit really nice & clean!

I got a 510 to GoGo adapter also from DV today, and will try these on my PrecisePlus tonight when I get home from work.

So far these are a great addition to the GoGo Nation! :)

Sent from my Galaxy Tab using Tapatalk
 

mohawkx

Ultra Member
ECF Veteran
Mar 14, 2011
1,260
499
arizona
mohawkx, How long have you been using the GGDCC? Are we talking 3-4 weeks between cleaning/rebuilding? So this will be the first really rebuildable carto where you know if the filler is on right. I think I will have to take advantage of the sale and try these. Are you using these on a standard GoGo battery?

Urge

I've got about 7 days on one and it's working fine. I haven't tried to take one apart yet and see if it's wrapped the same as the emdcc's. I've been using the one strictly on a gogo. Very full, rich flavor and vapor.
 

txtumbleweed

Resting In Peace
ECF Veteran
Dec 7, 2009
6,418
9,433
Walla Walla
Attention all GoGo Nation: Dark City Vapor is having a rest of whats in stock sale (my own words :facepalm:) on GoGo Cartomizers 5 Pack for 6.99 plus a free bottle of juice WOW and GoGo drip tips for 1.95. Get them while they last :p

They didn't last long because they are out of stock on the cartos. They do have Go-go batteries for 10.00 which is also a good buy.
 

Bostonsnboxers

Ultra Member
ECF Veteran
Verified Member
Nov 9, 2011
1,085
736
NW OH, US
They didn't last long because they are out of stock on the cartos. They do have Go-go batteries for 10.00 which is also a good buy.

Well I joined the nation and picked up one of those puppies today ;) In 2 weeks I've gone from being a pad smoker (never heard of ecigs) to picking up a too expensive 808 kit on a whim, to a kgo (love it!), tanks, diy supplies, etc., and now a go go!!! I have no cartos or any way to charge it, but I've GOT one! lol!!

DV has the chargers, but is out of the adapters :(

I have GOT to stop reading the deals and steals thread ;)
 

Bostonsnboxers

Ultra Member
ECF Veteran
Verified Member
Nov 9, 2011
1,085
736
NW OH, US
Congratulations Bostonsnboxers!! You'll love the Go-go. Did you have a chance to pick up some of the Go-go dual coil cartos from DiscountVapers? Those are fantastic!!

Well no...I want to wait until they get more adapters in so I can place one BIG order! lol! I need a charger too....and a cone.....is the atty attached to the battery??

~Patti
 

Bostonsnboxers

Ultra Member
ECF Veteran
Verified Member
Nov 9, 2011
1,085
736
NW OH, US
The GGDCC (Go-go dual coil cartos) are cartos not attys and yes they attach to the battery with no need for an adapter or cone.

Ya, I figured that with the GGDCC's, I just wondered if there even WAS such a thing as a Go-Go atomizer as I've looked around and not seen any ANYWHERE. Read more of this thread though and found my answer ;)

I've used the DC's on my kgo (Smoketek 1.5) and frankly I prefer the single coil 1.7. Think I'll try the regular Go-Go cartos first...listen to me....I won't be using ANYTHING w/o a charger! lol!

~Patti
 

mohawkx

Ultra Member
ECF Veteran
Mar 14, 2011
1,260
499
arizona
FYI: I'll be doing a review and a How TO Rebuild the New GoGO Dual Coil Cartomizers in a new thread shortly as soon as I find my camera.
First off, the GGDCC's hit exceptionally well and is an exceptional product for the GOGo.

Yes, you can disassemble them completely, clean the filler AND(this is important) DRY BURN THE DUAL COILS!!!! You can reassemble them with little effort and they are essentially factory new, and good to go. I've done one but I didn't have a camera. As soon as I find my camera and another one gets tight on the draw, I'll do a picture tutorial of the entire process.

Oh, these do crack easily if any torque is applied to them like dropping them and they land on the carto at an angle. But the fix is very easy. Just gently pull the clear plastic tube off the base while it's screwed on to the battery. Turn it around and reinsert it over the filler and on the base with the cracked end at the lip end. Works like a charm.
 

asti

Super Member
ECF Veteran
Verified Member
Oct 14, 2010
483
95
TX. USA
There is a nice how-to on making syringe mods for CE2 innards when the initial runs casing were cracking/splintering from torque or juice issues, a dremel and 3ml monoject syringe... lop the ends off the syringe and slide the sleeve over the ce2 innards, and bob's yer uncle! surely theres an appropriate size syringe for a duallie
 

Kobudo

Super Member
ECF Veteran
Jan 16, 2010
399
18
Evansville, IN
FYI: I'll be doing a review and a How TO Rebuild the New GoGO Dual Coil Cartomizers in a new thread shortly as soon as I find my camera.
First off, the GGDCC's hit exceptionally well and is an exceptional product for the GOGo.

Yes, you can disassemble them completely, clean the filler AND(this is important) DRY BURN THE DUAL COILS!!!! You can reassemble them with little effort and they are essentially factory new, and good to go. I've done one but I didn't have a camera. As soon as I find my comes and another one gets tight on the draw, I'll do a picture tutorial of the entire process.

Oh, these do crack easily if any torque is applied to them like dropping them and they land on the carto at an angle. But the fix is very easy. Just gently pull the clear plastic tube off the base while it's screwed on to the battery. Turn it around and reinsert it over the filler and on the base with the cracked end at the lip end. Works like a charm.

So are they the same on the inside as the clear eGo mega dual coil cartos, with a main polyfil wrap over two vertical coils, with each coil having its own thinner wrap?
 
Status
Not open for further replies.

Users who are viewing this thread