good mod for nautilus rba

[deezdrama]

Im wanting a mod for the nautilus rba I ordered...

Wanting it to look streamline like a hybrid and thinking of either getting a provari beauty ring n putting it on my chrome provari...
Or...
Getting a mkb-ts clone or maybee a vamo.

Just wondering what everyone with an oddy clone is using mod-wise for a hybrid and streamlined look and if a mechanical mod is enough or is a vv or vw the way to go....thanks

 

[Chikenbok]

Yum... get a Poldiac...

 

[anavidfan]

The Natural looks great if you dont want to spend a lot of money, there are many sigelei. If you want something a more heavy or mid range the Mkb-ts is a GG clone so it would work great. THe Roller by Atmizoo is also nice and clean designed and not hard to get or overly expensive.

Just remember the Terminator is a copy of the Odysseus V1 so it doesnt have the air channels. It has a small ledge along the 510 connection and its not going to sit flush to the top cap of your vaporizer without a gap. I know that if you are handy you could probably take a dremel and sand the ledge off and maybe make some channels on the bottom to get air flow also.

 

[WattWick]

My Terminator C has a larger diameter than my Natural. Doesn't look too good to me. Not sure if the Nautilus is slimmer.

 

[Kanj.nguyen]

23mm tanks like Term-C looks good with Sigelei mechs like the 19. I am thissss close from picking up a Term; only thing stopping me is... all my other devices crowding my desk.

 

[dwcraig1]

The choice is clear, GGTS or MKB-TS and of coarse put an Oddy GGTS base on your Nautilus.

 

[Technonut]

The choice is clear, GGTS or MKB-TS and of coarse put an Oddy GGTS base on your Nautilus.

Exactly... The MKB-TS, Oddy /GGTS adapter, and Terminator (Nautilus) is a fantastic combo. The air-control is perfect, and the connector turns it into a hybrid. The connection is 10x stronger than the 510... Rock-solid...

MKB-TS: $ 59.99 (There's a coupon code somewhere to save even more) MOV MKB-TS (GGTS Clone)

Oddy / GGTS Connector: (use coupon code "bigbuyer" ) New Odysseus Base-GGTS

 

[deezdrama]

Wow.... I was almost going to buy a used mkb-ts for $59 so I appreciate the links!

 

[deezdrama]

Im def going to go with the mkbts and that adapter!

Thanks for the nudge in the right direction craig and technonut!

Im new to all this gg stuff, the amount of parts has always overwhelmed me but now im close to having a great clone setup.

So just to make sure.... with the gg adapter base- I wont need to order anything else to make my connection?

Love the idea of ditching the 510 connection for a rock solid one!

Anyone use a kick in theres or is it not needed with the oddy clones? I got a kick a year ago but not sure if it works... I had it in a bolt for a while but then seemed like it wasnt increasing wattage... tried it in my udt6 and couldnt get it to fire so .... I dont know.... if its worth the effort I might get it out for testing

 

[Technonut]

Im def going to go with the mkbts and that adapter!

Thanks for the nudge in the right direction technonut!

Im new to all this gg stuff, the amount of parts has always overwhelmed me but now im close to having a great clone setup.

So just to make sure.... with the gg adapter base- I wont need to order anything else to make my connection?

Love the idea of ditching the 510 connection for a rock solid one!

Anyone use a kick in theres or is it not needed with the oddy clones? I got a kick a year ago but not sure if it works... I had it in a bolt for a while but then seemed like it wasnt increasing wattage... tried it in my udt6 and couldnt get it to fire so .... I dont know.... if its worth the effort I might get it out for testing

Glad to help... No, you won't need any other parts besides the Oddy/ GGTS base to make the connection. As for the Kick, it works fine, but you would need to use a 18490 batt to fit it. I have been using the Crown in mine. It has the option of VV OR VW, and fits into the MKB-TS with an 18650 batt.. Super T ~ Artisan Vaping

It all depends on what kind of vaping you want.. The Kick / Crown will limit you to a minimum of around 1.2-1.5 ohm coils. If you want to go lower than that, they won't make you happy. Personally, I prefer 6 to 8 watt vaping, and I like the consistent power the Crown offers until the batt dies..

 

[deezdrama]

My oddy clone just shipped, just ordered the mkb-ts and the adapter.... cant wait!
I havent been so excited over a mod since getting my provari

Guess I have alot of reading up to do since I know nothing about gg mods or building an oddy atty.

 

[Technonut]

IMO, the MKB-TS is the biggest bang-for-the-buck value out there currently. I've owned a couple of GGTS, AVS, AFS, UFS in the past, and the MKB-TS works just as well as the GGTS. The machining and threading is very nice, and the SS is heavy-duty.

I hit mine with some Mother's polish, and it looks great, while not being a fingerprint magnet. Here is a pic of mine with the Terminator and Oddy/GGTS base installed. (The knurled collector tank base is an add-on part I purchased to give a better grip while taking it apart, and holding it while vaping)

 

[deezdrama]

Ya, thats a sweet looking setup there!
Did u have to use a polishing wheel or just by hand?

How much was the knurled base?

 

[Technonut]

Ya, thats a sweet looking setup there!
Did u have to use a polishing wheel or just by hand?

How much was the knurled base?

Thanks! I've been having a blast piecing this rig together. I have a conversion kit ordered from a guy on a forum from Poland which will turn the Terminator into a Kayfun-type atty. (No more joining NR/R wires together) The kit was $57.21 shipped. I think he still has a list going for future runs.. (use Google or Bing translator) Upgrade Nautilusa | Kopie / Klony | E-papierosy-forum.pl

I just hand-polished the MKB-TS. The knurled GGTS collector tank connector was $35.00. GG Knurled Connector | Silica Wicks. Be aware, it's the entire 510 connector piece, and you would either need to mod a firing pin (like I did) or purchase the GG internals for it. http://www.cloudsofvapor.com/store/...s/734-ggts-replacement-connector-insides.html One could also use the GG version which offers some grip for less $$. GGTS Replacement Steel Connector

I like the knurled better, and didn't mind helping the vendor out since he is disabled, and lost use of his legs.

Come on over to the two big threads if you haven't already. Loads of info, mods, and tips...

http://www.e-cigarette-forum.com/forum/apv-discussion/401929-mkb-ts-mechanical-mod-ggts-clone.html

http://www.e-cigarette-forum.com/fo...choddy-oddy-clone-pics-tip-tricks-quirks.html

 

[WattWick]

The choice is clear, GGTS or MKB-TS and of coarse put an Oddy GGTS base on your Nautilus.

If I read this right, the Oddy GGTS base would make this into some sort of a hybrid? Does it fit the Terminator C?

 

[deezdrama]

Term-c and nautilus are the same thing from rainbow as far as I understand so it will fit the same on a term but ill let an oddy vet chime in for confirmation...

 

[Technonut]

If I read this right, the Oddy GGTS base would make this into some sort of a hybrid? Does it fit the Terminator C?

Yes, The Oddy/GGTS base is installed on my Terminator C in the pic above...

 

[deezdrama]

Hmmm... it says on MOV that a real gg collector tank will thread onto the mkb-ts and allow an oddy to thread onto the naitive gg connection....

This is the adapter I ordered but it isnt called a "collector tank" - just want to confirm I ordered the right part
New Odysseus Base-GGTS

Sorry- trying to wrap my head around it all.... it will be obvious once I get the mod, atty, parts in my hand

 

[Technonut]

Hmmm... it says on MOV that a real gg collector tank will thread onto the mkb-ts and allow an oddy to thread onto the naitive gg connection....

This is the adapter I ordered but it isnt called a "collector tank" - just want to confirm I ordered the right part
New Odysseus Base-GGTS

Sorry- trying to wrap my head around it all.... it will be obvious once I get the mod, atty, parts in my hand

MOV is incorrect in their listing...The GG collector tank and MKB-TS collector are the same threading. What you ordered will fit and work well.

 

[deezdrama]

Just wanted to make sure I got the right part-thanks

I have a bunch of 1 or 1.5mm wick and kanthal 32... what would u suggest my setup be? 4 strands with 2 running the channels and top 2 cut off at the cup with a 4-5 wrap coil?

I got nr wire coming with the oddyclone and been watching build vids and on the vid the guy ran it like above but not sure if he had original or v2