Got My New Manual Mini Pipe!

[Mary Kay]

It came today! I had a batt charged as soon as I saw the package hit New York. I am vaping on it as we speak.

Nice vapor, good flavor and a 4 hour battery life..I just timed it!

I have tried it with the pipe atomizer it came with, an 801 atomizer (the ones with the silver ring work..the ones with the black ring don't!)
And a 901 atomizer with a 801 to 901 adapter.

I also tried a cartomizer on it (with a 801 to 901 adapter)..no problem but it's way short! I needed to add the manual 901 extender from my charger to give it some length. Kind of Frankenpipe looking! But tasty.

Now I need to girly it up! Black matte is not my style..so ideas anyone? I thought of doing a paint job..maybe a white rose. A couple of nail stickers?
Happy Halloween!

 

[Mary Kay]

I forgot to ask..is the pipe sealed? I know it's manual..so I assumed..well you know what they say about assume. The hole into the pipe section doesn't look sealed and of course the atty isn't. can I seal it myself? It shouldn't need an air flow.
Sealed is the whole reason I went with manual.

 

[NandyDC]

I forgot to ask..is the pipe sealed?

At least mine is not sealed. I will check if works sealed.

Update: Yes it works, a little bit harder the draw. I dont know if is me but it improves the vapor also.

 

[Mary Kay]

Ok I got some info..they need to be unsealed because of the constuction of the pipe atty's..they need air flow. But the switch is located up and to the side so I am fairly certain there will be no stuck switches. But to be sure when I am done for the nite, the atty will come off!
I just changed to batt 3..that's 9 hours of only vaping the pipe. NOT bad!
Today was unusual though..I normally don't vape all day.

Happy Halloween.

 

[SpringMotion]

my main gripe with the mini-pipe is that the cap unscrew too easily (you put it in your pocket, and the chances the cap remain in their place is very thin)

has this changed with the manual pipe ?
the cap screws more firmly ?

sometimes I dream about the mini-pipe 2.0 ...

 

[Di]

Nice to see you two chatting it up about your pipes,

altho it may seem like trivial conversation to some

this interaction between you - our valued menbers -

is essential, ans extremely helpful ----

it allows all memebers to see the questions,
and the answers,
so with your experiences, and by posting and chatting here,
you are helping other members,

thank you both for your contributions,
very much appreciated

 

[Mary Kay]

Mini Pipe Try this forum Spring! The people in there have some suggestions about keeping the cap on. It's in the model specific section here in ECF.
I haven't had a problem yet, but then I haven't had it but 10 hours...lol!

Happy Halloween!

 

[Di]

my main gripe with the mini-pipe is that the cap unscrew too easily (you put it in your pocket, and the chances the cap remain in their place is very thin)

has this changed with the manual pipe ?
the cap screws more firmly ?

sometimes I dream about the mini-pipe 2.0 ...

some things never change spring ---- and I am sorry to say

that this hasnt changed, mine still comes off way too easily,

that link from Mary Kay is a goodie, I will try some of these ideas.....

 

[Mary Kay]

The rubber yucky taste is finally gone form my cart tip (the soft one) Now I like it! Can't somebody do something about that? I washed it and it still had that "taste". Between breaking in new atty and now tips..good grief it hard to find my happy place!

 

[Di]

The rubber yucky taste is finally gone form my cart tip (the soft one) Now I like it! Can't somebody do something about that? I washed it and it still had that "taste". Between breaking in new atty and now tips..good grief it hard to find my happy place!

Aaaaaah, but when you find it Mary Kay------

worth every second of trying, waiting, and testing ------

Di = rabbit hunter !!!!!

 

[franklyspeaking]

Does the Janty 801 to 901 adapter that was made for the Janty Stick work on the manual mini pipe?

 

[Mary Kay]

That's a good question! The question should be does the janty adapter work on any 801 to 901 product. Not just janty. I will go find out!

Update, it works on the 901 end for sure, because it's allowing you to use a dse901 atomizer on a Janty stick. Now to find out about the other end

 

[Mary Kay]

From what I have read, DSE 801's can be used in the Janty. so that means the threads are ok. My 801 to 901 adapter from Vaprlife works just fine. But mine is very tiny just the size of a gold ring found on the 801. I don't know how big Janty's is..they don't picture it alone.
I think it would work, but I am waiting for some answers in the general E-smoking forum.
These adpters can also be purchased from Lite-cig and Truesmoker ..it's used for their Vapr51's. (same as my VP1)

 

[Mary Kay]

Does the janty adapter look like the one in the picture..the mini pipe the gold adapter and the 901 atomizer.

 

[Di]

That's a good question! The question should be does the janty adapter work on any 801 to 901 product. Not just janty. I will go find out!

Update, it works on the 901 end for sure, because it's allowing you to use a dse901 atomizer on a Janty stick. Now to find out about the other end

From what I have read, DSE 801's can be used in the Janty. so that means the threads are ok. My 801 to 901 adapter from Vaprlife works just fine. But mine is very tiny just the size of a gold ring found on the 801. I don't know how big Janty's is..they don't picture it alone.
I think it would work, but I am waiting for some answers in the general E-smoking forum.
These adpters can also be purchased from Lite-cig and Truesmoker ..it's used for their Vapr51's. (same as my VP1)

Does the janty adapter look like the one in the picture..the mini pipe the gold adapter and the 901 atomizer.

Excellent post here Mary Kay-

thankyou so much for this, info---

I am a huge 801 fan,
if it has 801 I will smoke it-- ha ha ha
so I am always interested in adapters
to make things compatable to my fav attys

 

[Mary Kay]

I am still gathering info..lots of great people helping me on ECF!
You know Di, I am not a fan of the 801..I have never tried a 801 battery though. I have atty's for my VP1 and of course for the mini pipe..I am trying to like the 801, but I just like the 901 better. That's why I love adapters, they make it easy for me to switch things up and try everything with everything else!
I just don't get why the people who make these things don't get that.

Happy Halloween!

 

[Mary Kay]

Quote:
Originally Posted by nevergonnaleavetn
The Janty 801 to 901 adapter looks like an 801 atomizer but is about 1/4 inch shorter.
It has an 801 connector on one end the other end is open. The connector for the 901 atty is deep inside the tube so that the 901 atty is totally inside the adapter when installed.
The end of the 901 atty is flush with the end of the tube. Hope that makes sense.


So the adapter will be the same as having an 801 atty on the pipe..but with a 901 atty screwed inside! Ingenious. But all in all my little adapter works just fine..lol!
Hope this helps you Frankly!

Happy Halloween!

 

[Di]

I am still gathering info..lots of great people helping me on ECF!
You know Di, I am not a fan of the 801..I have never tried a 801 battery though. I have atty's for my VP1 and of course for the mini pipe..I am trying to like the 801, but I just like the 901 better. That's why I love adapters, they make it easy for me to switch things up and try everything with everything else!
I just don't get why the people who make these things don't get that.

Happy Halloween!

I know, we all have our preferences, some better for flava
some better for vapor,
we choose to give us our ultimate vaping bliss.........

I adore the 801 and have done for 10 months-

but I do try other things as well and some are very good.
EM 4 is prime example-------
but ultimately I always go back to the 801 atty
and whatever I am using with it-

I never understood why all the batts and atty threads were different--
untill some one explained it to me

to sell them of course
if they all had same threads
we only need buy 1 set of battys and then try all attys with it

it would be very very very convenient, but not good for the sellers
so the adapters are an ingenious invention and in high demand

the smaller the better,
and endcaps are the ideal,
so no extra length is added-----

mmmmmm --- we can all dream huh ??????

 

[franklyspeaking]

Wow! Thanks for all the good info. It looks like it should work then. It would probably give the manual mini pipe a better look since the Janty adapter looks just like a 801 atty.

I have just one more question about the manual mini pipe before I pull the trigger on one. How is the switch? Does it reliably fire with each press of the button or are there dead presses, similar to the early runs of the 510 batteries? Thanks!!

 

[Mary Kay]

I have had no problems with misfires. My problem is remembering to push the button!
I found a guy in the Janty forum who used the Janty 901 adapter with his mini pipe and likes it!
The way I figure it every device has it's place, for me the mini pipe is a relaxing vape..good for watching movies and sitting outside! It would be a good vape on a long drive.

Have a great Halloween!