Hard draw from vape?

[Alayna]

Can you look at the coil you have and compare to picture?
Let us know if you can.

Mine is 10-25

 

[djsvapour]

How many drops should I be putting in?

I tend to do 4 direct to the top (mesh), screw it onto the chimney and then 3 or 4 per juice hole.
If your coil is rated 10-25 then you're using the 0.6 (I'm guessing) and it might be a little tighter than the 0.5. They are designed with varying airflow. Personally I'd be surprised if the 0.5 (I use them) and the 0.6 are much different though. The 'Claptons' are just odd. Not great for vapor or flavor. Strange idea I.m.o.

 

[Topwater Elvis]

The replacement head marked 10-25W is the 1.0Ω / resistance, it has a smaller hole through the center for airflow.
The .6Ω, 1.0Ω & 1.5Ω heads have a more restrictive/tighter draw than the .25Ω, .5Ω and rba heads.

 

[Spacewaffle]

Mine is 10-25

So 10-25w is the one you like? or is that the one thats too tight of a draw?

Because the first one in the picture left to right
SS316
.05
15-30w
Is a very airy draw and its for Straight to Lung hitting (like a asthma inhaler just deep inhale)

Second
SS316
.06
15-28w
Is a much more restrictive draw for Mouth to lung hitting (like a conventional stinkie kind of draw)

Third
SS316
1.0
10-25w
Is same as second Mouth to lung draw but possibly even tighter than second.

So Im thinking if you had first one the .05 15-30w first the used second or third after without knowing the difference and they were much tighter draw.

 

[Alayna]

So 10-25w is the one you like? or is that the one thats too tight of a draw?

Because the first one in the picture left to right
SS316
.05
15-30w
Is a very airy draw and its for Straight to Lung hitting (like a asthma inhaler just deep inhale)

Second
SS316
.06
15-28w
Is a much more restrictive draw for Mouth to lung hitting (like a conventional stinkie kind of draw)

Third
SS316
1.0
10-25w
Is same as second Mouth to lung draw but possibly even tighter than second.

So Im thinking if you had first one the .05 15-30w first the used second or third after without knowing the difference and they were much tighter draw.

10-25 is the one I'm having issues with. I just dug out the old one that I liked and it's 15-30. I didn't know there were different ones. I've just been going to the local vape shop and asking for the coil that goes with my vape. Maybe that's the problem here.

 

[Topwater Elvis]

Yep, that's your problem.
The one marked .5Ω 15-30w has a looser / airier / less restrictive draw / more airflow than the one marked 1.0Ω 10-25w

 

[Spacewaffle]

10-25 is the one I'm having issues with. I just dug out the old one that I liked and it's 15-30. I didn't know there were different ones. I've just been going to the local vape shop and asking for the coil that goes with my vape. Maybe that's the problem here.

Yep, that's your problem.
The one marked .5Ω 15-30w has a looser / airier / less restrictive draw / more airflow than the one marked 1.0Ω 10-25w

Yep
So you want a SS316 .05 ohm coil. Tell your shop that.
Actual name of coil, for if and when if you might end up stocking up online is
BF SS316 .05 ohm.
By the way BF stands for bottom feeding
SS stands for stainless steel.
So bottom feeding stainless steel .05 ohm coil.
Joye Cubis Atomizer Head Replacement Coils and SS316 Notch Coil

They have some. I used this site few times they are ok in my opinion. Just make sure you select correct one from drop down menu.
Yep it says cubis coil something I don't know but they are right ones for AIO.
Okie cheerios! Good luck!

 

[Alayna]

Yep
So you want a SS316 .05 ohm coil. Tell your shop that.
Actual name of coil, for if and when if you might end up stocking up online is
BF SS316 .05 ohm.
By the way BF stands for bottom feeding
SS stands for stainless steel.
So bottom feeding stainless steel .05 ohm coil.
Joye Cubis Atomizer Head Replacement Coils and SS316 Notch Coil

They have some. I used this site few times they are ok in my opinion. Just make sure you select correct one from drop down menu.
Yep it says cubis coil something I don't know but they are right ones for AIO.
Okie cheerios! Good luck!

awesome! Thank you so much.

 

[Alayna]

I stopped by my local vape shop and got a 15-28 coil and my problem is solved! Thank you so much for your help everyone!

 

[Marius Botha]

so, im new to vaping. I got a joyetech AIO a month ago and have been having some problems with it. It seems like every other time I replace the coil, I have issues. I prime the coil by putting five drops of e-juice in it and let it sit for a few minutes. Upon using the new coil, it's hard to draw from the vape, and the taste is really muted. Does anyone know why this could be happening?

When you replace the coil first wet it with some juice and let it sit for 5 minutes or so before vaping otherwise the new coil will burn again

 

[Marius Botha]

If you want to have a better vape experience get yourself a Ijust 2.

 

[Marius Botha]

Let me say Hi first as I am new here to the forum.

 

[Smoke_too_much]

I would have suggested putting the offending coils, only, to your lips and trying to breathe through them. If this was the restriction you are referring to then you know it's the coil's bore size that is the problem. On the other hand if it breathes fine then it is something else restricting the air flow, such as the flow adjustment.