Hardest Hitting mech mod POLL !!
- Thread starter zee91105
- Start date
- th_trl_thread_readers 0
- Status
Brass tube and silver contacts should produce the best hit, also the battery plays into the equation too, and of course the atomizer, build and ohms, oh and lets not forget the juice being used nic mg and VG/PG ratio and the distance of the build from the air intake and amount of air flow....... A more important question would be which has the least voltage drop, because everything else is totally subjective and prone to user error and preferences. That said, I love my nemi, and expecting the Origin around Christmas. Come on Santa!!!
The last comparison I saw gave the brass Nemi the win with the smallest voltage drop with and without a load on. But he only had around 7 mechs to compare. Bottom line, if you own it and love it then that's the best one.
The last comparison I saw gave the brass Nemi the win with the smallest voltage drop with and without a load on. But he only had around 7 mechs to compare. Bottom line, if you own it and love it then that's the best one.
Out of the box without having to fix/change a thing I would have to say my Reo wins hands down. However I look for most consistent hit more than least voltage drop. Worse out of the box was my Zen-2. The spring looked like something they salvaged from an old ball point pen resulting with every hit being different. A $3 spring from Altsmoke made it a solid performer.
The brass magneto hits like a truck in my experience. Compared to my wifes silver plated nemesis my brass magneto hits harder.
I can make the best mod hit worst than the worst mod.
Its all about what you build in your delivery device
I think your question should read " Which mod has the least voltage drop"??
Its all about what you build in your delivery device
I think your question should read " Which mod has the least voltage drop"??
ANd really, what do you mean by "hit's hard"? are you looking for a huge throat hit or are you looking to get the huge clouds. I like a little throat hit but I want some serious vapor as well. I notice if I go too crazy my throat is killing me in the morning. I was playing around with some coils last night and my throat was raw this morning. I couldn't vape for 2 hours. So back to the point, get a little more specific although I am going to say that your coil is going to play into it more than anything unless your mod has something wrong with it. Also if you have underpowered batteries would probably affect it as well, but if all the mods had the same batteries and you used the identical coils in identical attys then I'd say the difference is going to be negligible. I could be wrong on that as I am still waiting on my first mech to arrive. But i am familiar with building a coil and how much that affects it.
As stated above, I think it all depends on what you have on top, and the batteries you are using (for sub-ohm etc). I have a SID, MVP 2, Vamo 3, Natural Mech, Astro Mech, a few Egos, a Sidewinder, and an E-pipe that only takes 18350 batteries. As long as I have good (as in high amp) batteries, I can make my little teeny tiny E-pipe hit like crazy. Also , I have been using RBA's. Only use a tank when I know I wont be able to drip.
I'll second that. All else being equal, a crappy wick/coil combo will ruin the experience.
That being said, I have a clone mech with a clone dripper on it that's hitting monstrously hard right now. I use a copper-based anti-seize on the threads, and have a 0.5 ohm single ribbon coil with cotton wick that's working quite nicely.
I've also got a Panzer and an Atomic RDA that I've had for well over a week, but unfortunately I've been so busy I haven't had a chance to play with it yet, but I've heard some good things about them and have high hopes.
Bay City Vapors XXIX pretty much zero voltage drop, doesn't get any better than this
I wonder what the throat hit would be like with a 24mg juice...
I think that the design of the mech is just as important as (if not more important than) the conductivity of the materials used. Although stainless steel, foot by foot, is more resistive than brass, silver, and copper, you're still talking about resistance values in the nanoohm range.
Last edited:
I played around with a nemesis clone and a smoktech magneto which both hit surprisingly hard for chinese mods.
I have to start by saying that I do not have time to go the RDA route So I am limited to 1.5 ohms with my Iclear 30, 30S and x.1 . I find unregulated mods not really efficient with my clearomisers. The Kick is the solution.
I have a magneto, but to get a comparable hit and vapor density to my Zeus or my VTR I absolutly have to put in a Kick to regulate the battery output higher than 3.7 volts. It work great, but I am limited to the shorter siblings of the 18650. Without a Kick it can not compete with the Zeus or VTR.
I also have a Hades 26650, It really last all day and more, but it is HUGE. But again 3.7 volts just wont do it for me. I have a Kick adaptor coming in the mail, it should solve this problem. It will also increase the length by 1/2'' .
I have a magneto, but to get a comparable hit and vapor density to my Zeus or my VTR I absolutly have to put in a Kick to regulate the battery output higher than 3.7 volts. It work great, but I am limited to the shorter siblings of the 18650. Without a Kick it can not compete with the Zeus or VTR.
I also have a Hades 26650, It really last all day and more, but it is HUGE. But again 3.7 volts just wont do it for me. I have a Kick adaptor coming in the mail, it should solve this problem. It will also increase the length by 1/2'' .
- Status
Similar threads
