No, not at the moment. Other than trying them out and seeing which ones perform better than usual. I'll see if we can get this done
Thank you mucho
Have a Question?
- Thread starter halopunker
- Start date
- th_trl_thread_readers 0
-
- Tags
- altsmoke smokeless image
- Status
Thank you mucho
question on the SB as I have just started looking between these and the Omega. I see some people mention vaping the SB at 3.7 and at 6v, but don't see any other numbers mentioned. Is this a VV?
The SB and the Omega are not VV devices. They both take 18650 for 3.7v and if you're wanting 6v you can stack 2 16340's. Best ones i've found are the AW Lifepo 16340's. For the 18650 i use the AW IMR or Ultrafire XSL 2600mah. Hope that answers your quesiton.
Yep that answers it. Thanks so much!
I love the way that the Omega looks, and that the button for firing it is where it is at. I am currently vaping on an Ego 650 mah and I can't taste most of my juices on it due to a constant sinus issue. I am looking for something that has the size of the Omega (it will be easier on my hands). I don't know if getting the Omega and some special cartos, or attys that will let me taste the juices I use will work?
My ego with contoured drip tip and 650mah battery is just slightly taller than the omega without atty and tip . just to give you a length comparison. As in being in your hands the Omega is obviously larger in diameter, however is contoured and feels perfect. If you're not putting your PV in your pocket this is the absolute best MOD on the market. The SB is as well, has a resessed button so it doesn't go off in your pocket, however it's a bit larger. my number one favorite part of the Omega, and some may disagree, are the resessed rings on the top. when juice overflows the rings catch the juice so it doesn't flow down the side. then next time i pick it up since the atty vents are flush with the top, it bottom feeds the juice back into the atty. LOVE THIS FEATURE, and wish the SB had these rings added
That size would be very nice to have in my hand. I am now sitting here here trying to figure out what would be best for me. I hate trying to make decisions like this.
I've just started using Yeti 510 LR cartos just a couple days ago and one of them is working and tasting perfectly, but I have two others that, after being filled and left for sit for a while, has a nasty burned flavor and a really harsh burning throat hit.
Maybe I'm doing something wrong? I even blew through them to check for any primer but nothing came out. I love the one that is working properly so...maybe some how I screwed the two "bad" ones up.
Any advice and help will be appreciated. Thanks!
Maybe I'm doing something wrong? I even blew through them to check for any primer but nothing came out. I love the one that is working properly so...maybe some how I screwed the two "bad" ones up.
Any advice and help will be appreciated. Thanks!
I've had my Omega for 2 weeks now. I disassembled it to see if how simple it was..following Chad's video.
Now I've noticed that the head is kind loose? Or it wiggles a bit.
Is this normal?
Now I've noticed that the head is kind loose? Or it wiggles a bit.
Is this normal?
Not really a bobble head . I was able to put it back together fine, but the head wiggles.
It's kinda annoying..
I took it apart and put it back up just a few minutes ago, but it still wiggles..
I have a little tiny bit of wiggle on mine. My space is about the height of a quarter after using the dime to put it back together. Is it firing?
When I figured out what the issue was it had to do with me not getting the fat part of the contact snapped in when I put it back in. It will actually kinda snap in. Hold it there then tighten one of your screws, then let go (you will still be holding it, but have the gap). There should be a bit of gap. Use a dime when doing this. After you tighten that first screw and let go then you can tighten the others. It shouldn't be wobbly after that.
I did that, put it back with a dime and with no dime...still wiggling
I'll try it again later when I get home.
I'll try it again later when I get home.
It took me an hour and watching the video four times and the dime to get mine back together. It sounds like yours is being stubborn.
There has to be some wiggle, else you would not be able to activate it. There has to be clearance. The fact it is at the top of the unit and not surround by metal it seems amplified
There has to be some wiggle, else you would not be able to activate it. There has to be clearance. The fact it is at the top of the unit and not surround by metal it seems amplified
ok that's comforting to hear.
thanks!!
From what I was understanding there was a wobble not a wiggle. Lol I like my Omega doing its lil wiggle. It likes to dance. Don't mind me guys its 2:42 am. Kat is working for target and is on the "damn its early" shift three days a week. Lucky me has to get up and take her. Lol
- Status
