HCigar Nemesis clone. Maybe my last clone purchase ever .-.

[JayPahp]

Hi guys i bought the hcigar nemesis clone and the hammer clone. The hammer is working great. i built my first clean micro coil and its "chucking the vapor". But my nemesis clone won't fit the 18650 at all. I removed the kick ring and it still wont fit. Any tips?

 

[steved5600]

Some protected 18000s are a bit longer. I find the ones that say protected are longer. Nemesis will not do 18650's with the kick most won't. May want to try other batteries. My Magneto will only do kicks with smaller batteries or an after market extension tube. The Chi You also has an extension tube available. May want to see if one is available for the Nemesis. OH they also make kicks that come in a housing that screws into th 510 connection and the atty screws into that. Nemesis is a good mod. I will look for an extension tube and post it if I find one.

 

[steved5600]

Ok some nemesis clones come with a kick ring but i found out that if you use an AW battery they are shorter. Hope this is of some help. Could not find an after market nemesis ring for sale.

 

[tmcase]

You didn't say whether the battery was too long or too short so here goes.

If you are using a button top 18650 try using a flat top. Preferably something like a Panasonic CGR18650CH IMR battery. If you are using a flat top battery, try using a button top IMR. The nemesis clone is suppose to take either. If the battery isn't making contact try stretching out the spring. If your battery still isn't making contact then an earth magnet on the button of your battery might help.