HCigar VT Inbox (VTinbox) - evolv VT75
- Thread starter Ramsay Bolton
- Start date
- th_trl_thread_readers 0
- Status
Yes, it's excellent on a lanyard 
My SDNA with either OBS Nano or Avocado 24 had been my walk around/weekend setup on a lanyard. The Inbox with Wasp keeps me with a dna, gets me to even better flavor, and is equal or slightly lighter than the sdna+tank setup. Slightly stronger magnets would be nice, but the doors aren't going to come off unless it takes a hard hit, plenty good enough for me.
(Mech Pro and other heavy mods are fine when I'm at a fixed spot, but for walking around and being active I've used lanyards over 6 years, not about to stop now [emoji3])
I do have some thinner metal ecig rings coming in, will switch out the black silicone when that happens.
My SDNA with either OBS Nano or Avocado 24 had been my walk around/weekend setup on a lanyard. The Inbox with Wasp keeps me with a dna, gets me to even better flavor, and is equal or slightly lighter than the sdna+tank setup. Slightly stronger magnets would be nice, but the doors aren't going to come off unless it takes a hard hit, plenty good enough for me.
(Mech Pro and other heavy mods are fine when I'm at a fixed spot, but for walking around and being active I've used lanyards over 6 years, not about to stop now [emoji3])
I do have some thinner metal ecig rings coming in, will switch out the black silicone when that happens.
Yes, it's excellent on a lanyard
My SDNA with either OBS Nano or Avocado 24 had been my walk around/weekend setup on a lanyard. The Inbox with Wasp keeps me with a DNA, gets me to even better flavor, and is equal or slightly lighter than the sdna+tank setup. Slightly stronger magnets would be nice, but the doors aren't going to come off unless it takes a hard hit, plenty good enough for me.
(Mech Pro and other heavy mods are fine when I'm at a fixed spot, but for walking around and being active I've used lanyards over 6 years, not about to stop now [emoji3])
Pics or it didnt happen
ive been craving a pocket clip on a squonker so im actually curious about how you mounted this...
Use a non-sealed 510 extender, I just picked up 2 more from Smoktek. The positive connector is hollow, for squonking.
A standard ego lanyard may have a clip that is a bit too wide, but the black silicone rings from fasttech work, and I just ordered a 7 pack of lanyards (all of like $5 [emoji5]) from them that uses a narrow metal ring, should be good.
$4.32 Free Shipping eGo Lanyards w/ Thin Ring Clips for E-Cigarette (7-Pack) (7-Pack(7-color)) at m.FastTech.com
A standard ego lanyard may have a clip that is a bit too wide, but the black silicone rings from fasttech work, and I just ordered a 7 pack of lanyards (all of like $5 [emoji5]) from them that uses a narrow metal ring, should be good.
$4.32 Free Shipping eGo Lanyards w/ Thin Ring Clips for E-Cigarette (7-Pack) (7-Pack(7-color)) at m.FastTech.com
The rumor is that they are going to be making a DNA 75C version, but I have not seen any confirmation of that.
The only place I know you can find them is on Fasttech right now. I would pick one up they are well worth the wait.
I was highly interested in maze 3 but after watching geekyvape review on YouTube I'm going to wait a while.
Seems there is a design flaw with maze 3.
I'll have to go watch that, it wouldn't be the first nice looking RDA that doesn't work properly.
I haven’t seen the video -- by chance do you have a link? Couldn't find it on YouTube.
My own experiences have been unsatisfactory. After using the Maze 3 for a week, it’s probably going to be spending far more time on the shelf than on a mod. Some of my dislikes:
> Airflow with the 3 hole tube is horribly turbulent. A bit better with the 2 hole tube but still not what I’d call smooth. Loud as well.
> So-so build quality. Granted, I only paid $14 for it, but even so, I have $5 clones that are built better. Weak o-rings on the cap; flimsy o-rings on the tubes (shredded 2 so far)
> Poor design on the squonk pin. It should have a diverter to direct the juice to the wells (which are reasonably sized), but instead is just a simple tube. So, when you squonk, juice gets into the airflow tube before it makes its way to the well.
On the upside, it does look nice and is easy to build. Bit more open than a Hadaly, but still on the restricted side. Decent flavor. Still, the cons outweigh the pros for me by a long shot.
Thanks for the update on the Maze 3, that is another one I can scratch off my list.
I have an Aeronaut 24 (V2) and an Armor 1.0 inbound that should be here next week. Here's hoping they have minimal issues. I'm waiting for a few versions (SER or SXK) of the Mulciber clone before I grab one of those.
Thanks for the update on the Maze 3, that is another one I can scratch off my list.
I have an Aeronaut 24 (V2) and an Armor 1.0 inbound that should be here next week. Here's hoping they have minimal issues. I'm waiting for a few versions (SER or SXK) of the Mulciber clone before I grab one of those.
If your looking for a good BF RDA, check out he Pulse22. I highly recommend it
I had the Pulse in the cart a few times.
I think the Gorge will be my next grab and a Pulse might just fall into the cart with it...
Another excellent single coil flavor RDA is the KLS, I run it on the DB2 at 55W with a 28g fused clapton. Unique airflow easy coil mounting and all Ultem inside. The only issue is if you don't like drip tip, there are no replacements that I know of.
SXK KLS Style RDA Silver 22mm 316 SS Atomizer w/ Bottom Feeder Pin
I had the Pulse in the cart a few times.
I think the Gorge will be my next grab and a Pulse might just fall into the cart with it...
Another excellent single coil flavor RDA is the KLS, I run it on the DB2 at 55W with a 28g fused clapton. Unique airflow easy coil mounting and all Ultem inside. The only issue is if you don't like drip tip, there are no replacements that I know of.
SXK KLS Style RDA Silver 22mm 316 SS Atomizer w/ Bottom Feeder Pin
Well when the Gorge arrives, share your thoughts, I also have been eyeing that one.
If anyone does want to do a squonk lanyard setup, a small oring on the extender male 510 can be used so you don't get any leakage. I use one of the small black rings from an Avocado24 spares kit.
Nice that the Wasp is, it has gone into the spares box, being replaced by the Armor 1.0. Quite flavorful and it doesn't whistle!
28g fused Clapton.
Dem brown o-rings!
28g fused Clapton.
Dem brown o-rings!
I'm lucky. Based on my power draw Wasp hasn't been a whistler. Have to check out the Armor [emoji5]
I think you might just like the Armor, I picked up the YFTK version and Ultem drip tip.
YFTK Armor 1.0 Style RDA 316 SS 22mm Rebuildable Atomizer w/ BF Pin
YFTK Brown PEI 14mm Drip Tip for Armor 1.0 Style RDA
Dies the Armor play well in single coil mode (I'm a lower power wimp, mid 20s)
I have a single fused clapton in it right now, and I can't see any reason why a smaller build wouldn't work very nicely.
- Status
