HCigar VT200
- Thread starter MegaVap
- Start date
- th_trl_thread_readers 0
- Status
yeah i am always near a computer or in my car with usb access lol ....
the evolv one as the XT30 battery?
what is the brand for the 1000mah you saw ?
thank you
This is the one evolv used / sells: http://www.protovapor.com/product/fullymax-11-1v-3s-900mah-30c-lithium-polymer-battery-pack/
It doesn't have a XT30 connector.
they even sell the xt30 conenctor .. but "
BARE BATTERIES CANNOT BE SHIPPED INTERNATIONALLY"
.. battery explosion scares....
well i bought a 800mah 30c for now ... need to solder my own xt30 (not a problem) .... its same size pretty much as the old battery...
wondering if the battery included is really a 1300mah ... or just a lie ...
so this is the battery that i use now .. 800mah ..
for anobody who need one localy ...
800mAh 3S 11.1V 30C LiPo, 18AWG JST
Product Specifications
Type: LiPo
Capacity: 800mAh
Voltage: 11.1V
Connector Type: JST-RCY
Wire Gauge: 18 AWG
Weight: 2.3 oz (65g)
Length: 2.75 in (70mm)
Width: 1.00 in (25mm)
Height: 0.75 in (19mm)
Maximum Continuous Discharge : 30C
Maximum Continuous Current : 24A
wondering if the battery included is really a 1300mah ... or just a lie ...
so this is the battery that i use now .. 800mah ..
for anobody who need one localy ...
800mAh 3S 11.1V 30C LiPo, 18AWG JST
Product Specifications
Type: LiPo
Capacity: 800mAh
Voltage: 11.1V
Connector Type: JST-RCY
Wire Gauge: 18 AWG
Weight: 2.3 oz (65g)
Length: 2.75 in (70mm)
Width: 1.00 in (25mm)
Height: 0.75 in (19mm)
Maximum Continuous Discharge : 30C
Maximum Continuous Current : 24A
Last edited:
Nice glad u found one that'll work. I'm going tonight to grab a spare. I'll let u know the brand. I think they are flight max. They are designed for airplanes and helis
They all fib a little. Only way to truly measure your capacity is to run the battery through cycles on a true lipo charger and average the results. I've found every battery I've owned, in rc or Vaping, to be incorrect. Some rare cases are higher than advertised most are lower. The cheap ones are typically much lower. I won't even get into c ratings...the ultimate fib.
One prime example is the max amps 1850mah 3 cell Lipo. I found that even tho it should be 20.5 watt hours by its specs it actually only comes out to 16.5 ish in escribes analyzer. Just something I noticed based on some mods I've seen that came with it and calibrated already like the militia mod.
Hcigar doesn't warranty the battery as they have that stated I do believe on the FB page. I would have to go find it. they should warranty everything.
FB page: https://www.facebook.com/Hcigar
Not that they post much or answer inquiries it seems
Not that they post much or answer inquiries it seems
No sales to pick up am extra blue vt200 so I just got some ti wire from fasttech
So I'll let you guys know how it works w/ ti in 4 weeks
Kinda pumped for dual 24ga + potentially something fully stupid like dual parallel 24
So I'll let you guys know how it works w/ ti in 4 weeks
Kinda pumped for dual 24ga + potentially something fully stupid like dual parallel 24
Thats good to know. No issues with the f. 510 threads. Was concerned for buyers.
No, no issues thus far for me. And, if you check out any of the YouTube reviews, many of the reviewers reiterate that they have have had no problems either. Now, I know brass is a softer material so I'm not gonna abuse the 510 lol but one reviewer even stated that Hcigar consulted with Evolve in making this mod and brass was decided upon as the 510 material due to it's conductive capability.
I got question for u guys. I'm using crown tank with ni200 coils. On my sig 150tc I get a great vape at 45j and 400 f. But on my vt200 it seems to need higher temps and watts to get the same vape . Any idea why that is I'm guessing the sig is pumping more than it shows on screen or the dna is just more accurate. The dna 200 is way better as far as temp contollers is concerned but having to pump up the number has me wondering why.
Both mods read the same ohms and I've correctly setup the vt200.
Edit . I'm guessing it has to with joules vs watts. I just want to fully understand what's going on lil better so any help will be greatly appreciated
Both mods read the same ohms and I've correctly setup the vt200.
Edit . I'm guessing it has to with joules vs watts. I just want to fully understand what's going on lil better so any help will be greatly appreciated
Last edited:
I'm not positive but I would say your correct that the sigelei is just putting out a little to much power while the VT200 is just more accurate. I can definitely say the DNA 200 is the smoothest vape by far. And I love these dual twisted titanium coils and playing with SS. I've never got such a amazing vape.
Is there a noticeable difference between ss and ti?
On the dna200 at least
It was hard for me to compare on ipv4s because of the varying gauges and low power
On the dna200 at least
It was hard for me to compare on ipv4s because of the varying gauges and low power
I believe there is a pretty big difference in consistency with the two wires. Ti seems to be as of now much more stable while SS which does work and gives a great vape is just more jumpy especially while looking at he device monitor in escribe.
The DNA200 is making an assumption that the resistance it reads is partially mod resistance, If you measure and set mod resistance in escribe, is should get close to the same. So, for a .2 coil for example your first mod fires it as if it was a .2 coil. The DNA fires it as if it was a .2 coil less the value it has for mod resistance.
- Status
