HCIGAR VT75

[Wingsfan0310]

slm" data-source="post: 18534813" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

What do you guys usually "build" with stainless?

Single coils, twists? Etc...

I usually build on an Aromamizer Supreme. I normally just build simple 2.5mm, 7 wraps, spaced, dual coils. With the 28ga SS430 it comes out to ~.31 ohms. I vape at 420F 30 watts with 60 watts preheat, 5 punch, for 1 second. Very nice vape imo.

Cheers,
Steve

 

[SLM]

I have an Aromamizer Supreme also on order.

 

[Eskie]

I use simple 2.5 or 3 mm coils either 26G or 28G. Nothing fancy for me.

 

[Insanelysick]

What do you guys usually "build" with stainless?

Single coils, twists? Etc...

Been a vanilla single or dual could build kind of guy but just built a single ss317 fused Clapton in my RDTA and I'm a convert! Also chuck dual ss317 claptons in my velocity and it's pretty beastly!


Sent from my iPhone using Tapatalk

 

[SLM]

My VT75 showed up today along with a pair of AWT yellow batts. And the 200 feet of 28g SS430! And an OBS Ace tank!

Now... Should I take the 75 out of the plastic wrap.... or not?

 

[TrollDragon]

My VT75 showed up today along with a pair of AWT yellow batts. And the 200 feet of 28g SS430! And an OBS Ace tank!

Now... Should I take the 75 out of the plastic wrap.... or not?

Nah, you could just delay the awesomeness that is the VT75 for a little longer...

 

[SLM]

Nah, you could just delay the awesomeness that is the VT75 for a little longer...

Hahahahaha! Actually messing with one of my VT133's right now. I have something out of whack and it thinks... I think... that there is a dead battery because it's looking for 3 cells instead of 2. :-\

 

[TrollDragon]

Hahahahaha! Actually messing with one of my VT133's right now. I have something out of whack and it thinks... I think... that there is a dead battery because it's looking for 3 cells instead of 2. :-\

In the eScribe software, under the Mod tab you probably changed the Battery Capacity option to 3-cell instead of 2-cell.

 

[SLM]

Hummm... What version of Escribe is that? I don't have that option. :-\

Edit... I have 1.2sp3

Edit again... At least I figured out what I did... I put the VT200 .ecig file from DJL on it.

 

[Wingsfan0310]

Hummm... What version of Escribe is that? I don't have that option. :-\

Edit... I have 1.2sp3

Edit again... At least I figured out what I did... I put the VT200 .ecig file from DJL on it.

On the top of Escribe click on:
Options > User Interface > Manufacturer
Then you will see the mod tab.

Cheers,
Steve

 

[SLM]

Ah, okay. Thanks! I have the mod tab but only two options I think. The safety one and battery cutoff currently. I'll check that way when I get home!

 

[opticruby]

My ohms were jumping all over the place on my VT75 and lower wattage being applyed to the coil (all wattage below, instead of 35w), then I found a post on another site about a cathode screw on the underside of the mod, tightened it a fraction of a turn and now everything is working perfect, no flashing battery (exept when the battery is too low to supply the requested voltage, which is normal IMO), and the ohms are solid on kA1 builds.

Has anybody else had to tighten this 'cathode screw'?

 

[TrollDragon]

My ohms were jumping all over the place on my VT75 and lower wattage being applyed to the coil (all wattage below, instead of 35w), then I found a post on another site about a cathode screw on the underside of the mod, tightened it a fraction of a turn and now everything is working perfect, no flashing battery (exept when the battery is too low to supply the requested voltage, which is normal IMO), and the ohms are solid on kA1 builds.

Has anybody else had to tighten this 'cathode screw'?

I checked mine before I fired it up the first time to make sure it was tight.

 

[opticruby]

I checked mine before I fired it up the first time to make sure it was tight.

I just wasnt sure if I did the right thing tightening it, seems to have sorted things out though.

 

[SLM]

On the top of Escribe click on:
Options > User Interface > Manufacturer
Then you will see the mod tab.

Cheers,
Steve

Got it! Thanks! I had it set to advanced so I didn't see that screen. Set it like you said and yep, it was set to three cells. I put another whole file on it but it's too late to play much today. I try it out more tomorrow.

Need to look around and see if I can find some others pictures for the theme screen too.

 

[TrollDragon]

Need to look around and see if I can find some others pictures for the theme screen too.

There is a whopping pile of them here, it's a little slow since it's on GoogleDrive.
IDrive-Sync_action_nest_135 - Google Drive

 

[SLM]

There is a whopping pile of them here, it's a little slow since it's on GoogleDrive.
IDrive-Sync_action_nest_135 - Google Drive

Cool, thanks!

 

[SLM]

Just to keep this on track... Anybody else get a VT75 lately?

 

[Monotremata]

Just to keep this on track... Anybody else get a VT75 lately?

Seriously considering it in the next couple of days hehe.. I just got a Sigelei Spark last month, and its perfect with my KF5. But Im ordering a Cthulhu V3 here in a couple of days as well, and that thing is a huge 25-27mm diameter atty that is going to look really weird on the Spark. I was planning on getting the Sig 213 or the Fuchai 213, but after just reading the threads in the VV/VW forum, I think Im gonna pass on another Sigelei. Found the VT75 for a little cheaper then the Sig too, and Id finally have a real DNA mod. I still got some reading to do on it but it seems most people dig it so far. I never use TC, and stick to at most 20w in power mode on my Spark so it should do just fine.

 

[SLM]

Seriously considering it in the next couple of days hehe.. I just got a Sigelei Spark last month, and its perfect with my KF5. But Im ordering a Cthulhu V3 here in a couple of days as well, and that thing is a huge 25-27mm diameter atty that is going to look really weird on the Spark. I was planning on getting the Sig 213 or the Fuchai 213, but after just reading the threads in the VV/VW forum, I think Im gonna pass on another Sigelei. Found the VT75 for a little cheaper then the Sig too, and Id finally have a real DNA mod. I still got some reading to do on it but it seems most people dig it so far. I never use TC, and stick to at most 20w in power mode on my Spark so it should do just fine.

Sounds like you found a good deal on the VT 75! I'll be honest, i haven't opened mine yet but I have a SMY sDNA 75 and it's a nice box. The VT 75 has to be nicer with a 26650 battery. ;-) Comparing it to the 213 is practically impossible, Lol! I have the Fuchai 213 and it's good in power mode but no DNA box IMO.

Currently vaping my VT 133 in TC with a nickel build.

With that Cthulhu V3, I think the VT 75 would be nice!

I'd like to see pictures of that.