HeavenGifts: Win Joyetech Cubis+Cuboid combo, a new SS316+TCR vaping experience you shall try

[liblue1]

 

[cooladdict]

Happy New Year, Blue!

 

[YoursTruli]

 

[cooladdict]

Happy New Year, Truli!

 

[liblue1]

Happy New Year, Blue!

To you as well cool............

 

[cigatron]

@Vera , here's another build with Nife52 Alloy. Steam Engine Data here: Coil wrapping | Steam Engine | free vaping calculators

Crius rta with 25g NiFe52 alloy, 6/5 wrap, 2.78mm ID, .07 ohm build. Wicked with Rayon it performs nicely on my DNA200 at 420°f.

When get home I'll graph the vape in escribe and post it here.

Update: So here's a 3sec vape on my Crius with the NiFe52 build shown above. Graphed by my DNA200. Nice and warm, not hot.

 

[cigatron]

@Vera , I am interested in understanding more about the M1, M2 and M3 settings in the TCR mode. Is the TCR adjustable within each "M" setting? If not, what is the actual programmed TCR of each "M" setting?

Also, do you know the actual programmed TCR for the VT-Ni, VT-Ti and VT-SS316 modes.

If not, no probs, just thought I'd ask.

 

[Marina2]

@Vera , here's another build with Nife52 Alloy. Steam Engine Data here: Coil wrapping | Steam Engine | free vaping calculators

View attachment 519398
View attachment 519399
Crius RTA with 25g NiFe52 alloy, 6/5 wrap, 2.78mm ID, .07 ohm build. Wicked with Rayon it performs nicely on my DNA200 at 420°f.

When get home I'll graph the vape in escribe and post it here.

That's just beautiful.
Vera's gonna have a lot of nice coil pics to check out when he gets back from vacation. They're like art to me.

 

[cigatron]

That's just beautiful.
Vera's gonna have a lot of nice coil pics to check out when he gets back from vacation. They're like art to me.

So sweet, as always @Marina2 . Thanks, I hope she likes them.

 

[Shawn Hoefer]

@Vera , I am interested in understanding more about the M1, M2 and M3 settings in the TCR mode. Is the TCR adjustable or fixed within each "M" setting? If not, what is the actual programmed TCR of each "M" setting?

Also, do you know the actual programmed TCR for the VT-Ni, VT-Ti and VT-SS316 modes.

If not, no probs, just thought I'd ask.

I do not know the TCR values being used in the device, but I can tell you that the M1 M2 and M3 values are NOT fixed. I am currently vaping a dual coil 430SS .5 Ohm build in a Mutation X4 on my eVic VTC Mini. The TCR in M1 was set to .00138 (which just reads 0138 on the screen). At 440F, it's a great vape and NO dry hits. I have also wicked with rayon. The coils are rather used at this point, or I would post pics...

In the TFV4, using the TF-R2 deck, I also have dual 430SS coils (I really like 430, by the way), with the same settings on the SMOK XCUBE II, and I'm getting a very similar vape... without the dripping, of course.

My iSitck 60 has a Kanger Subtank Mini built to .53 with Ti#1. There's a .2 Ni200 build in my Erlkonigen on the Ele 70... It'll take too long to list all of 'em

 

[BamaBabe4Ever]

Congrats @jseah WTG

 

[Vera]

I'm new to the forum, so I don't know anyone to tag. I'm also pretty new to vaping. I tried about a year ago on an Aspire CFVV and Nautilus Mini setup. Made it about six months and went back to cigarettes. This time I started with an iJust kit. Then I bought the iStick TC60W with the Melo 2 and went straight to temp control. I ran the nickel coil heads with it. Now I'm using the TFV4 with the single rba kanthal it came with. I'm going to pick up some nickel or titanium wire soon and try building one of those.

Nice share!! Though you cannot tag anyone, it is OK. This is a valid entry!!

 

[Vera]

@Vera , I am interested in understanding more about the M1, M2 and M3 settings in the TCR mode. Is the TCR adjustable within each "M" setting? If not, what is the actual programmed TCR of each "M" setting?

Also, do you know the actual programmed TCR for the VT-Ni, VT-Ti and VT-SS316 modes.

If not, no probs, just thought I'd ask.

Wow, so many nice builds!! Well done!!
The TCR adjustable within each "M" setting is adjustable!

 

[Vera]

Guys, I believe that all of you are convinced by @cigatron 's builds posts. So for the 2nd winner, we select @cigatron as our vape master.

@cigatron Please PM me your shipping address and email address.

And we have 2 winners left to be chosen, namely vape rookie and vape veteran. Bump for more entries!!

 

[mac63]

Congrats cigatron!

 

[redrebel821]

Yay, @cigatron !!!!!'

 

[Axelbeam]

Congrats


Sent from my iPhone using Tapatalk

 

[BamaBabe4Ever]

CONGRATS @cigatron

 

[Shawn Hoefer]

Grats @cigatron

 

[cigatron]

Thanks everyone. I feel all warm and fuzzy. Can't wait to run the Cuboid through it's paces.